windows 7 build in hardware diagnostic Results


Page 1 of 2.
Results 1...20 of 22

Sponsored Links:



Hello I'm having issues with my desktop shutting itself down and giving 2 different errors DISK BOOT FAILURE and BOOTMGR is MISSING I've been trying to figure out the problem for a while suspecting the SSD issues at first and no just generally suspecting that it could be anything in my entire PC. I'd like to know if there are any troubleshooting diagnostics I can run to find out whats going wrong?

What follows is the whole story, you can read on if you think you can help me out with finding the problem of these errors or skip to my theories of what went wrong and post with any helpful information regarding self diagnostics

---->>
I installed an OCZ SSD as part of a brand new desktop build about 5 months ago everything worked perfectly fine, with an X58A-UD3r gigabyte motherboard and intel core i7 processor, with 6GB of RAM. The ssd being used as the boot drive and a samsung HDD 1TB used as the true storage.

About 3 months ago I noticed that occasionally the computer would turn its self off randomly just straight to black screen, it didn't seem to be at times when I had alot of programs open or using alot of cpu it just happened sporadically which I ignored at first, then it started to give an error BOOT DISK ERROR which I googled and found several fixes for ssd problems with windows 7, I looked into making the ssd more detectable with windows 7 and making sure that it was plugged into a sata as master rather than slave, and also that in the BIOS it was set as the primary boot drive but the problems didn't go away and eventually the computer would last about 5 - 10 minutes after being turned on before it went black screen and died, so I managed to log in and back up my ssd to the hdd and install windows on the hdd and boot from that which i tried for a week and it seemed to run fine so I formatted the ssd and the hdd and did a fresh install of windows 7 on the ssd this time making sure all the settings for it to detect ssd's were in place from the beginning which seemed to work fine for a few weeks but now I've been getting the same errors with the same frequency but with another one added as well - DISK BOOT FAILURE as well as BOOTMGR is MISSING the latter error seems to be over come by selecting to boot from the ssd even though it is set as the main boot drive.
---->>

What I'd like to know is how can I test which part of my PC is going wrong as I can think of tonnes of theories but with no real idea how to test them ???
Here are a few theories/queries -

-the ssd is faulty and keeps crashing the system
-windows is not properly adjusting to there being an ssd boot drive and a hdd storage and keeps attempting to boot from the hdd or is itself faulty
-There is a fault with another component of my desktop? motherboard? Power source (its 500W, I did calculate for all the parts but how can i tell if something is using more than its supposed to?) ? processor?
If any one could help provide some insight into diagnosing the problem that would be a great help

Thanking you in advance
Lem x




Hi guys,
I come back to you after some time away in a happy place where tech support is never needed, once again humbly requesting your expertise.

When my laptop hinge busted, I salvaged the HDD and decided to mount it in my next desktop build and use it until I bought another HDD to sell it with. This drive was partitioned with a dual boot of Win7pro64 and Backtrack 5r1 64, both were pretty well maintained, no foreseeable issues with swapping the drive, right?

Well, we seem to be having some technical difficulty, on both fronts. As this is sevenforums, Ill restrict this to my Windows 7 issues, but for any bilingual folks out there that are interested, I'm posting the other half of the dilemma on linuxquestions, sparing them the windows part of it lol. Ill add a link to it once its up.

Okay so here is the hardware setup I am working with.

Asus M5A97 mobo, amd970/sb950 chipset, is rated to support all components
AMD FX-8120 CPU Black Edition
16 GB G-Skill Sniper pc3-12800 ram
XFX nVidia GeForce 6800GT 256MB GDDR3 (I can hear your snickering )
Raidmax 630w PSU
Samsung Supermulti Optical
WD Scorpio Black Laptop SATA HDD

Everything listed is brand new, purchased online, save for the HDD of course. The video card was purchased used at the local computer shop, last-minute.

So just let me explain the nvidia card real fast I planned this build assuming my old HD3870 would work just fine, but it went out on me almost right away. I had it hookup up to a coby tv with a 1366x768 resolution, which is what the nvidia card is powering now as well, via DVI-I output to a DVI to HDMI adapter, then through an HDMI-HDMI cable to the tv, same as the HD3870 was (in case any of that proves relevant). My original intention was to leave this setup open for crossfire if I found another 3800 series. I should note that while the HD 3870 was working, I had booted it up alright and gotten to the boot animation for Windows 7 once. It then proceeded to reboot, after which my video card was toast and I could not get a successful POST. Now that the card is changed, here is what I am experiencing.

When I boot up, I get a POST beep, I go into the BIOS, everything is looking tip top. I select the HDD, everythings still going fine. Since I am running a dual-boot configuration, GRUB is my boot manager. I select the Windows 7 Boot Loader, and I have the option to run startup repair or try to boot normally. I tried the startup repair a few times. The first time it said attempting repairs, then said it would reboot and either boot successfully or continue startup repair. It does not boot up fine, in fact, I get a BSOD. I try the startup repair again, only for it to tell me the problem couldnt be fixed automatically. Well it gives me two options, to either view advanced details in a log file of some sort, or to log in to a user account to run some diagnostic utilities.

The log shows no errors of any kind - I went through each instance of startup repair and they were all negative for each category. There was one "root cause" listed for each attemp which said that 'a recent hardware change' may have caused this to happen. I was told by my college professor who holds an advanced certification for Windows 7 that you could swap a Windows HDD to another computer, and all that would happen is most hardware would default to Windows generic drivers, and you would have some short window of time to reactivate Windows within, due to some sort of built in anti-piracy feature throwing up red flags at the substantial hardware change. Have I been ill-informed, or do I have bigger problems than that?

I logged into my administrative account and the options provided are as follows: Startup Repair, System Restore, System Image Recovery, Windows Memory Diagnostic, and the Command Prompt.
Startup Repair just fails and loops me back, System Restore can't find any restore points (very odd), and System Image Recovery is unusable for me since I never made a backup image. I ran the memory diagnostic as well as chkdsk /f, as advised, and neither found any errors. Selecting the Commant Prompt option, my working directiory is x:windowssystem32. I can switch over to c:, and I can access all of my files, personal, applications, and system alike, which appear to be intact (much of this I have verified via examination from my Backtrack/Linux partition).

Well, I've taken the Windows 7 course, and I don't want to screw around with finding the perpetrator behind my misfortune if I don't have to - I'll just do a side by side install, throw everything on c: into the "Windows.Old" folder, and get the ball rolling on re-crafting my setup, followed by some housecleaning. I have my original product key, all I have to do is pop in that install disc, right? Save the day? I could not have been more wrong.

I actually get a blue screen error while booting from the install disc. This is burnt with an iso obtained from MSDNAA, a legitimate copy of Windows 7 Professional 64 bit, the SP1 Debug Rollup. It's what I used to install the Windows 7 that is currently failing that I'd used for well over a year, and the Windows 7 on another machine I'd built. The serial is registered to me and it was all free through my college. When I did my second install, upon activation I asked if I would need to request a new serial since this one had been used, and was told NO, that my serial is MSDNAA specific, usable as many times as I'd like for academic purposes. You cannot even retrieve these from the system using means that would otherwise produce the correct key - it will come back as five sets of five B's. These are the only two times it has been used and this most definitely does not count as a third since it is the same OS, HDD, owner, serial, and disc even.

Circling back to the BSOD, the interesting thing to me is that the exact same blue screen error comes up while booting my Windwos partition as while attempting to boot from CD to reinstall. Is that significant? I know the terminology sort of clumps them all into the same category, but surely there is a correlation, no? I thought perhaps I was going crazy, and Windows had set some bit switch on the HDD that says "Help, I'm supposed to be in a laptop!" but this does not explain the CD.

I have tried to boot into safe mode, have tried Automatic System Recovery (which im given to understand is the same as Startup Repair), but no cigar. ASR behaves as startup repair did and safe mode = bsod. I have attached a picture of the error screen for reference. I have a copy of Ultimate Boot CD for Windows on my USB drive, but there is a plethora of utils and I dont know how to use most of them. If there is a specific tool that could remedy the issue or shed some light on the situation, I can certainly collect info and report back.

Pic: BSOD
http://i98.photobucket.com/albums/l2...mface/bsod.jpg

Thanks in advance, all you guys!




Hi there. Earlier today my computer 'froze' (cursor was still active but firefox and then explorer got the shady, frozen screen, screen) and I had to manually power it down. Upon restarting, I hit 'start windows normally' and it then loaded through to the windows 7 logo screen and froze.

Anyways, this is the third time this has happened on this computer. The first time was on the 7th of this month, then I reformatted/installed and had no problems. Happened again a week later and I reinstalled and dual-booted with ubuntu. No problems with that up until today when it happens yet again.

Amongst these downtimes I've tried the startup repair options available on the recovery partition and startup disc except system restore, which every time has said that there were no restore points available (which, stupidly, I never checked or made a manual restore point but I know there should've been points from the months prior to the first incident and from before windows updates). I've also ran windows memory and hard drive tests, memtest86 on each individual stick, and many passes with all installed, as well as western digitals hard drive diagnostic.

So at this point, I'm thoroughly stumped. Does anybody here have any ideas or ways to narrow it down to software or hardware? Thanks in advance.

Specifications:
Windows 7 RC Build 7100 x64
- Ubuntu 9.04 x64 dual boot
EVGA X58 SLI MB
Intel i7 920 CPU
6 GB OCZ 1866 DDR3 RAM
1 TB Western Digital HDD
TX750W Corsair PSU




Ok i upgraded from xp32 to windows 7 build 7100 x64 and i get random bluescreens when i download. Its very random sometimes i get lucky and it won't but i hardly get through a 30meg file without it bluescreening. Using steam games download it happens very often so cant get my games.

Thought it could be a memory problem but have done a windows memory diagnostic tool test and had no errors and come to conclusion that playing games like Assasins creed and Prototype for like 5/6 hours without a problem means its not a hardware/software its just a bug with downloading.

--------------------------------------------------------------
Hardware

Motherboard - Asus p5k
Processer - Intel Quad Q9550 @ stock
Graphics card - Nvidia Geforce 9800 GTX
Memory - 4gb Corsair DD2 Twinx 8500

--------------------------------------------------------------
- No yellow flags in Device manager

Anyway here is a image of the bluescreen

And after i turn it back on this comes up in a window

Problem signature:

Problem Event Name: BlueScreen
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:

BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF88002C9D02A
BCP3: FFFFF88008B86C60
BCP4: 0000000000000000
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:

C:WindowsMinidump61709-25989-01.dmp
C:UsersJamesnsAppDataLocalTempWER-37908-0.sysdata.xml

---------------------------------------------------------------------

Well thats really all i can think of to put on here if you want anything else say...
I might try a full clean install but im quite a noobie with formating and thought installing the windows 7 formated the HD and reading some posts on here i guess it dont. So if anyone can help me out here as well would be appreciated.
Thanks in advance




Hello,

I got a brand new computer and I already seem to be having some trouble, so I stumbled into this website hoping someone could help and maybe take a look! Anyway, here are some details.

Details
-OS: Windows 7 (Build 7601: Service Pack 1)
-System type: x86 (64-bit)
-Current OS same as original
-OS is an OEM
-2 month old computer
-OS has not been reinstalled
-Manufacturer: Alienware
-Model: M17XR3
-Processor: Intel Core i7-2720QM CPU @ 2.20GHz
-Video Card: NVIDIA GeForce GTX 460M
ท (?) MotherBoard: 5VYM9 Motherboard
ท (?) Power supply: Delta AC/DC Adapter, Model GA240PE1-00, Input 100-240V, Output 19.5V

Archive this for future use, M17x-R3 Parts - Alienware Forum - Alienware Club - Dell Community(here are more computer specifics, most of which I think are correct of mine, though if there are any discrepancies between this link list and the ones I hand wrote, go with the ones I hand wrote, as I had a few things upgraded when I ordered it)

Attached is a list of goodies I compiled, please let me know if you guys need more info. I ran the cpu-z program and got screen shots of the spd and memory tabs, got the three most recent dumps, and RaMMon report as a text document too. The BSoD usually occurs while I'm gaming and if it helps, my gameplay has become stuttery around the same time that I started getting BSoD's.

Thanks in advance,
CVC Attached Files cpuz, rammon, dumps.zip (2.41 MB, 20 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 08-17-2011 #2 Captain Jack Tier 2 Moderator Microsoft MVP - Windows Expert
(IT Pro)  
Join Date Mar 2010 Posts 959 Blog Entries1 Re: BSoD 0x9f Hello and Welcome!

Seems like the crash is caused by ACPI.sys which may not be the problem. I would recommend to run a Hardware Diagnostic (RAM and hard drive) Hardware Diagnostic | Captain Debugger Run the SF Diagnostic Tool and post us the whole report.

Code: ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* DRIVER_POWER_STATE_FAILURE (9f) A driver is causing an inconsistent power state. Arguments: Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time Arg2: fffffa8008153a10, Physical Device Object of the stack Arg3: fffff800051ad748, Functional Device Object of the stack Arg4: fffffa800eafc330, The blocked IRP Debugging Details: ------------------ DRVPOWERSTATE_SUBCODE: 3 IRP_ADDRESS: fffffa800eafc330 DEVICE_OBJECT: fffffa8008149e40 DRIVER_OBJECT: fffffa8006fc3e70 IMAGE_NAME: ACPI.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294 MODULE_NAME: ACPI FAULTING_MODULE: fffff88000f8b000 ACPI DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x9F PROCESS_NAME: MassEffect2.ex CURRENT_IRQL: 2 LAST_CONTROL_TRANSFER: from fffff80002d36cd2 to fffff80002cc8c40 STACK_TEXT: fffff800`051ad6f8 fffff800`02d36cd2 : 00000000`0000009f 00000000`00000003 fffffa80`08153a10 fffff800`051ad748 : nt!KeBugCheckEx fffff800`051ad700 fffff800`02cd45fc : fffff800`051ad830 fffff800`051ad830 00000000`0000fffc 00000000`00000002 : nt! ?? ::FNODOBFM::`string'+0x34a90 fffff800`051ad7a0 fffff800`02cd4496 : fffff880`00fbe2b0 00000000`0006808f 00000000`00000000 fffffa80`0e57b010 : nt!KiProcessTimerDpcTable+0x6c fffff800`051ad810 fffff800`02cd437e : 0000000f`7a4bab73 fffff800`051ade88 00000000`0006808f fffff800`02e42468 : nt!KiProcessExpiredTimerList+0xc6 fffff800`051ade60 fffff800`02cd4167 : fffffa80`07e24cc2 fffffa80`0006808f fffffa80`07e1e000 00000000`0000008f : nt!KiTimerExpiration+0x1be fffff800`051adf00 fffff800`02ccb765 : 00000000`00000000 fffffa80`0e668660 00000000`00000000 fffff880`09220480 : nt!KiRetireDpcList+0x277 fffff800`051adfb0 fffff800`02ccb57c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KyRetireDpcList+0x5 fffff880`0e180e20 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchInterruptContinue STACK_COMMAND: kb FOLLOWUP_NAME: MachineOwner FAILURE_BUCKET_ID: X64_0x9F_IMAGE_ACPI.sys BUCKET_ID: X64_0x9F_IMAGE_ACPI.sys Followup: MachineOwner




In this article, we will give an overview of the technical side of Project Detroit, the Microsoft-West Coast Custom Mustang creation. If you're not already familiar with this project, you can find more information here.
Key Design Decisions

It’s important to keep in mind that this car was built for a TV show with a set schedule. As a result, there are a number of unique design decisions that came into play.

Schedule

Working backwards, the reveal for the car was set for Monday November 28, 2011 at the Microsoft Store in Bellevue, Washington. We started the project in early August, which gave us approximately 12 weeks for research, development, vehicle assembly, and testing. This was by far the #1 design decision as any ideas or features for the car had to be implemented by the reveal date.
Off the Shelf Parts

Another key design decision was to, where possible, use off-the-shelf hardware and software in order to allow interested developers to build and reuse some of the subsystems for their own car (at least the ones that don’t require welding). For example, instead of buying pricey custom sized displays for the instrument cluster or passenger display, we used stock Samsung Series 7 Slate PCs and had West Coast Customs do the hard work of building a custom dash to hold the PC.

Hardware and Networking

The car is packed with a variety of computers and networking hardware.

Instrument Cluster Slate – This slate is on the driver's side and manages the instrument cluster application and the On-Board Diagnostic (OBD) connection to read telemetry data from the car.Passenger Slate – This slate, which is built into the passenger's side, runs a custom Windows 8 application (see Passenger slate below).
Laptop 1 – This laptop runs the REST service to control different parts of the car, the Kinect socket service for the front Kinect, and the user message service to display messages on the rear glass while driving.Laptop 2 – This laptop runs the Heads Up Display (HUD) service, the Kinect socket service for the back Kinect, the OBD-II database, and Azure services.Windows Phone – A Nokia Lumia 800 connects via WiFi and a custom Windows Phone 7 application (See Windows Phone application below).Xbox 360 – The Xbox 360 displays on either the passenger HUD or the rear glass display.Networking – A NETGEAR N600/WNDR3700 wireless router provides wired and wireless access for everything in the car, which is used in conjunction with a Verizon USB network card plugged into a Cradle Point MBR900 to provide an always-on 3G/4G LTE internet connection. The slates, laptops, and Xbox 360 are connected via CAT5e cable, while the Windows Phone 7 connects via WiFi.
Note: One of the limitations of the Kinect SDK is that if you have multiple Kinects plugged into one PC, only one of those Kinects can do skeletal tracking at a time (color/depth data works just fine). Because of this, we decided to have a dedicated laptop plugged into the front Kinect and another laptop plugged into the back Kinect in order to allow front and back skeletal tracking at the same time. If we'd not used simultaneous skeletal tracking, we could have combined all of the systems onto a single laptop.
Architecture

Here is a quick overview of the application architecture.

REST Service Layer

The REST Service Layer allowed different systems talk to one another. More importantly, it allowed different services to control hardware they normally wouldn't be able to access.

Thin client approach
The solution we chose was to have all the services that control different parts of the car reside on the laptops and have client applications like the Windows Phone application send REST commands to execute an action so the service layer would execute the request.REST-enable hardware
Controlling hardware should be invisible to the consuming clients. For example, hardware that requires USB communication would be impossible to control with a Windows Phone. The service layer allowed us to control hardware in a way that was invisible to the end user.Helper Libraries
To simplify communication with the service layer, we built a set of helper classes to abstract out repetitive tasks like JSON serialization/deserialization, URI building, etc. For example, to get the list of car horn “ringtones”, the client application can call HornClient.List() to get back a list of available ringtone filenames. To set the car horn, the client calls HornClient.Set(filename), and to play the car horn, it then calls HornClient.Play(filename). The Helper libraries were built to work on Windows 7, Windows 8, and Windows Phone 7.
OBD-II

We have already released an article and library on the OBD-II portion of the car. In short, OBD-II stands for On-Board Diagnostics. Hooking into this port allows one to query for different types of data from the car, which we use to get the current speed, RPMs, fuel level, etc. for display in the Instrument Cluster and other locations. OBD can do far more than this, but it's all we needed for our project. Please see the linked articles for further details on the OBD-II library itself.
For the car, because only one application can open and communicate with a serial port at one time, we created a WCF service that polls the OBD-II data from the car and GPS data from a Microsoft Streets & Trips GPS locator, and returns it to any application that queries the service.
For the OBD library, we used a manual connection to poll different values at different intervals. For values critical to driving the car—like RPM, speed, etc.—we polled for the values as quickly as the car could return them. With other values that weren’t critical to driving the car—like the fuel level, engine coolant temperature, etc.—we polled at a 1-2 second interval. For GPS, we subscribed to the LocationChanged event, which would fire when the GPS values changed.
Rather than creating a new serial port connection for every WCF request for OBD data, we created a singleton service that is instantiated when the service first runs. Accordingly, there is only one object in the WCF service that represents the last OBD and GPS data returned, which is obtained by the continual reading of the latest OBD data using the OBD library as described above. This means that calls to the WCF service ReadMeasurement method didn’t actually compute anything, but instead serialized the last saved data and returned it via the WCF service.
Since WCF supports multiple protocols, we implemented HTTP and TCP and ensured that any WCF service options we chose worked on Windows Phone, which, for example, can only use basic HTTP bindings.
To enable the ability to change the programming model later and to simplify the polling of the service, we built a helper library for Windows and Windows Phone that abstracts all the WCF calls.
The code below creates a new ObdService class and signs up for an event when the measurement has changed. The Start method does a couple of things: it lets you set the interval that you want to poll the ObdService, in this case every second (while the instrument cluster needs fast polling, the database logger can poll once a second). It also determines what IP address the service is hosted at (localhost), the protocol (HTTP or TCP), and whether to send “demo mode” data. Since one of the main ways the car is showcased is when it’s stopped on display, “demo mode” sends fake data, instead of always returning 0's for MPH, RPM, etc., so people can see what the instrument cluster would look like in action.

_service = new ObdService(); _service.ObdMeasurementChanged += service_ObdMeasurementChanged; _service.Start(new TimeSpan(0, 0, 0, 0, 1000), localhost, Protocol.Http, false); void service_ObdMeasurementChanged(object sender, ObdMeasurementChangedEventArgs e) { Debug.Writeline("MPH=” + e.Measurement.MilesPerHour); } OBD-II Database & Azure Services

To record and capture the car telemetry data like MPH, RPM, engine load, and throttle (accelerator) position, as well as location data (latitude, longitude, altitude, and course), we used a SQL Server Express database with a simple, flat Entity Framework model, shown below. The primary key, the ObdMeasurementID is a GUID that is returned via the ObdService. Just like above, the database logger subscribes to the ObdMeasurementChanged event and receives a new reading at the time interval set in the Start() method.

The Windows Azure data model uses Azure Table Services instead of SQL Server. The data mapping is essentially the same since both have a flat schema.
For Azure Table Storage, in addition to the schema above, you also need a partition key and a row key. For the partition key, we used a custom TripID (GUID) to represent a Trip. When the car is turned on/off a new TripID is created. That way we could group all measurements for that particular trip and do calculations based on that trip, like the average miles per gallon, distance traveled, fastest speed, etc. For the row key, we used a DateTimeOffset and a custom extension method, ToEndOfDays() that provides a unique numerical string (since Azure's row key is a string type) that subtracts the time from the DateTime.Max value. The result is that the earlier a DateTime value, the larger the number.
Example:
Time=5/11/2012 9:14:09 AM, EndOfDays=2520655479509478223 //larger
Time=5/11/2012 9:14:11 AM, EndOfDays=2520655479482804811 //smaller
Since they are ordered in reverse order, with the most recent date/time being the first row, we can write an efficient query to pull just the first row to get the current latitude/longitude without needing to scan the entire table for the last measurment.

public override string RowKey { get { return new DateTimeOffset(TimeStamp).ToEndOfDays(); } set { //do nothing } } public static class DateTimeExtensions { public static string ToEndOfDays(this DateTimeOffset source) { TimeSpan timeUntilTheEnd = DateTimeOffset.MaxValue.Subtract(source); return timeUntilTheEnd.Ticks.ToString(); } public static DateTimeOffset FromEndOfDays(this String daysToEnd) { TimeSpan timeFromTheEnd = newTimeSpan(Int64.Parse(daysToEnd)); DateTimeOffset source = DateTimeOffset.MaxValue.Date.Subtract(timeFromTheEnd); return source; } }

To upload data to Azure, we used a timer-based background uploader that would check to see if there was an internet connection, and then filter and upload all of the local SQL Express rows that had not been submitted to Azure using the Submitted boolean database field. On the Azure side, we used an ASP.NET MVC controller to submit data. The controller deserializes the data into a List type, it adds the data to a blob, and adds the blob to a queue as shown below.
A worker role (or many) will then read items off the queue and the new OBD measurement rows are placed into Azure Table Storage.

public ActionResult PostData() { try { StreamReader incomingData = new StreamReader(HttpContext.Request.InputStream); string data = incomingData.ReadToEnd(); JavaScriptSerializer oSerializer = new JavaScriptSerializer(); List measurements; measurements = oSerializer.Deserialize(data, typeof(List)) as List; if (measurements != null) { CloudBlob blob = _blob.UploadStringToIncoming(data); _queue.PushMessageToPostQueue(blob.Uri.ToString()); return new HttpStatusCodeResult(200); } ... } }

Instrument Cluster

Much of this is also covered in our previously released OBD-II library where the instrument cluster application is included as a sample. This is a WPF application that runs on a Windows 7 slate. It contains three different skins designed by 352 Media—a 2012 Mustang dashboard, a 1967 Mustang dashboard, and a Metro-style dashboard—each of which can be "swiped" through. This application queries the OBD-II WCF service described above as quickly as it can to retrieve speed, RPM, fuel level, and other data for display to the driver. The gauges are updated in real-time just as a real dashboard instrument cluster would behave.

HUD

The HUD (or Heads Up Display) application runs on one of the two Windows 7 computers in the car. This is a full-screen application that is output via a projector to a series of mirrors and a projection screen. This is then reflected onto the front glass of the windshield of the car. To install these, we altered the physical car's body and created brackets to mount mirrors and the projectors. In the picture on the left, you can see the dashboard's structural member pivoted outward. You can see the 12" section we removed and added in the base plate to allow light to be reflected through to the windshield. Bill Steele helped design and implement the physical HUD aspect into the car.

The HUD application has several different modes. The mode is selected from the Windows Phone application.

POI / Mapping – This uses Bing Maps services. The phone or Windows 8 passenger application can choose one of a select group of categories (Eat, Entertain, Shop, Gas). Once selected, the REST service layer is contacted and the current choice is persisted. The HUD is constantly polling the service to know what the current category is, and when it changes, the HUD switches to an overhead map display with the closest locations of that category displayed, along with your always updated current GPS position and direction. The list of closest items in the category is requested every few seconds from the Bing Maps API and the map is updated appropriately.
Car telemetry - In the car telemetry mode, the OBD data from the WCF service described above is queried and displayed on the screen. This can be though of as an overall car "status" display with the speed, RPMs, real-time MPG, time, and weather information.Weather – We use the World Weather Online API to get weather data for display on the HUD. This API allows queries for weather based on a latitude and longitude, which we have at all times. A quick call to the service gives us the current temperature and a general weather forecast, which we display as an icon next to the temperature in the lower-left portion of the screen.
Kinect – Using our Kinect Service, with the standard WPF client code, we can display the rear camera on the HUD to help the driver when backing up. See the Kinect Service project for more information on how this works and to use the service in an application of your own.
Windows Phone Application

One of the main ways to control the vehicle is through the Windows Phone application.

The first pivot of the app allows the user to lock, unlock, start the car, and set off the alarm. This is done through the Viper product from Directed Electronics.

The second pivot contains the remaining ways that a user can interact with the car.

Kinect – This uses the Kinect service much in the way the HUD does. It can display both the front and rear cameras as well as allow the user to listen to an audio clip and send it up to the car while applying a voice changing effect.
Voice Effect – When the Talk button is pressed, the user can record their voice via the microphone. When released, the audio data is packaged in a simple WAV file and uploaded to the REST service. The user can select from several voice effects, such as Chipmunk and Deep. On the service side, that WAV file is modified with the selected effect and then played through the PA system. The code in this section of the app is very similar to the Coding4Fun Skype Voice Changer. We use NAudio and several pre-made effects to process the WAV file for play.Lighting – This controls the external lighting for the car. The user can select a zone, an animation, and a color to apply. Once selected, this is communicated through the REST service to the lighting controller.
Messaging – This presents a list of known pictures and videos for the user. The selection is sent to the car through the REST service and displayed on the projector that is pointed at the rear window, allowing following drivers to see the image, video, or message.Point Of Interest – As described earlier, this is the way the user can turn on the Point of Interest map on the HUD. Selecting one of the four items sends the selection to the REST service where it is persisted. The polling HUD will know when the selection is changed and display the map interface as shown above.Telemetry – This is a replica of the instrument cluster that runs on the Windows 7 slate. OBD data is queried via the WCF service, just like the slate, and displayed on the gauges, just like the slate.
Projection Screen – This will raise and lower the projection screen on the rear of the car.Horn – This displays a list of known horn sound effects that live on the REST service layer. Selecting any of the items will send a command through the REST to play that sound file on the external sound system of the car. This selected audio file would play when the horn was pressed in the car.Settings – Internal settings for setting up hardware and software for the car.
Passenger Application

The passenger interface runs on a Samsung Series 7 slate running the Windows 8 Consumer Preview. This interface has a subset of the functionality provided by the Windows Phone application, but communicates through the same REST service. From this interface, the passenger can set the car horn sound effect, view the front and back Kinect cameras, select a Point of Interest category to be displayed on the HUD, and select the image, video or message that will be displayed on the rear window.

External Car Lighting

The external lighting system was controlled by a web server running on a Netduino Plus using a Sparkfun protoshield board to simplify wiring, and allow for another shield to be used. The actual lights were Digital Addressable RGB LED w/ PWM. We'll also have a more in-depth article on this system on Coding4Fun shortly.
The car is broken down into different zones—grill, wheels, vents, etc. It also has a bunch of pre-defined procedural animation patterns that have a few adjustable parameters that allow for things like a snake effect, a sensor sweep, or even a police pattern. Each zone has its own thread which provides the ability to have multiple animation patterns going at the same time. When a command is received, the color, pattern, zone, and other data is then processed.
Here is a basic animation loop pattern.

private static void RandomAnimationWorker() { var leds = GetLedsToIlluminate(); var dataCopy = _data; var r = new Random(); while (IsThreadSignaledToBeAlive(dataCopy.LightingZone)) { for (var i = 0; i < leds.Length; i++) SetLed(leds[i], r.Next(255), r.Next(255), r.Next(255)); LedRefresh(); Thread.Sleep(dataCopy.TickDuration); } } Rear Projection Window

The rear projection system consists of two 4” linear actuators, a linear actual controller, the NETMF web server from above, a Seeed Studio Relay Shield, the back glass of a 1967 Ford Mustang, some rear projection film, a low profile yet insanely bright projector that accepts serial port commands, and a standard USB to serial adapter.
The REST service layer toggles the input of the projector based on the selected state. This would allow us to go from the HDMI output of an Xbox 360 to the VGA output of the laptop. While doing this, the REST layer sends a command to the NETMF web server to either raise or lower the actuators.
Here is the code for the NETMF to control the raising and lowering the glass:

public static class Relay { // code for for Electronic Brick Relay Shield static readonly OutputPort RaisePort = new OutputPort(Pins.GPIO_PIN_D5, false); static readonly OutputPort LowerPort = new OutputPort(Pins.GPIO_PIN_D4, false); const int OpenCloseDelay = 1000; public static bool Raise() { return ExecuteRelay(RaisePort); } public static bool Lower() { return ExecuteRelay(LowerPort); } private static bool ExecuteRelay(OutputPort port) { port.Write(true); Thread.Sleep(OpenCloseDelay); port.Write(false); return true; } } Messaging System

This is a WPF application that leveraged the file system on the computer to communicate between the REST service layer and itself. Visually, it shows the message/image/video in the rear view mirror but it actually does two other tasks, it operates our car horn system and plays the recorded audio output from the phone.

Displaying Messages
To display images, we poll the REST service every second for an update. Depending on the return type, we either display a TextBlock element or a MediaElement.Detecting and Playing Car Horn
When someone presses the horn in the car, it is detected by a Phidget 8/8/8 wired into a Digital Input. In-between the car horn and the Phidget, there is a relay as well. This isolates the voltage coming from the horn and solves a grounding issue. We then feed back two wires from that relay and put one into the ground and the other into one of the digital inputs. In the application, we listen to the InputChange event on the Phidget and play / stop the audio based on the state.Detecting new recorded audio from the phone and car horn changes
When someone talks into the phone or selects a new car horn, the REST service layer places that audio file into a predetermined directory. The Messaging service then uses a FileSystemWatcher to detect when this file is added. The difference between the car horn detection and recorded audio is the recorded audio will play once it is done writing to the file system.
External PA System

To interact with people, we installed an external audio PA or Public Address system. This system is hooked into the laptop that is connected to the car horn, and can play audio data from the phone. Having a PA system that is as simple as an audio jack that plugs into a PC enabled us to have different ringtones for the car horn and to talk through the car using Windows Phone.
Conclusion

After months of planning and building, the Project Detroit car was shown to the world on an episode of Inside West Coast Customs. Though it was a ton of work, the end product is something we are all proud of. We hope that this project inspires other developers to think outside the box and realize what can be done with some off-the-shelf hardware, software, and passion.

More...




hi there, I'll describe my initial problem first:

Packard bell PC imedia something, radeon sapphire 5670 HD GPU upgrade, recent (Jan 2012) windows 7 64 bit custom install upgrade from vista 32 bit, during which i backed up all files on a Samsung external hard drive, then did a complete hard drive wipe install of windows 7, then put it all back on using software run by the Samsung drive. Went perfectly as planned.
Other than that the PC was stock.

One day playing Cod 8, screen inputs failed, then keyboard failed, then funny smell from PC tower, so I switched it off. After analysis, showed to be PSU fail. I took the opportunity to build a better PC, as this one is quite a few years old now.
So I only used the hard drive (WD6400AAKS), Blu ray reader disk drive, memory card reader drive, and Radeon GPU from the old PC, everything else is new:

ASUS P8Z68-V LX mobo
Overclocked intel i5 processor with artic cooling freezer 13 CPU fan
Corsair TX650 PSU
Antec DF-30 case with 4 led fans
All cables and such are new, and all plugged in correctly

When turned on the first time, all fans on, leds, and everything started as it should have, but NO BEEP, monitor came on, instead of showing initial boot screen, asus version came up, then tried to boots windows, then just as the circles begging to circle the logo, it crashes, screen turns off, then on again, then back to asus screen, the windows screen crashes like before, then asks me to do startup repair or start as normally - NO OTHER OPTIONS. Every time I do this, it says it couldn't solve the problem, and restarts, then crashes, then restarts, then goes to startup repair option again. If i select start as normally, it just crashes again like before then loops back to startup repair option again.

I have tried all options possible after the startup repair fails, including command prompt stuff, system restores, image restores, hardware diagnostics, basically everything. It either fails, then goes back to the startup repair loop, or tells me there are no problems with the hardware, then goes back to the startup repair loop.

I AM AT A LOSS FOR WHAT TO DO. I can't find anything on the web to help, hoping some geniuses on here can fix my problem. I think my hard drive is corrupt, but signs have led me to believe its not completely corrupt - like it will see all the places and times on my hard drive to use when i select system restore, however after a fair time of trying each time, and with multiple possible restore points, it fails every time. I think all the other hardware is fine, and working as it should. I think some of the windows system files were damaged when the old PC's PSU blew while playing COD (it usually handles COD fine).

All and any comments appreciated, ask away and I will let you know if i have tried it yet.
Sorry for the long read! Cheers in advance guys!




Hi,
First of all I would like to thank everyone who helps out on these forums.

I have a new build (mid December 2011) with a new install (also mid December 2011) of Windows 7 Business 64-bit.

Recently (in the last 4-5 days) I began having BSOD problems at seemingly random times. I would have several BSODs in a row then not have one again for several hours. Most of the errors are IRQ_LESS_OR_EQUAL but I have also gotten a SYSTEM_SERVICE_EXCEPTION and a PFN_LIST_CORRUPT BSOD. I have been looking for answers for several days. I updated BIOS, and Mobo divers. Video divers were already up to date.

I recently upgraded from firefox 9 to firefox 10 and also loaded Quickbooks 2008 into the XP mode Windows Virtual machine. Also did a Windows Update. Other then that no hardware or software changes.

So far I have tried: Updating the BIOS, Mobo drivers, rolling back to a previous date. I have not have a BSoD incident in safe mode but I have had a couple of BSoDs when I was just in the process of booting safe mode.

Seven Forums.zip

I am attaching my system files per the instructions in BSOD posting instructions.

Thank you to anyone who can help! I greatly appreciate all who put their time and effort into these forums and into the diagnostic tools also.
Thank you again for your help.

JS




So the past couple of days I've been hit hard with Hal.dll 0x124 stop errors.
It's happened 3x while using google chrome and twice while running battlefield bad company 2.

No hardware changes in the past month. No added hardware either.
Recently build a completely new machine because of BSOD errors 2 months ago with my faulty motherboard causing the issue. Absolutely everything is brand new except the video card.
EDIT: complete SF diagnostic tool upload is in my next post.

Attached Files dmp.zip (78.0 KB, 78 views) Last edited by xxceL; 05-26-2011 at 04:55 AM. Reason: Spell check Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-26-2011 #2 xxceL Junior Member  Thread Starter Enjoys Windows 7 Forums  
Join Date Oct 2009 Posts 4 Re: hal.dll and ntsokrnl.exe I now added everything from the SF Diagnostic Tool if needed.

EDIT:
I noticed some fixes to the error being remove Easy Tuner but I don't have it installed.
I've also changed my ram from 1600mhz to 1333mhz in the bios but no changes. Also changed my 4.8ghz to 3.4ghz and still the same error.
I hear this error can occur from under/over voltage however I have no experience with voltages, they are all automatically set. Attached Files Seven Forums.zip (408.8 KB, 92 views) Last edited by xxceL; 05-26-2011 at 04:53 AM. Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-26-2011 #3 xxceL Junior Member  Thread Starter Enjoys Windows 7 Forums  
Join Date Oct 2009 Posts 4 Re: hal.dll and ntsokrnl.exe I read up on this for hours and I upped my voltage on my RAM. Seeing as the bluescreen viewer kept failing at a certain referenced point I thought it could be faulty ram.
BC2 would crash well under 3 minutes into the game. I've just played it for 2 hours straight with no hitch.
Google chrome is no longer crashing so far either
I'll post back if there is any further issue..

To note:
I'm using Ripjaw ram with a 2600K cpu.
Went from AUTO voltage (which was ~1.5) and upped it to 1.575 and it seems to be perfectly stable. Don't know why this issue occured in the first place as it ran perfectly fine for a couple of months after i put it all together. Just for reference to anyone else who has issues with hal.dll and ends up googling it :P




Computer purchased as a custom build from IBuyPower.com in July 2010, has worked perfectly until just recently... I can't remember the exact event/date when the BSoD first started happening, originally attributed to Google Chrome, as starting the browser w/ several tabs open from a previous session led to the initial crashes. Switching browsers helped somewhat, but problem moved from that activity to a startup issue... over the past week or so, the comp has blue-screened before becoming 'useable' upon startup. A couple 'dings' that sounded like hardware connecting (or being removed) and then BSoD (IRQL_NOT_LESS_OR_EQUAL)... prior to yesterday, it would finish starting up and be usable about one out of four times and I've been able to play games, surf the web, etc... since last night, it has not started up w/o BSoD within the first couple minutes. After attempting some fixes, running Malwarebites (2 svchost infections) and AVG's Virus Scanner & PC TuneUp, it's actually gotten worse, just resetting and not even giving the BSoD.

It's seems to be completely stable in Safe Mode, no blue screens so far. I had trouble connecting to the Internet on a couple reboots, but rolling back the driver on the network adapter seems to have solved that issue. What else... I've updated the bios to the version listed in my profile, if you need more details than that, let me know what's important and I'll figure it out. I tried to do a Windows Restore Point, but it didn't succeed.

I've done the SF Diagnostic as instructed. I attempted the CPU-Z software, but got an error 0x43C (1086) that I assume caused the later tabs not to populate. I screen-grabbed the ones that did. RAMMon also returned an error > SPDINFO_INIT_DIRECTIO and would not start. However, the built-in Windows memory checker did not find any defects.

Let me know what I need to do next and thanks in advance for your help! -STX Attached Files help.zip (475.7 KB, 49 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7
Computer Type Custom Build from IBuyPower.com
OS Service Pack SP1
Internet Explorer Version IE9
DirectX Version 11
CPU Type and Speed AMD Phenom II X2 550 (addl. cores unlocked)
CPU Cooling Liquid Cooling w/ 120mm radiator
Motherboard Chipset ASUS M4A785 - AMD785G Hybrid CrossFire
System BIOS Revision BIOS 1006
System Memory Type 8GB (4x2GB) DDR2-800 PC6400
Video Card Type and Speed EVGA 01G-P3-1452-TR GeForce GTS 450 (Fermi) Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16
Power Supply Unit (PSU) 600w
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-14-2012 #2 Trouble Administrator Noob Whisperer  
Join Date Nov 2009 Posts 5,926 Blog Entries2 Re: HELP! Almost 2yr old PC w/ recent & increasing onset of BSoD Hello and welcome to the forum.
Looking at your three dump files included in your attachments, which all occurred on the same day within minutes of each other. I don't see anything that is pointing to a particular issue.
So if you don't mind could we start with a relatively easy thing first?
Uninstall AVG completely. Use the programs uninstaller if available or the control panel programs and features applet and then follow that up with the vendor specific proprietary removal tool from here AVG Download tools and utilities (get the correct version for your architecture).
Replace it for now with Microsoft Security Essentials from here Microsoft Security Essentials - Free Antivirus for Windows.
After that if Blue Screens persist attach the new ones to your next post. If they are not anymore informative than the present three we may have to discuss adding Driver Verifier to the mix.
Regards
Randy




I was getting BSOD and freezeups/slow downs on my Vista machine and did the easiest (but most expensive fix) - I upgraded by doing a new build.

Windows 7 x64
Intel i5-750 Lynnfield on a Gigabyte P55A-UD4P mobo
8 GB (4x2GB) Corsair DDR3 1600
OCZ Vertex 120GB SSD for the system drive
2 - 1TB WD Green (1 EAD and 1 EAR - my bad on the EAR, as I had to do a 7-8 jumper to get it aligned)
Asus ATI EAH5780 1 GB videocard
Corsair 750W PSU

Software Loaded:
NIS 2010 (Norton - I know, most people think it's crap)
Various software: Quickbooks, Adobe PS CS4, Foxit, WinRAR, TeraCopy, VLC player, etc.

I ran Windows Update and updated all the drivers I could (curiously, the Gigabyte Motherboard DVD would not run under W7...) including chipset, Realtek, IDE, USB, etc. I DID NOT flash the BIOS - I figured it was the latest since it was so new).

I followed some "tweak" recommendations for the SSD and Windows 7:
Disabled defrag, superfetch and prefetch, drive indexing on the SSD (some of these W7 does auto)
Reduced the Page File size, moved some folders off the SSD (like "My Music", etc.)

I also tried to set up the drives as AHCI instead of IDE even though I won't do a RAID (I have a Windows Home Server for backup and storage); however, I didn't do it initially, and I made a regedit change and then changed the BIOS to the AHCI. I couldn't get that to ever boot so I changed back to IDE.

The BSODs started randomly, maybe after the AHCI but maybe before. Various problems:
PFN_LIST_CORRUPT
PAGE_FAULT_IN_NON_PAGED_AREA
REFERENCE_BY_POINTER
SESSION3_INITIALIZATION_FAILED

I am running the Windows Memory Diagnostic Tool now (it takes forever - actually I think IT HAS FROZEN too!) and I have the memtest86++ disk to test afterwards. If that is OK, I read to go into the System logs in Event Viewer and use chkdsk /f/v.

Is there something else to do? I'm not sure how to look at a minidump (that's what I feel like doing to my PC right now).

Thanks in advance for your help. I really don't want to do a re-install unless I know it's not a hardware issue!




Hi there,
just joined the forum. Have been having lots of BSODs and other issues since I rebuilt the system. Here is the history.
1. System specs are Core I5 2500K processor, Gigabyte Z68X UD3H MOBO, Corsair 8GN RAM, Integrated video and sound, Seagate mechanical HDD, Win 7- it was running off the vertex OCX SSD - 64GB. That guy didnt do the intel RST properly as he loaded Win 7 directly onto SSD. System was giving unusual app errors so I decided to rebuild the OS 2 weeks ago - formatted HDD and loaded Win 7 SP1. I have not yet turned on the Intel RST although I have seen it works fine.

2. So Initially system was built Feb 2012 on Win 7 Ultimate - worked fine since then, but To refresh history, about 2-3 weeks ago when I decided to rebuild this machine - it was due to SFC failing to repair files. At that time windows was giving some application errors every now and then (but nowhere close to the frequency its doing now- and specialy BSOds, which I got only 2-3 times in 4 months in the previos build).

3. Now since last 2 weeks, have been thru a string of BSODs, more in last 3-4 days. I've attached all the required format details here so hopefully you gurus can help me soon. After we troubleshoot this BSOds, I really want to take a good backup of the system and then turn on Intel RST - so I can fasten the system.

4. I've also been running the Windows "Verifier" to put drivers in stress, since last 2 days. One thing found unusual now- system has been giving me BSOD sometimes on startup as well - for instance 8/25, both in morning and afternoon - when I started my PC it gave me BSODs.

5. It really cant be hardware as the machine was functioning fine for last4-5 months. Its just that rebuilt the OS and all apps- all hardware remains the same.
Also I wanted to let you know that just now again and in last 1-2 days, while starting up the machine is giving problems- like just now, when I started it, it went into start-up repair mode and then after 2 restarts (first it got me to gigabyte temporary profile) it logged into mine. I'm not sure if verifier logs any of these details or just the BSODs.

6. Now, I have stopped or put to manual some windows services, based on another recommendation to make Win 7 system fast. Attached is the detailed list of whats manual vs auto now.

7. Latest- this morning (8/26) I installed AV (Vipre antivirus) and have been sgetting FRESH STRING OF BSODs AFTER AV Install. and some other errors in a matter of an hour. SO much so that I really cant login to normal windows and am posting this from safe mode. Attached is the dump from SF diag tool.I think this confirms that its a driver issue. Some other datapoints
1. It gave me some other errors that I pasted in onenote and am posting along.
2. WHen booting in regular Win mode, it said once Error - C:/Windows/WinSXS is corrupt or unreadable. Pls. run chkdsk utility. Then on next boot it ran that but again couldnt log onto windows normally. hence I did the safe mode and took a fresh SF diag tool dump.
Pls. respond soon with what else I can run to help you guys help me fast.
thanks a ton.

8. Here is the CBS.log file as I just run SFC - it says that it found some corrupt files that it could not repair.

9. Win Safe mode works fine.

Pls. HELP!! Do respond soon on what other diagnostics- like startup or shutdown you'd like me to run. Attached Files Seven Forums #3 Safe Mode.zip (1.37 MB, 54 views) services.zip (380.3 KB, 52 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 08-26-2012 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,325 Re: HELP needed with RANDOM BSODs - attchd are all all details Headed out to dinner, but wanted to suggest this first:

Turn off Driver Verifier. To do this, open up verifier and select "Delete existing settings" then click on "Finish"
Reboot to make the changes take affect.

Update fax/modem drivers (yours date from 2006/2007)
Update webcam drivers (yours date from 2008)

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems. This device is listed as having problems:
Security Processor Loader Driver ROOTLEGACY_SPLDR000 This device is not present, is not working properly, or does not have all its drivers installed. Most commonly this happens when you have a virus infection, or have had a virus infection that hasn't been completely repaired. Please run several of the free anti-malware scans at this link: Free Online AntiMalware Resources

If that doesn't stop things, then try these free hardware diagnostics: Hardware Diagnostics

Analysis:The following is for information purposes only. Code: **************************Sun Aug 26 12:28:14.508 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82612-17425-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:25.913 BugCheck Code: BugCheck D1, {fffffa8014da34fc, 2, 0, fffff88001f8922a} Probably caused by :rdyboost.sys ( rdyboost!B_TREE::BTreeSearchKey+c6 ) BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP BUGCHECK_STR: 0xD1 PROCESS_NAME: FUFAXSTM.exe FAILURE_BUCKET_ID: X64_0xD1_VRF_rdyboost!B_TREE__SMD_STORE_KEY,SMKM_STORE_MGR_SMD_TRAITS_::SMKM_FRONTEND_ENTRY,4096,B_TREE_DUMMY_NODE_POOL_::BTreeSearchKey+c6 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sun Aug 26 12:25:00.708 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82612-16801-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:27.112 BugCheck Code: BugCheck 19, {3, fffffa80066b0500, fffffa80066bcd00, fffffa80066bf300} Probably caused by :Pool_Corruption ( nt!ExDeferredFreePool+a53 ) BugCheck Info: BAD_POOL_HEADER (19) BUGCHECK_STR: 0x19_3 DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP PROCESS_NAME: svchost.exe FAILURE_BUCKET_ID: X64_0x19_3_VRF_nt!ExDeferredFreePool+a53 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sun Aug 26 12:03:05.205 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82612-17097-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:36.220 BugCheck Code: BugCheck 1A, {31, fffffa8012b432a0, fffff8800d696000, fffff8a001a5c003} Probably caused by :ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+7271 ) BugCheck Info: MEMORY_MANAGEMENT (1a) BUGCHECK_STR: 0x1a_31 DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP PROCESS_NAME: BingDesktop.ex FAILURE_BUCKET_ID: X64_0x1a_31_VRF_nt!_??_::NNGAKEGL::_string_+7271 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sun Aug 26 12:01:47.441 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82612-16333-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:18.472 BugCheck Code: BugCheck 3B, {c0000005, fffff960000a6855, fffff88002dceb70, 0} Probably caused by :win32k.sys ( win32k!FHOBJ::pbktSearch+91 ) BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b) DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP BUGCHECK_STR: 0x3B PROCESS_NAME: winlogon.exe FAILURE_BUCKET_ID: X64_0x3B_VRF_win32k!FHOBJ::pbktSearch+91 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Aug 25 17:19:49.131 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82612-16582-01.dmp] Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82512-19484-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:17.146 BugCheck Code: BugCheck 24, {1904fb, fffff880029631e8, fffff88002962a40, fffff80002ec4e50} Probably caused by :ntkrnlmp.exe ( nt!CcAcquireByteRangeForWrite+280 ) BugCheck Info: NTFS_FILE_SYSTEM (24) DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP PROCESS_NAME: svchost.exe BUGCHECK_STR: 0x24 FAILURE_BUCKET_ID: X64_0x24_VRF_nt!CcAcquireByteRangeForWrite+280 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Aug 25 09:44:23.221 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82512-16863-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:18.626 BugCheck Code: BugCheck 3B, {c0000005, fffff96000096855, fffff88002d64b70, 0} Probably caused by :win32k.sys ( win32k!FHOBJ::pbktSearch+91 ) BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b) DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP BUGCHECK_STR: 0x3B PROCESS_NAME: winlogon.exe FAILURE_BUCKET_ID: X64_0x3B_VRF_win32k!FHOBJ::pbktSearch+91 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Aug 24 10:09:44.906 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82412-21777-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 2:20:56.311 BugCheck Code: BugCheck 1A, {41287, e20, 0, 0} *** WARNING: Unable to verify timestamp for win32k.sys *** ERROR: Module load completed but symbols could not be loaded for win32k.sys Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+45a45 ) BugCheck Info: MEMORY_MANAGEMENT (1a) BUGCHECK_STR: 0x1a_41287 DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP PROCESS_NAME: System FAILURE_BUCKET_ID: X64_0x1a_41287_VRF_nt!_??_::FNODOBFM::_string_+45a45 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Thu Aug 23 15:56:14.909 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82312-16177-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:02:44.314 BugCheck Code: BugCheck 50, {fffff902bd5692c8, 0, fffff960000ecf56, 5} Probably caused by :win32k.sys ( win32k!RFONTOBJ::bGetGlyphMetricsPlus+166 ) BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT BUGCHECK_STR: 0x50 PROCESS_NAME: explorer.exe FAILURE_BUCKET_ID: X64_0x50_win32k!RFONTOBJ::bGetGlyphMetricsPlus+166 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Thu Aug 23 08:38:11.543 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82312-14258-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:07:07.558 BugCheck Code: BugCheck 19, {3, fffffa800668d920, fffffa800668cd20, fffffa800668d920} Probably caused by :Pool_Corruption ( nt!ExDeferredFreePool+a53 ) BugCheck Info: BAD_POOL_HEADER (19) BUGCHECK_STR: 0x19_3 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: mbamservice.ex FAILURE_BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+a53 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Wed Aug 22 14:56:26.000 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82212-17050-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:33:49.015 BugCheck Code: BugCheck 19, {3, fffff900c23b4b80, fffff900c23b4b80, fffff900c23b7780} Probably caused by :Pool_Corruption ( nt!ExDeferredFreePool+c96 ) BugCheck Info: BAD_POOL_HEADER (19) BUGCHECK_STR: 0x19_3 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: chrome.exe FAILURE_BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+c96 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Wed Aug 22 13:18:14.999 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82212-16972-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 1:54:20.403 BugCheck Code: BugCheck 1A, {411, fffff68000304580, 9d00, fffff68000000003} Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+6061 ) BugCheck Info: MEMORY_MANAGEMENT (1a) BUGCHECK_STR: 0x1a_411 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: chrome.exe FAILURE_BUCKET_ID: X64_0x1a_411_nt!_??_::FNODOBFM::_string_+6061 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Wed Aug 22 11:22:45.856 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82212-19032-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:22.261 BugCheck Code: BugCheck 27, {baad0073, fffff88003c9e138, fffff88003c9d990, fffff88001023d63} Probably caused by :msrpc.sys ( msrpc!RpcAsyncInitializeHandle+c09 ) BugCheck Info: RDR_FILE_SYSTEM (27) DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: winlogon.exe BUGCHECK_STR: 0x27 FAILURE_BUCKET_ID: X64_0x27_msrpc!RpcAsyncInitializeHandle+c09 CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz" MaxSpeed: 3300 CurrentSpeed:3309 BIOS Version F12 BIOS Release Date 03/20/2012 Manufacturer Gigabyte Technology Co., Ltd. Product Name Z68X-UD3H-B3 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``

3rd Party Drivers:The following is for information purposes only. Any drivers in red should be updated. Code: **************************Sun Aug 26 12:28:14.508 2012 (UTC - 4:00)************************** mdmxsdk.sys Mon Jun 19 17:27:26 2006 (449716BE) OEM05Vfx.sys Mon Mar 5 05:55:47 2007 (45EBF733) OEM05Afx.sys Fri Jun 8 04:00:36 2007 (46690CA4) CAX_CNXT.sys Wed Jun 20 15:29:12 2007 (46798008) CAXHWBS2.sys Wed Jun 20 15:30:20 2007 (4679804C) CAX_DPV.sys Wed Jun 20 15:32:53 2007 (467980E5) xaudio64.sys Fri Jun 29 20:11:22 2007 (46859FAA) OEM05Vid.sys Fri Jul 20 02:37:49 2007 (46A0583D) AVer88xHD64.sys Thu Jun 25 06:09:54 2009 (4A434CF2) intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD) amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA) SBREdrv.sys Mon Mar 22 10:54:10 2010 (4BA78492) SCDEmu.SYS Mon Apr 12 04:52:25 2010 (4BC2DF49) iaStorV.sys Thu Jun 10 20:46:19 2010 (4C11875B) sbapifs.sys Mon Jun 14 12:20:34 2010 (4C1656D2) sbtis.sys Mon Jul 26 20:30:54 2010 (4C4E28BE) HECIx64.sys Tue Oct 19 19:33:43 2010 (4CBE2AD7) Rt64win7.sys Tue Sep 27 10:50:33 2011 (4E81E2B9) IntcDAud.sys Tue Dec 6 06:23:07 2011 (4EDDFB1B) igdkmd64.sys Thu Jan 5 22:36:45 2012 (4F066C4D) EtronXHCI.sys Fri Feb 3 06:23:49 2012 (4F2BC3C5) EtronHub3.sys Fri Feb 3 06:23:55 2012 (4F2BC3CB) RTKVHD64.sys Tue May 22 06:19:20 2012 (4FBB6828) iaStor.sys Wed May 30 16:40:40 2012 (4FC685C8) จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Aug 25 17:19:49.131 2012 (UTC - 4:00)************************** SBREdrv.sys Fri Apr 29 11:51:13 2011 (4DBADE71) จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Aug 24 10:09:44.906 2012 (UTC - 4:00)************************** mbam.sys Wed Nov 2 09:07:48 2011 (4EB140A4) จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Thu Aug 23 15:56:14.909 2012 (UTC - 4:00)************************** VSTCNXT6.SYS Wed Oct 15 20:52:22 2008 (48F69046) VSTBS26.SYS Wed Oct 15 20:54:06 2008 (48F690AE) VSTDPV6.SYS Wed Oct 15 20:57:45 2008 (48F69189) http://www.carrona.org/drivers/driver.php?id=mdmxsdk.sys
OEM05Vfx.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed. This is a webcam driver.
OEM05Afx.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed. This is a webcam driver.
http://www.carrona.org/drivers/driver.php?id=CAX_CNXT.sys
http://www.carrona.org/drivers/driver.php?id=CAXHWBS2.sys
http://www.carrona.org/drivers/driver.php?id=CAX_DPV.sys
http://www.carrona.org/drivers/driver.php?id=xaudio64.sys
OEM05Vid.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed. This is a webcam driver.
http://www.carrona.org/drivers/driver.php?id=AVer88xHD64.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=SBREdrv.sys
http://www.carrona.org/drivers/driver.php?id=SCDEmu.SYS
http://www.carrona.org/drivers/driver.php?id=iaStorV.sys
http://www.carrona.org/drivers/driver.php?id=sbapifs.sys
http://www.carrona.org/drivers/driver.php?id=sbtis.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys
http://www.carrona.org/drivers/driver.php?id=EtronXHCI.sys
http://www.carrona.org/drivers/driver.php?id=EtronHub3.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=SBREdrv.sys
http://www.carrona.org/drivers/driver.php?id=mbam.sys
http://www.carrona.org/drivers/driver.php?id=VSTCNXT6.SYS
http://www.carrona.org/drivers/driver.php?id=VSTBS26.SYS
http://www.carrona.org/drivers/driver.php?id=VSTDPV6.SYS




hi can any one help me here iv build this pc and now im starting to get this it worked fine for about week. Attached Files 082412-5865-01.dmp (270.6 KB, 79 views) 082412-6021-01.dmp (270.6 KB, 62 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 08-26-2012 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,325 Re: pc has just started BSOD two times today. Please provide this info to give us a deeper understanding of your errors: How to ask for help with a BSOD problem

It's a distinct possibility that this might be a hardware problem. Please start with these free, bootable diagnostics: Initial Hardware Diagnostics As there is some video involvement, please also run the free diagnostics from here: Additional Hardware Diagnostics

Please remove the current overclock on your system (it's at 100 mHz - not much, but it is significant). Feel free to resume the overclock once the system is stablized.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

hamachi.sys Thu Feb 19 05:36:41 2009 (499D3639)
LogMeIn Hamachi Virtual network interface driver
http://www.carrona.org/drivers/driver.php?id=hamachi.sys

RtNdPt60.sys Sun Jul 19 22:27:32 2009 (4A63D614)
Realtek NDIS User mode I/O Driver (networking)
http://www.carrona.org/drivers/driver.php?id=RtNdPt60.sys

Analysis:The following is for information purposes only. Code: **************************Fri Aug 24 10:27:56.891 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82412-6021-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:17:54.484 BugCheck Code: BugCheck 1E, {0, 0, 0, 0} *** WARNING: Unable to verify timestamp for win32k.sys *** ERROR: Module load completed but symbols could not be loaded for win32k.sys Probably caused by :hardware ( nt!KiKernelCalloutExceptionHandler+e ) BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e) DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT BUGCHECK_STR: 0x1E PROCESS_NAME: System FAILURE_BUCKET_ID: X64_IP_MISALIGNED CPUID: "Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed:3502 BIOS Version 0610 BIOS Release Date 05/08/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Aug 24 10:02:16.009 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__82412-5865-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 1:08:40.602 BugCheck Code: BugCheck 50, {ffffffffffffffe8, 0, fffff88004739d7e, 0} *** WARNING: Unable to verify timestamp for win32k.sys *** ERROR: Module load completed but symbols could not be loaded for win32k.sys Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::IsPagingOperationPending+52 ) BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT BUGCHECK_STR: 0x50 PROCESS_NAME: System FAILURE_BUCKET_ID: X64_0x50_dxgmms1!VIDMM_GLOBAL::IsPagingOperationPending+52 CPUID: "Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed:3502 BIOS Version 0610 BIOS Release Date 05/08/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``

3rd Party Drivers:The following is for information purposes only. Any drivers in red should be updated. Code: **************************Fri Aug 24 10:27:56.891 2012 (UTC - 4:00)************************** hamachi.sys Thu Feb 19 05:36:41 2009 (499D3639) intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD) RtNdPt60.sys Sun Jul 19 22:27:32 2009 (4A63D614) amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA) AsUpIO.sys Mon Aug 2 22:47:59 2010 (4C57835F) ICCWDT.sys Wed Aug 18 04:27:45 2010 (4C6B9981) AsIO.sys Mon Aug 23 21:53:02 2010 (4C7325FE) ALSysIO64.sys Sat Jul 9 20:27:45 2011 (4E18F201) ndisrd.sys Fri Aug 12 06:14:50 2011 (4E44FD1A) ASUSFILTER.sys Tue Sep 20 11:46:33 2011 (4E78B559) Rt64win7.sys Tue Sep 27 10:50:33 2011 (4E81E2B9) HECIx64.sys Wed Nov 9 19:52:25 2011 (4EBB2049) iaStor.sys Tue Nov 29 22:39:19 2011 (4ED5A567) RTKVHD64.sys Tue Dec 13 05:24:54 2011 (4EE727F6) iusb3hub.sys Thu Jan 5 06:54:43 2012 (4F058F83) iusb3xhc.sys Thu Jan 5 06:54:45 2012 (4F058F85) iusb3hcs.sys Thu Jan 5 06:56:40 2012 (4F058FF8) MpFilter.sys Fri Mar 9 06:05:26 2012 (4F59E3F6) AtihdW76.sys Fri May 11 04:25:40 2012 (4FACCD04) atikmpag.sys Fri Jul 27 21:14:47 2012 (50133D07) atikmdag.sys Fri Jul 27 21:48:09 2012 (501344D9) http://www.carrona.org/drivers/driver.php?id=hamachi.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=RtNdPt60.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys
http://www.carrona.org/drivers/driver.php?id=ICCWDT.sys
http://www.carrona.org/drivers/driver.php?id=AsIO.sys
http://www.carrona.org/drivers/driver.php?id=ALSysIO64.sys
http://www.carrona.org/drivers/driver.php?id=ndisrd.sys
http://www.carrona.org/drivers/driver.php?id=ASUSFILTER.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=iusb3hub.sys
http://www.carrona.org/drivers/driver.php?id=iusb3xhc.sys
http://www.carrona.org/drivers/driver.php?id=iusb3hcs.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=AtihdW76.sys
http://www.carrona.org/drivers/driver.php?id=atikmpag.sys
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys




I have Windows 7 Ultimate 64bit
I have this BSOD every 3-5 mins when playing Assassin's Creed Brotherhood, and some other games too

I tried updating ATI drivers but that didn't help

RAMMon :

Code: RAMMon v1.0 Build: 1002 built with SysInfo v1.0 Build: 1006 PassMark (R) Software - www.passmark.com Memory Summary For DANIELKERB Number of Memory Devices: 3 Total Physical Memory: 4094 MB (4096 MB) Total Available Physical Memory: 2456 MB Memory Load: 40% ItemSlot #1Slot #2Slot #3Slot #4 Ram Type DDR2 DDR2 DDR2 Not Populated Standard Name DDR2-800 DDR2-800 DDR2-800 Module Name PC2-6400 PC2-6400 PC2-6400 Memory Capacity (MB) 1024 1024 2048 Bus Clockspeed (Mhz) 400.00 400.00 400.00 Jedec Manufacture Name Kingston Kingston Kingston Search Amazon.com Search! Search! Search! SPD Revision 1.2 1.2 1.2 Registered No No No ECC No No No DIMM Slot # 1 2 3 Manufactured Week 15 of Year 2008 Week 15 of Year 2008 Week 25 of Year 2009 Module Part # 99U5316-028.A00LF 99U5316-028.A00LF 99U5429-007.A00LF Module Revision 0x0 0x0 0x0 Module Serial # 0x6827E14A 0x6727DE4A 0x3FCCF582 Module Manufacturing Location 5 5 5 # of Row Addressing Bits 14 14 14 # of Column Addressing Bits 10 10 10 # of Banks 4 4 8 # of Ranks 2 2 2 Device Width in Bits 8 8 8 Bus Width in Bits 64 64 64 Module Voltage SSTL 1.8V SSTL 1.8V SSTL 1.8V CAS Latencies Supported 4 5 6 4 5 6 4 5 6 Timings @ Max Frequency 6-6-6-18 6-6-6-18 6-6-6-18 Minimum Clock Cycle Time, tCK (ns) 2.500 2.500 2.500 Minimum CAS Latency Time, tAA (ns) 15.000 15.000 15.000 Minimum RAS to CAS Delay, tRCD (ns) 15.000 15.000 15.000 Minimum Row Precharge Time, tRP (ns) 15.000 15.000 15.000 Minimum Active to Precharge Time, tRAS (ns) 45.000 45.000 45.000 Minimum Row Active to Row Active Delay, tRRD (ns) 7.500 7.500 7.500 Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) 60.000 60.000 60.000 Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) 105.000 105.000 127.500 DDR2 Specific SPD Attributes Data Access Time from Clock, tAC (ns) 0.400 0.400 0.400 Clock Cycle Time at Medium CAS Latency (ns) 3.000 3.000 3.000 Data Access Time at Medium CAS Latency (ns) 0.450 0.450 0.450 Clock Cycle Time at Short CAS Latency (ns) 3.750 3.750 3.750 Data Access Time at Short CAS Latency (ns) 0.500 0.500 0.500 Maximum Clock Cycle Time (ns) 8.000 8.000 8.000 Write Recover Time, tWR (ns) 15.000 15.000 15.000 Internal Write to Read Command Delay, tWTR (ns) 7.500 7.500 7.500 Internal Read to Precharge Command Delay, tRTP (ns) 7.500 7.500 7.500 Address/Command Setup Time Before Clock, tIS (ns) 0.170 0.170 0.170 Address/Command Hold Time After Clock, tIH (ns) 0.250 0.250 0.250 Data Input Setup Time Before Strobe, tDS (ns) 0.050 0.050 0.050 Data Input Hold Time After Strobe, tDH (ns) 0.120 0.120 0.120 Maximum Skew Between DQS and DQ Signals (ns) 0.200 0.200 0.200 Maximum Read Data hold Skew Factor (ns) 0.240 0.240 0.240 PLL Relock Time (ns) 0.000 0.000 0.000 DRAM Package Type Planar Planar Planar Burst Lengths Supported 4 8 4 8 4 8 Refresh Rate Reduced (7.8us) Reduced (7.8us) Reduced (7.8us) # of PLLS on DIMM 0 0 0 FET Switch External Enable No No No Analysis Probe Installed No No No Weak Driver Supported Yes Yes Yes 50 Ohm ODT Supported Yes Yes Yes Partial Array Self Refresh Supported No No No Module Type UDIMM UDIMM UDIMM Module Height (mm) 30.0 30.0 30.0 I included a snip of the heat,and CPU Z SPD and Memory, and SF Diagnostic Tool info Attached Thumbnails   Attached Files Seven Forums.zip (1.20 MB, 66 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 03-18-2011 #2 cybercore Premier Member Enjoys Windows 7 Forums  
Join Date Jul 2009 Posts 7,900 Re: ntoskrnl.exe BSOD with many games BugCheck 116, {fffffa8004d3a4e0, fffff88003a073bc, 0, 2}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Stop 0x116:

- bad video card
- bad driver
- overclocked hardware
- wrong bios setup

Uninstall Daemon Tools.

Test your hardware:

FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Memtest86+ - Advanced Memory Diagnostic Tool

Crash Dumps:

Code: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [F:aMinidumpD M PDMP31811-17035-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (2 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16695.amd64fre.win7_gdr.101026-1503 Machine Name: Kernel base = 0xfffff800`02e15000 PsLoadedModuleList = 0xfffff800`03052e50 Debug session time: Fri Mar 18 08:45:31.912 2011 (UTC - 4:00) System Uptime: 0 days 0:22:24.754 Loading Kernel Symbols ................................................ Loading User Symbols Missing image name, possible paged-out or corrupt data. Loading unloaded module list . ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 116, {fffffa8004d3a4e0, fffff88003a073bc, 0, 2} Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE ) Followup: MachineOwner --------- 0: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* VIDEO_TDR_FAILURE (116) Attempt to reset the display driver and recover from timeout failed. Arguments: Arg1: fffffa8004d3a4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT). Arg2: fffff88003a073bc, The pointer into responsible device driver module (e.g. owner tag). Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation. Arg4: 0000000000000002, Optional internal context dependent data. Debugging Details: ------------------ OVERLAPPED_MODULE: Address regions for 'tcpip' and 'Unknown_Module_00000000`00000000' overlap FAULTING_IP: +6138393266643063 fffff880`03a073bc ?? ??? DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT CUSTOMER_CRASH_COUNT: 1 BUGCHECK_STR: 0x116 PROCESS_NAME: System CURRENT_IRQL: 0 STACK_TEXT: fffff800`00b9cc98 fffff800`02e9324a : 00000000`002cb2df fffffa80`05081dd8 00000000`00000000 fffff800`02fffe80 : 0xfffff880`03bca9c2 fffff800`00b9cca0 fffff800`02e8debc : fffff800`02fffe80 fffff800`00000000 00000000`00000000 fffffa80`046ca0a0 : nt!PoIdle+0x53a fffff800`00b9cd80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x2c STACK_COMMAND: kb SYMBOL_NAME: ANALYSIS_INCONCLUSIVE FOLLOWUP_NAME: MachineOwner MODULE_NAME: Unknown_Module IMAGE_NAME: Unknown_Image DEBUG_FLR_IMAGE_TIMESTAMP: 0 FAILURE_BUCKET_ID: X64_0x116_ANALYSIS_INCONCLUSIVE BUCKET_ID: X64_0x116_ANALYSIS_INCONCLUSIVE Followup: MachineOwner ---------

Drivers:

Code: start end module name fffff880`01000000 fffff880`01057000 ACPI ACPI.sys unavailable (00000000) fffff880`00e4d000 fffff880`00e58000 amdxata amdxata.sys unavailable (00000000) fffff880`00e1a000 fffff880`00e23000 atapi atapi.sys unavailable (00000000) fffff880`00e23000 fffff880`00e4d000 ataport ataport.SYS unavailable (00000000) fffff880`00cd9000 fffff880`00d99000 CI CI.dll unavailable (00000000) fffff880`01200000 fffff880`01230000 CLASSPNP CLASSPNP.SYS unavailable (00000000) fffff880`00c7b000 fffff880`00cd9000 CLFS CLFS.SYS unavailable (00000000) fffff880`014c7000 fffff880`0153a000 cng cng.sys unavailable (00000000) fffff880`015e4000 fffff880`015fa000 disk disk.sys unavailable (00000000) fffff880`00d99000 fffff880`00dad000 fileinfo fileinfo.sys unavailable (00000000) fffff880`00e58000 fffff880`00ea4000 fltmgr fltmgr.sys unavailable (00000000) fffff880`0154b000 fffff880`01555000 Fs_Rec Fs_Rec.sys unavailable (00000000) fffff880`01400000 fffff880`0143a000 fvevol fvevol.sys unavailable (00000000) fffff880`01600000 fffff880`0164a000 fwpkclnt fwpkclnt.sys unavailable (00000000) fffff800`033f2000 fffff800`0343b000 hal hal.dll Mon Jul 13 21:27:36 2009 (4A5BDF08) fffff880`015db000 fffff880`015e4000 hwpolicy hwpolicy.sys unavailable (00000000) fffff800`00bbc000 fffff800`00bc6000 kdcom kdcom.dll Mon Jul 13 21:31:07 2009 (4A5BDFDB) fffff880`014ad000 fffff880`014c7000 ksecdd ksecdd.sys unavailable (00000000) fffff880`017b0000 fffff880`017db000 ksecpkg ksecpkg.sys unavailable (00000000) fffff880`00c23000 fffff880`00c67000 mcupdate mcupdate.dll unavailable (00000000) fffff880`00e00000 fffff880`00e1a000 mountmgr mountmgr.sys unavailable (00000000) fffff880`01057000 fffff880`01061000 msisadrv msisadrv.sys unavailable (00000000) fffff880`0144f000 fffff880`014ad000 msrpc msrpc.sys unavailable (00000000) fffff880`017ea000 fffff880`017fc000 mup mup.sys unavailable (00000000) fffff880`0165e000 fffff880`01750000 ndis ndis.sys unavailable (00000000) fffff880`01750000 fffff880`017b0000 NETIO NETIO.SYS unavailable (00000000) fffff800`02e15000 fffff800`033f2000 nt ntkrnlmp.exe Tue Oct 26 22:43:09 2010 (4CC791BD) fffff880`01241000 fffff880`013e4000 Ntfs Ntfs.sys unavailable (00000000) fffff880`011d5000 fffff880`011ea000 partmgr partmgr.sys unavailable (00000000) fffff880`00f5e000 fffff880`00f91000 pci pci.sys unavailable (00000000) fffff880`01061000 fffff880`01068000 pciide pciide.sys unavailable (00000000) fffff880`00fed000 fffff880`00ffd000 PCIIDEX PCIIDEX.SYS unavailable (00000000) fffff880`0153a000 fffff880`0154b000 pcw pcw.sys unavailable (00000000) fffff880`00c67000 fffff880`00c7b000 PSHED PSHED.dll unavailable (00000000) fffff880`015a1000 fffff880`015db000 rdyboost rdyboost.sys unavailable (00000000) fffff880`01199000 fffff880`011c8000 SCSIPORT SCSIPORT.SYS unavailable (00000000) fffff880`017e3000 fffff880`017ea000 speedfan speedfan.sys unavailable (00000000) fffff880`017db000 fffff880`017e3000 spldr spldr.sys unavailable (00000000) fffff880`0106a000 fffff880`01190000 sptd sptd.sys unavailable (00000000) fffff880`01803000 fffff880`01a00000 tcpip tcpip.sys unavailable (00000000) d583aa3a`acd0676d d583aa3b`0b1fd4e0 Unknown_Module_d583aa3a_acd0676d Unknown_Module_d583aa3a`acd0676d unavailable (00000000) fffff880`011c8000 fffff880`011d5000 vdrvroot vdrvroot.sys unavailable (00000000) fffff880`0164a000 fffff880`0165a000 vmstorfl vmstorfl.sys unavailable (00000000) fffff880`011ea000 fffff880`011ff000 volmgr volmgr.sys unavailable (00000000) fffff880`00f91000 fffff880`00fed000 volmgrx volmgrx.sys unavailable (00000000) fffff880`01555000 fffff880`015a1000 volsnap volsnap.sys unavailable (00000000) fffff880`00eab000 fffff880`00f4f000 Wdf01000 Wdf01000.sys unavailable (00000000) fffff880`00f4f000 fffff880`00f5e000 WDFLDR WDFLDR.SYS unavailable (00000000) fffff880`01190000 fffff880`01199000 WMILIB WMILIB.SYS unavailable (00000000) Missing image name, possible paged-out or corrupt data. Unloaded modules: 554a7370`00006000 554a7370`7800f800 Unknown_Module_554a7370`00006000 Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 78009800




BSOD happens frequently either during high load (gameing, video editing etc...) or when a USB device is plugged in. I'm about to buy a new mobo because of this.... thoughts?

Ram has been stress tested in another computer and passes fine. but fails on mine. (memtest86+)

-AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3
-16 GB RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) DDR3 1333 RAM
-2x Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB SATA III MLC Internal Solid State Drive (programs only) (In RAID 0)
-2X Western Digital Caviar Green WD20EARS 2TB SATA 3.0Gb/s (In RAID 0)
-ATI 6870 1GB PCI express 2.1 256-bit video card
-GIGABYTE GA-880GA-UD3H SATA 6gb/s 3.0 USB 64 Bit Mobo
-CORSAIR Enthusiast Series CMPSU-650TX 650W power supply
-Windows 7 Ultimate 64 bit
-Presonas Firestudio Project Firewire recording interface
-Dual monitor set up (Samsung 226bw (s)/Gateway 700g) via DVI
-Brother HL-1440 laser printer
-Logitech MX 518 High Performance Optical Gaming Mouse (Metal) w/sUrface1030 original pad

see my last tread with more information.
BSOD's on new home build w/ full description Attached Files dballs-10-27-12-BSOD.zip (2.47 MB, 25 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 10-27-2012 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,333 Re: About to buy a new mobo. BSOD on high load and USB What test does the RAM fail?
If it's Prime95 - it tests 3 things:
- RAM
- CPU cache
- memory controller
It also depends on which test you ran.
The Blend test is the most common - and it stresses the RAM the most.

But since you've passed stress test on another system, I'd suspect either the CPU or the memory controller (which, I suspect, is on your CPU). I'd suggest these free diagnostics: Hardware Diagnostics I'd suggest that running the CPU diagnostics are a priority.

FYI - I am not a RAM person - so I have no idea about adjusting timings/settings/voltages (other than the suggestions from the RAM manufacturer).

Only 6% free space (approx) on the C: drive. Windows needs 15% free space to function at optimum efficiency. Please free up 15% free space (total) on your C: drive.

SSD stuff:
- update the firmware to the latest available version for your SSD(s)
- update your storage controller drivers (on the motherboard) to the latest available version. If that version isn't from 2012, please post back and we'll see what we can find.

AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems.
Please un-install all AMD/ATI video stuff from Control Panel...Programs...Un-install a program
Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page)
Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

If the device (AODDriver or AODDriver4.01) remains a problem, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Non-Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Un-install". Reboot for changes to take affect. Sometimes the driver remains and continues to cause BSOD's. If this is the case for you, post back and we'll give further instructions for safely removing it.

If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

Please update/remove these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

AtiPcie.sys Tue May 5 11:00:22 2009 (4A005486)
ATI PCIE Driver for ATI PCIE chipset or [br] ATI PCI Express (3GIO) Filter[br]Found in my ATI video drivers (I have an Intel chipset)
http://www.carrona.org/drivers/driver.php?id=AtiPcie.sys

nusb3hub.sys Thu Nov 18 20:34:24 2010 (4CE5D420)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues)
http://www.carrona.org/drivers/driver.php?id=nusb3hub.sys

nusb3xhc.sys Thu Nov 18 20:34:25 2010 (4CE5D421)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues)
http://www.carrona.org/drivers/driver.php?id=nusb3xhc.sys

AODDriver2.sys Wed Jun 15 04:38:35 2011 (4DF86F8B)
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys

Analysis:
The following is for informational purposes only.
Code: **************************Thu Oct 25 04:17:05.203 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__102512-23493-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64 Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333 System Uptime:0 days 0:23:20.327 BugCheck Code: BugCheck F4, {3, fffffa800e9bf060, fffffa800e9bf340, fffff80003398460} Probably caused by :wininit.exe BugCheck Info: CRITICAL_OBJECT_TERMINATION (f4) Arguments: Arg1: 0000000000000003, Process Arg2: fffffa800e9bf060, Terminating object Arg3: fffffa800e9bf340, Process image file name Arg4: fffff80003398460, Explanatory message (ascii) PROCESS_NAME: wininit.exe BUGCHECK_STR: 0xF4_IOERR DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_wininit.exe BIOS Version F7 BIOS Release Date 11/24/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name GA-880GA-UD3H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` 3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
Code: **************************Thu Oct 25 04:17:05.203 2012 (UTC - 4:00)************************** AtiPcie.sys Tue May 5 11:00:22 2009 (4A005486) GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0) ahcix64s.sys Thu Dec 3 20:53:02 2009 (4B186B7E) usbfilter.sys Tue Dec 22 03:26:22 2009 (4B3082AE) amdiox64.sys Thu Feb 18 10:17:53 2010 (4B7D5A21) amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA) nusb3hub.sys Thu Nov 18 20:34:24 2010 (4CE5D420) nusb3xhc.sys Thu Nov 18 20:34:25 2010 (4CE5D421) AODDriver2.sys Wed Jun 15 04:38:35 2011 (4DF86F8B) RtHDMIVX.sys Wed Jul 6 06:09:50 2011 (4E14346E) RTKVHD64.sys Fri Aug 12 01:28:04 2011 (4E44B9E4) Rt64win7.sys Tue Aug 23 09:55:41 2011 (4E53B15D) cpuz135_x64.sys Wed Sep 21 04:23:41 2011 (4E799F0D) PxHlpa64.sys Mon Oct 17 10:29:34 2011 (4E9C3BCE) atikmpag.sys Mon Dec 5 21:12:14 2011 (4EDD79FE) atikmdag.sys Mon Dec 5 21:52:23 2011 (4EDD8367) aswFsBlk.SYS Tue Aug 21 05:04:55 2012 (50334F37) aswMonFlt.sys Tue Aug 21 05:05:00 2012 (50334F3C) aswTdi.SYS Tue Aug 21 05:05:01 2012 (50334F3D) aswrdr2.sys Tue Aug 21 05:05:16 2012 (50334F4C) aswSP.SYS Tue Aug 21 05:05:54 2012 (50334F72) aswSnx.SYS Tue Aug 21 05:05:56 2012 (50334F74) http://www.carrona.org/drivers/driver.php?id=AtiPcie.sys
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=ahcix64s.sys
http://www.carrona.org/drivers/driver.php?id=usbfilter.sys
http://www.carrona.org/drivers/driver.php?id=amdiox64.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=nusb3hub.sys
http://www.carrona.org/drivers/driver.php?id=nusb3xhc.sys
http://www.carrona.org/drivers/driver.php?id=AODDriver2.sys
http://www.carrona.org/drivers/driver.php?id=RtHDMIVX.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=cpuz135_x64.sys
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys
http://www.carrona.org/drivers/driver.php?id=atikmpag.sys
http://www.carrona.org/drivers/driver.php?id=atikmdag.sys
http://www.carrona.org/drivers/driver.php?id=aswFsBlk.SYS
http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys
http://www.carrona.org/drivers/driver.php?id=aswTdi.SYS
http://www.carrona.org/drivers/driver.php?id=aswrdr2.sys
http://www.carrona.org/drivers/driver.php?id=aswSP.SYS
http://www.carrona.org/drivers/driver.php?id=aswSnx.SYS




I've been having random blue screens while playing League of Legends on a new computer that was given to me by a friend who had someone else build it for him. The BSODs come randomly during games and its been happening ever since I began playing on the computer. So I got the computer about 6 months ago and I've been having this same problem for about 6 months; I was lazy and never got around to fixing it until now. I've also noticed a trend that if I have less applications open there will be a less chance for my computer blue screening while playing (if my helps). My computer data is attached, and hopefully someone would be kind enough to help me out. Thanks! Attached Files New folder.zip (2.72 MB, 10 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 04-14-2013 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,333 Re: another BSOD, gaming Interestingly I noticed gdrv.sys involved in a BSOD back in 2012.
It's known to cause BSOD's on some Windows systems. Please un-install the Gigabyte EasySaver utility. Also, there's usually another problem program installed (EasyTune6 or ET6) - please un-install that also.

Beyond that there are 5 different BSOD errors in the latest 13 memory dumps. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

If the BSOD's don't stop, let's start by running Driver Verifier according to these instructions: Driver Verifier Settings

As time allows, start on these free hardware diagnostics: Hardware Diagnostics

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

adfs.SYS Thu Jun 26 16:52:37 2008 (48640195)
Adobe File System Driver
http://www.carrona.org/drivers/driver.php?id=adfs.SYS

AppleCharger.sys Thu Apr 22 03:05:49 2010 (4BCFF54D)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys

Analysis:
The following is for informational purposes only.
Code: **************************Tue Apr 9 22:34:47.171 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps40913-22027-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:1 days 6:30:21.154 Probably caused by :dxgkrnl.sys ( dxgkrnl!CWin32kLocks::Unlock+ae ) BugCheck 50, {fffff960011374a0, 0, fffff9600021e985, 2} BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) Arguments: Arg1: fffff960011374a0, memory referenced. Arg2: 0000000000000000, value 0 = read operation, 1 = write operation. Arg3: fffff9600021e985, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000002, (reserved) BUGCHECK_STR: 0x50 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: Skype.exe FAILURE_BUCKET_ID: X64_0x50_dxgkrnl!CWin32kLocks::Unlock+ae CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Apr 6 19:27:07.683 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps40613-24866-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 5:26:01.057 Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+fec ) BugCheck 1000007E, {ffffffffc0000005, fffff880053e57ac, fffff88003dd84d8, fffff88003dd7d30} BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) Arguments: Arg1: ffffffffc0000005, The exception code that was not handled Arg2: fffff880053e57ac, The address that the exception occurred at Arg3: fffff88003dd84d8, Exception Record Address Arg4: fffff88003dd7d30, Context Record Address PROCESS_NAME: System BUGCHECK_STR: 0x7E DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+fec CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Apr 5 20:32:58.873 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps40513-21949-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 4:25:45.246 *** ERROR: Module load completed but symbols could not be loaded for afd.sys Probably caused by :afd.sys ( afd+41031 ) BugCheck 1E, {ffffffffc0000005, fffff88002d2a031, 0, 80} BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e) Arguments: Arg1: ffffffffc0000005, The exception code that was not handled Arg2: fffff88002d2a031, The address that the exception occurred at Arg3: 0000000000000000, Parameter 0 of the exception Arg4: 0000000000000080, Parameter 1 of the exception BUGCHECK_STR: 0x1E_c0000005_R PROCESS_NAME: Skype.exe FAILURE_BUCKET_ID: X64_0x1E_c0000005_R_afd+41031 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Thu Mar 28 23:31:35.806 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps32813-22417-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 7:03:10.179 Probably caused by :win32k.sys ( win32k!XFORMOBJ_iGetFloatObjXform+4901 ) BugCheck 3B, {c0000005, fffff9600010458d, fffff8800af23ab0, 0} BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b) Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff9600010458d, Address of the instruction which caused the bugcheck Arg3: fffff8800af23ab0, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. BUGCHECK_STR: 0x3B DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: SndVol.exe FAILURE_BUCKET_ID: X64_0x3B_win32k!XFORMOBJ_iGetFloatObjXform+4901 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Wed Mar 27 17:57:43.562 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps32713-24507-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 2:58:34.935 Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+c4 ) BugCheck 1000007E, {ffffffffc0000005, fffff88004526d90, fffff88002e1b6a8, fffff88002e1af00} BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) Arguments: Arg1: ffffffffc0000005, The exception code that was not handled Arg2: fffff88004526d90, The address that the exception occurred at Arg3: fffff88002e1b6a8, Exception Record Address Arg4: fffff88002e1af00, Context Record Address PROCESS_NAME: System BUGCHECK_STR: 0x7E DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+c4 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sun Mar 17 17:13:48.124 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps31713-19640-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 2:55:13.108 Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+c4 ) BugCheck 1000007E, {ffffffffc0000005, fffff880053c6d90, fffff880059d16a8, fffff880059d0f00} BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) Arguments: Arg1: ffffffffc0000005, The exception code that was not handled Arg2: fffff880053c6d90, The address that the exception occurred at Arg3: fffff880059d16a8, Exception Record Address Arg4: fffff880059d0f00, Context Record Address PROCESS_NAME: System BUGCHECK_STR: 0x7E DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+c4 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Thu Mar 14 16:37:01.924 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps31413-27549-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 2:17:46.908 *** WARNING: Unable to verify timestamp for nvlddmkm.sys *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys Probably caused by :hardware ( nvlddmkm+289c36 ) BugCheck D1, {e8eceb4d, 2, 1, fffff88004afac36} BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) Arguments: Arg1: 00000000e8eceb4d, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000001, value 0 = read operation, 1 = write operation Arg4: fffff88004afac36, address which referenced memory BUGCHECK_STR: 0xD1 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: League of Lege FAILURE_BUCKET_ID: X64_IP_MISALIGNED_nvlddmkm.sys CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Tue Mar 5 00:29:40.777 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps30413-20155-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 7:30:28.150 Probably caused by :win32k.sys ( win32k!W32pArgumentTable+8568 ) BugCheck 50, {fffff960402a7478, 0, fffff960000dde84, 5} BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) Arguments: Arg1: fffff960402a7478, memory referenced. Arg2: 0000000000000000, value 0 = read operation, 1 = write operation. Arg3: fffff960000dde84, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000005, (reserved) BUGCHECK_STR: 0x50 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: League of Lege FAILURE_BUCKET_ID: X64_0x50_win32k!W32pArgumentTable+8568 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Mar 1 21:54:40.821 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps30113-22308-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 0:30:05.195 Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+201 ) BugCheck 50, {fffff8a00b951d08, 1, fffff8800433ce79, 0} BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) Arguments: Arg1: fffff8a00b951d08, memory referenced. Arg2: 0000000000000001, value 0 = read operation, 1 = write operation. Arg3: fffff8800433ce79, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000000, (reserved) BUGCHECK_STR: 0x50 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: League of Lege FAILURE_BUCKET_ID: X64_0x50_dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+201 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Mar 1 21:23:59.644 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps30113-19765-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 4:21:53.018 *** WARNING: Unable to verify timestamp for nvlddmkm.sys *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys Probably caused by :nvlddmkm.sys ( nvlddmkm+8a738e ) BugCheck 50, {ffffda801d4b2ee8, 1, fffff880050e838e, 7} BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) Arguments: Arg1: ffffda801d4b2ee8, memory referenced. Arg2: 0000000000000001, value 0 = read operation, 1 = write operation. Arg3: fffff880050e838e, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000007, (reserved) BUGCHECK_STR: 0x50 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: League of Lege FAILURE_BUCKET_ID: X64_0x50_nvlddmkm+8a738e CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Feb 23 23:01:07.930 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps22313-21621-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 4:32:58.914 Probably caused by :hardware ( win32k!EngUnlockDirectDrawSurface+3267 ) BugCheck 50, {fffffa7f8978bf94, 1, fffff960001e196f, 7} BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50) Arguments: Arg1: fffffa7f8978bf94, memory referenced. Arg2: 0000000000000001, value 0 = read operation, 1 = write operation. Arg3: fffff960001e196f, If non-zero, the instruction address which referenced the bad memory address. Arg4: 0000000000000007, (reserved) BUGCHECK_STR: 0x50 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: dwm.exe FAILURE_BUCKET_ID: X64_IP_MISALIGNED CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Wed Feb 20 23:01:47.038 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps22013-23212-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 7:01:24.411 *** WARNING: Unable to verify timestamp for Rt64win7.sys *** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys Probably caused by :Rt64win7.sys ( Rt64win7+4574 ) BugCheck D1, {2, b, 8, 2} BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) Arguments: Arg1: 0000000000000002, memory referenced Arg2: 000000000000000b, IRQL Arg3: 0000000000000008, value 0 = read operation, 1 = write operation Arg4: 0000000000000002, address which referenced memory PROCESS_NAME: League of Lege BUGCHECK_STR: 0xD1 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_Rt64win7+4574 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sun Feb 17 02:13:52.689 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps21713-27580-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431 System Uptime:0 days 6:59:54.673 Probably caused by :dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::BeginCPUAccess+171 ) BugCheck 3B, {c0000005, fffff8800438b005, fffff88003d60fc0, 0} BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b) Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff8800438b005, Address of the instruction which caused the bugcheck Arg3: fffff88003d60fc0, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. BUGCHECK_STR: 0x3B DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: League of Lege FAILURE_BUCKET_ID: X64_0x3B_dxgmms1!VIDMM_GLOBAL::BeginCPUAccess+171 CPUID: "Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz" MaxSpeed: 2930 CurrentSpeed: 2933 BIOS Version F6 BIOS Release Date 07/06/2010 Manufacturer Gigabyte Technology Co., Ltd. Product Name H55M-S2H จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` 3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
Code: **************************Tue Apr 9 22:34:47.171 2013 (UTC - 4:00)************************** adfs.SYS Thu Jun 26 16:52:37 2008 (48640195) intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD) Rt64win7.sys Thu Mar 4 08:42:52 2010 (4B8FB8DC) amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA) AppleCharger.sys Thu Apr 22 03:05:49 2010 (4BCFF54D) nvBridge.kmd Fri Jan 7 20:57:22 2011 (4D27C482) GEARAspiWDM.sys Thu May 3 15:56:17 2012 (4FA2E2E1) nvlddmkm.sys Sat Dec 29 01:47:52 2012 (50DE9218) http://www.carrona.org/drivers/driver.php?id=adfs.SYS
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys
http://www.carrona.org/drivers/driver.php?id=nvBridge.kmd
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys




BSOD error message

0x0000007f (ox0000000000000008, 0x0000000080031, ox00000000000006f8, oxfffff800028dabd0)

Just curious what the stuff in the parenthesis means? i believe ox7f is hardware/driver issue, but i'm not a doctor. i don't know.

This has been happening it seems almost randomly. I have been working my computer pretty hard but i expect the best. I was pondering replacing some parts because I realize machines get old. shouldn't be, but the first thing i'm addressing is heat. new computer case in the mail for more fan room, and the first building block when i build a new system

OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TIMMY-PC
System Manufacturer BIOSTAR Group
System Model TA790GX 128M
System Type x64-based PC
Processor AMD Phenom(tm) II X4 940 Processor, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 080014, 1/13/2009
SMBIOS Version 2.5
Windows Directory C:Windows
System Directory C:Windowssystem32
Boot Device DeviceHarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Timmy-PCTimmy
Time Zone US Mountain Standard Time
Installed Physical Memory (RAM) 6.00 GB
Total Physical Memory 6.00 GB
Available Physical Memory 4.51 GB
Total Virtual Memory 12.0 GB
Available Virtual Memory 10.3 GB
Page File Space 6.00 GB
Page File C:pagefile.sys

Just in case you need that.

Thanks for your help! Attached Files W7F_13-04-2013.rar (287.1 KB, 21 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 04-14-2013 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,333 Re: BSOD - w7f and error codes attached Info on the STOP 0x7F error: BSOD Index
Please note the "Usual Causes" section up near the top of that section
Also, you'll have to scroll down to see what the stuff in the parentheses means:
Code: WinDbg Help File Entry: The UNEXPECTED_KERNEL_MODE_TRAP bug check has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap. This trap could be a bound trap (a trap the kernel is not permitted to catch) or a double fault (a fault that occurred while processing an earlier fault, which always results in a system failure).Parameters The first parameter that appears on the blue screen specifies the trap number. The most common trap codes include the following: 0x00000000, or Divide by Zero Error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems, or software failures can cause this error.0x00000004, or Overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) flag is set.0x00000005, or Bounds Check Fault, indicates that the processor, while executing a BOUND instruction, finds that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.0x00000006, or Invalid Opcode, indicates that the processor tries to execute an invalid instruction. This error typically occurs when the instruction pointer has become corrupted and is pointing to the wrong location. The most common cause of this error is hardware memory corruption.0x00000008, or Double Fault, indicates that an exception occurs during a call to the handler for a prior exception. Typically, the two exceptions are handled serially. However, there are several exceptions that cannot be handled serially, and in this situation the processor signals a double fault. There are two common causes of a double fault: A kernel stack overflow. This overflow occurs when a guard page is hit, and the kernel tries to push a trap frame. Because there is no stack left, a stack overflow results, causing the double fault. If you think this overview has occurred, use !thread to determine the stack limits, and then use kb (Display Stack Backtrace) with a large parameter (for example, kb 100) to display the full stack.A hardware problem. The less-common trap codes include the following: 0x00000001 — A system-debugger call0x00000003 — A debugger breakpoint0x00000007 — A hardware coprocessor instruction with no coprocessor present0x0000000A — A corrupted Task State Segment0x0000000B — An access to a memory segment that was not present0x0000000C — An access to memory beyond the limits of a stack0x0000000D — An exception not covered by some other exception; a protection fault that pertains to access violations for applications For other trap numbers, see an Intel architecture manual.Cause Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails. A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same stack. For example, if two file system filter drivers are attached to the same stack and then the file system recurses back in, the stack overflows.Resolving the Problem Debugging: Always begin with the !analyze extension. If this extension is not sufficient, use the kv (Display Stack Backtrace) debugger command. If kv shows a taskGate, use the .tss (Display Task State Segment) command on the part before the colon.If kv shows a trap frame, use the .trap (Display Trap Frame) command to format the frame.Otherwise, use the .trap (Display Trap Frame) command on the appropriate frame. (On x86-based platforms, this frame is associated with the procedure NT!KiTrap.) After using one of these commands, use kv again to display the new stack. Troubleshooting: If you recently added hardware to the computer, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. Run hardware diagnostics that the system manufacturer supplies to determine which hardware component failed. The memory scanner is especially important. Faulty or mismatched memory can cause this bug check. For more informaiton about these procedures, see the owner's manual for your computer. Check that all adapter cards in the computer are properly seated. Use an ink eraser or an electrical contact treatment, available at electronics supply stores, to ensure adapter card contacts are clean. If the error appears on a newly installed system, check the availability of updates for the BIOS, the SCSI controller, or network cards. These kind of updates are typically available on the Web site or BBS of the hardware manufacturer. Confirm that all hard disk drives, hard disk controllers, and SCSI adapters are listed in the Microsoft Windows Marketplace Tested Products List. If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, under this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console in order to access the file. Also restart your computer, and then press F8 at the character-based menu that displays the operating system choices. At the Advanced Options menu, select the Last Known Good Configuration option. This option is most effective when you add only one driver or service at a time. Overclocking (setting the CPU to run at speeds above the rated specification) can cause this error. If you have overclocked the computer that is experiencing the error, return the CPU to the default clock speed setting. Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing the error. You can also disable memory caching of the BIOS to try to resolve the problem. If you encountered this error while upgrading to a new version of the Windows operating system, the error might be caused by a device driver, a system service, a virus scanner, or a backup tool that is incompatible with the new version. If possible, remove all third-party device drivers and system services and disable any virus scanners before you upgrade. Contact the software manufacturer to obtain updates of these tools. Also make sure that you have installed the latest Windows Service Pack. Finally, if all the above steps do not resolve the error, take the system motherboard to a repair facility for diagnostic testing. A crack, a scratched trace, or a defective component on the motherboard can also cause this error. WinDbg Output Example: UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a *portion* of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050031 Arg3: 00000000000006f8 Arg4: fffff80002af243d There are no memory dumps included in the uploaded files, please zip up the contents of the C:WindowsMinidump folder and upload it with your next post. Please check this page to ensure the system is set to save minidumps: Set MiniDump Finally, don't use disk cleaning programs (such as CCleaner) while we're troubleshooting (they delete the files that we need).

Only 118 Windows Updates installed. Most systems have 150 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

As there's no evidence of BSOD's in the WER section of MSINFO32, I'd have to suspect that this might be a hardware problem. Please start with these free hardware diagnostics: Hardware Diagnostics

Good luck!




Hello all! I have been trying to fix a 64-bit Windows 7 Professional workstation in a domain environment. Basic system info listed below:

Operating System: Windows 7 Professional 64-bit (6.1, Build 7601)
Service Pack 1 (7601.win7sp1_gdr.120830-0333)
System Manufacturer: Dell Inc.System Model: OptiPlex 580BIOS: BIOS Date: 06/19/12 14:12:07 Ver: 0.07 A07Processor: AMD Phenom(tm) II X2 B55 Processor (2 CPUs), ~3.0GHzDisplay: ATI Radeon HD 4200Memory: 4096MB RAMAvailable OS Memory: 3836MB RAMPage File: 1613MB used, 6058MB availableNetwork Cards: 3 Installed
[01]: Broadcom NetXtreme Gigabit Ethernet[02]: Compact Wireless-G USB Adapter[03]: Microsoft Virtual WiFi Miniport Adapter

This PC is two years old and essentially started to crash out of the box. I put up with it for about a year-and-a-half because the crashes were somewhat infrequent, maybe occuring every two to three weeks. About three months ago I had become fed up with the crashes and purchased a software support contract with Dell. Although I had performed multiple diagnostic tests on my own to search for hardware failure (never found any issues), they made me rerun those same tests to prove there were no hardware issues. After the diagnostics came back clean, they told me I would have to reformat the hard drive and reinstall windows (which had come installed OEM). The good folks at Dell assured me this would be the only fix, and while I did not really agree with them, I complied with their suggestion.

Well, despite following their instructions, the PC in question continues to experience the occasional BSOD after reformatting. So whatever Dell thought the cause/cure would be, reinstalling Windows was not the answer to the problem. I'm not sure if this is a driver issue, or something completely different. When I run bugchecks on the Dump Files, the results typically state that the crashes were probably caused by Ntfs.sys, ntkrnlmp.exe, and win32k.sys.

Last weekend I ran memtest86+ for about 16 hours, checking each individual memory stick in each slot for 8+ passes, but no errors were found. I ran Driver Verifier for several days straight (still running it now) but could not crash the PC while stressing the third party drivers. If I can't isolate a hardware or a driver issue, then what exactly could be causing this? I have just about had it with this PC, so any help would be greatly appreciated!

Thanks,
jmt83 Attached Files W7F_02-02-2013.zip (1.89 MB, 4 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Pro
Computer Type Dell Optiplex 580
OS Service Pack SP1
Internet Explorer Version 9
CPU Type and Speed 2x AMD Phenom II X2 B55 Processor
CPU Cooling HeatbSink (sorry, not very specific).
System BIOS Revision Version A05
System Memory Type 4GB, Non-ECC (2x2GB)
System Memory Speed 1333MHz DDR3
Video Card Type and Speed 256MB ATI Raedeon HD 3450
Video Card Cooling HeatbSink (sorry, not very specific).
Storage Controller No RAID
Hard Drive 250GB SATA 3.0BG/s and 8MB Data Burst Cache
Optical Drives DVD+/-RW 16x
Anti-virus Software Microsoft Security Essentials
Productivity Suite Adobe Acrobat 9 pro, Office 2010
System Install Date Jan 2011
Computer Skill Level Average Ability
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 02-02-2013 #2 jmt83 Junior Member  Thread Starter Enjoys Windows 7 Forums  
Join Date May 2012 Age 36 Posts 11 Re: Dubugging shows BSOD "probably caused by Ntfs.sys, ntkrnlmp.exe, win32k.sys." One more thing I forgot to add; I did receive some advice to update the video driver a few weeks ago. I used a program called Driver Fusion from Treexy to remove all the AMD components from the PC that I could. I then downloaded a more recent version of the ATI
Radeon HD 4200 display driver v 8.970.100.3000, released 07/2012 (my previous version was v 8.850.0.0, released 04/2011). However, the PC has crashed 3 or 4 times since. So although it was probably a good idea to update the video driver, this alone was not enough to fix the issue.




Been BSOD after upgrading from vista to windows 7
The BSOD is very random sometime the system runs fine and sometime it just BSOD alot
I am using a laptop and the model is:
HP- DV5-1114AX
I would be very thankful if anyone can help me out.

i have attach some files Attached Thumbnails     Attached Files Seven Forums.rar (1.57 MB, 216 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 01-05-2011 #2 Captain Jack Tier 2 Moderator Microsoft MVP - Windows Expert
(IT Pro)  
Join Date Mar 2010 Posts 959 Blog Entries1 Re: BSOD cause by ntoskrnl.exe and hal.dll :( Hello and Welcome to W7F !

Seems like some Hardware has caused the System to crash.

Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! ซ Captain Debugger

Here are few check list want to check Stop 0x124 - what it means and what to try - Windows 7 Forums

Disconnect all your Bluetooth Devices if it's build-in to your System then install the drivers. I found few devices that has issues.

Code: Base System Device PCIVEN_197B&DEV_2384&SUBSYS_3600103C&REV_004&3B99D9BB&0&0450 This device is disabled. Not Available USBVID_138A&PID_00015&2377BCB7&0&1 This device is disabled. Bluetooth Peripheral Device BTHENUM{0000110E-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Bluetooth Peripheral Device BTHENUM{0000111B-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Bluetooth Peripheral Device BTHENUM{00000002-0000-1000-8000-0002EE000002}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Bluetooth Peripheral Device BTHENUM{00005005-0000-1000-8000-0002EE000001}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Bluetooth Peripheral Device BTHENUM{00000004-0000-1000-8000-0002EE000002}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Bluetooth Peripheral Device BTHENUM{00005557-0000-1000-8000-0002EE000001}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Base System Device PCIVEN_197B&DEV_2382&SUBSYS_3600103C&REV_004&3B99D9BB&0&0150 This device is disabled. Base System Device PCIVEN_197B&DEV_2383&SUBSYS_3600103C&REV_004&3B99D9BB&0&0350 This device is disabled. Bluetooth Peripheral Device BTHENUM{00005601-0000-1000-8000-0002EE000001}_VID&00010001_PID&00A37&2EB04CF7&0&00266989CAD8_C00000000 This device is disabled. Bugcheck:

Code: WHEA_UNCORRECTABLE_ERROR (124) A fatal hardware error has occurred. Parameter 1 identifies the type of error source that reported the error. Parameter 2 holds the address of the WHEA_ERROR_RECORD structure that describes the error conditon. Arguments: Arg1: 0000000000000000, Machine Check Exception Arg2: fffffa8004f52038, Address of the WHEA_ERROR_RECORD structure. Arg3: 00000000b66ac000, High order 32-bits of the MCi_STATUS value. Arg4: 0000000000000135, Low order 32-bits of the MCi_STATUS value. Debugging Details: ------------------ BUGCHECK_STR: 0x124_AuthenticAMD CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: explorer.exe CURRENT_IRQL: f STACK_TEXT: fffff880`009f0a08 fffff800`0321d903 : 00000000`00000124 00000000`00000000 fffffa80`04f52038 00000000`b66ac000 : nt!KeBugCheckEx fffff880`009f0a10 fffff800`033da593 : 00000000`00000001 fffffa80`04ef4520 00000000`00000000 fffffa80`04ef4570 : hal!HalBugCheckSystem+0x1e3 fffff880`009f0a50 fffff800`0321d5c8 : 00000000`00000728 fffffa80`04ef4520 fffff880`009f0db0 00000000`00001600 : nt!WheaReportHwError+0x263 fffff880`009f0ab0 fffff800`0321cf1a : fffffa80`04ef4520 fffff880`009f0db0 fffffa80`04ef4520 00000000`00000000 : hal!HalpMcaReportError+0x4c fffff880`009f0c00 fffff800`03210e8f : fffff880`0606d820 00000000`00000001 fffff880`009f0e30 00000000`00000000 : hal!HalpMceHandler+0x9e fffff880`009f0c40 fffff800`032c2fec : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x47 fffff880`009f0c70 fffff800`032c2e53 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c fffff880`009f0db0 fffff960`000e43a9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153 fffff880`0606d7b0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : win32k!HANDLELOCK::vLockHandle+0x29 STACK_COMMAND: kb FOLLOWUP_NAME: MachineOwner MODULE_NAME: hardware IMAGE_NAME: hardware DEBUG_FLR_IMAGE_TIMESTAMP: 0 FAILURE_BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_CACHE BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_CACHE Followup: MachineOwner




This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.

let me know if there's any other information you could use, and how to obtain it.

Please help! Attached Files W7F_15-12-2012.zip (345.7 KB, 16 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System W7 64-bit Home Premium
Computer Type Custom Build
CPU Type and Speed intel i5-2500, stock (~3.3GHz)
CPU Cooling Coolermaster Hyper 512
System Memory Type G.Skill Ripjaws 4GBx2 1600MHz
Video Card Type and Speed EVGA GTX 560 x2
Video Card Cooling stock on both
Power Supply Unit (PSU) Corsair 750W modular
Computer Monitor HP 2711x and 2310m
Headset/Microphone Coolermaster Storm Sirus
Keyboard and Mouse Razer BlackWidow + Naga
Network Speed 15 MB/s
Anti-virus Software MSE and MalwareBytes
Computer Skill Level Average Ability
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 12-16-2012 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,333 Re: Random BSOD - Kernel Data Inpage Error No memory dumps in the uploaded attachment, please follow the directions here to ensure that the system is set to generate memory dumps: Set MiniDump Also, ensure that there is a pagefile set to record the memory dumps. Once we've fixed the BSOD's, feel free to resume not using a pagefile.
No evidence of BSOD's in the WER section of MSINFO32 either - have to wonder if this is a hardware issue.

Although this step isn't required, it is strongly suggested. It's the first step(s) that we run on every computer we take in at work - and it saves us lot's of work when we do find a hardware problem.
Please run these free, bootable diagnostics: Initial Hardware Diagnostics
Post back with the results of the tests in order to let us know if they were done successfully or not.
Thanks! Only 58 updates since SP1, most systems have 130 to 140. Please visit Windows Update and get ALL available updates

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems.
10 Nov 2012 - I'm seeing an upswing in SSD errors - but most appear due to older storage controller drivers. I strongly suggest NOT using storage controller drivers that don't date from 2012 (if none are available, don't connect an SSD to that controller)
This device has problems:
Not Available USBVID_0CF3&PID_30006&DF2EE03&0&7 The drivers for this device are not installed. It is most likely your Atheros BT USB - please install the drivers for it (usually available from the PC manufacturer's website).

Ensure that your USB 3.0 drivers are updated also. The 2010 version of these drivers are known to cause BSOD's (your system is using the 2010 version of these drivers).

Good luck!


Page 1 of 2.
Results 1...20 of 22