checking file system on c internet explorer 9 problem to Results


Sponsored Links:



I am having a problem with multiple BSODs that is driving me CRAZY! I’ve been trying, off and on, for over a year to solve this. About every two to three weeks, the PC crashes out of nowhere. At times it has gone almost three months between crashes, and at others, it has crashed more than once in the same day. This is not my computer, so I never get to see the crashes as they occur. In fact, I’ve never been able to replicate the error. All I know is that this computer has crashed about a month out of the box, and has gone down about 30 times since then. The PC in question is a Dell Optiplex 580 running x64 Windows 7 Pro, SP1. Here are some of the basic specs:

Manufacture Date: 12/29/2010
Operating System: Windows 7 Professional, SP 1 (OEM install)
System Type: 64-bit Operating System
Motherboard: MiTAC International Corp. (Dell p/n 39VR8)
Processor: 2x AMD Phenom II X2 B55 Processor
Memory: 4GB, Non-ECC, 1333MHz DDR3 (2x2GB)
BIOS: Version A05
Hard Disk: Western Digital 250GB SATA 3.0Gb/s and 8MB Data Burst Cache (model no. WD2500AAJS)
Display Adapter: 256MB ATI Raedeon HD 3450
DVD/CD-ROM Drives: HL Data Storage DVD+/-RW 16x (model no. GH50N)
Network Adapters: Broadcom NetXtreme 57xx Gigabit Controller
Sound Controllers: Realtek High Definition Audio
Power Supply: Dell 255W Model No. L255P-01 (Dell p/n T164M)

Using the Windows Debugger tool, no less than eight different stop codes (atikmdag.sys, win32k.sys, ntkrnlmp.exe, Ntfs.sys, Pool_Corruption, fileinfo.sys , win32k.sys, rdbss.sys) are shown as possible culprits. I know, I know… where to start? I have been given advice that this ranges from out-of-date/corrupted drivers, to failing memory, to bad disk sectors on the hard drive. I have approached this from each of those angles, but have come up with more questions than answers.

Here is a list of things I have done over the last few months:
ท Fully updated (at least to my knowledge) all drivers
ท Scanned for viruses/malware using MBAM and MSE (no evidence of malware found)
ท Run full Dell Diagnostic Utility (found no RAM, HDD, or other errors)
ท Stress tested drivers with Verifier.exe (have let run for up to 36 hours with no BSOD)
ท Run sfc /scannow (no integrity violations)
ท Run CHKDSK C: /F /R (results attached)
ท Run several sessions of Memtest86 with no errors (both sticks at once, each individually, every slot)
ท perfmon /report seems good (results attached)
ท Used SeaTools for DOS to run diagnostic on hard drive (passed with no errors)

Everything I have checked out shows that the system is in good health, yet it’s only been 3 days since its last BSOD. I am running out of patience/ideas/options with this issue. I am still holding out hope that someone can point me in the right direction to fix this, but so far, I’ve had little to no success.

In addition to the info requested when submitting a question, I have attached a few other items, including a recent MBAM log, a sfc /scannow log, a System Internals report, the results of a CHKDSK command, a list of non-Microsoft drivers installed on the PC, and a Blue Screen View summary. Thanks in advance for all your help.

JMT83 Attached Files BSOD_Info.zip (1.43 MB, 17 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Pro
Computer Type Dell Optiplex 580
OS Service Pack SP1
Internet Explorer Version 9
CPU Type and Speed 2x AMD Phenom II X2 B55 Processor
CPU Cooling HeatbSink (sorry, not very specific).
System BIOS Revision Version A05
System Memory Type 4GB, Non-ECC (2x2GB)
System Memory Speed 1333MHz DDR3
Video Card Type and Speed 256MB ATI Raedeon HD 3450
Video Card Cooling HeatbSink (sorry, not very specific).
Storage Controller No RAID
Hard Drive 250GB SATA 3.0BG/s and 8MB Data Burst Cache
Optical Drives DVD+/-RW 16x
Anti-virus Software Microsoft Security Essentials
Productivity Suite Adobe Acrobat 9 pro, Office 2010
System Install Date Jan 2011
Computer Skill Level Average Ability
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-28-2012 #2 jmt83 Junior Member  Thread Starter Enjoys Windows 7 Forums  
Join Date May 2012 Age 36 Posts 11 Re: x64 Windows 7 BSODs... Too Many to List in Thread Title! It's probably nothing, but I noticed something while checking out the RAMMon report. It says that DDR3 slots 1 and 2 are empty and that slots 3 and 4 seat the RAM. This is contrary to the way the slots are numbered on the motherboard. They are numbered 4 - 1, starting at 4 (closest to the CPU) working outwards towards 1. If I am to believe Dell, then I have the memory installed in slots 1 and 2. Accourding to RAMMon, the memory is in slots 3 and 4.

That makes me wonder, could the motherboard be marked incorrectly? Does it even matter? Lets assume for just one moment that the memory really is seated in slots 3 and 4. Would that actually cause instability? I can't tell you how many times someone has looked at the bug check code and told me it was probably a memory error. Yet I can't get Memtest86 to display any actual errors. Am I grasping at straws here? Or am I potentially on to something? At this point, I am pretty much desperate for answers. Files attached... Attached Thumbnails     Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Pro
Computer Type Dell Optiplex 580
OS Service Pack SP1
Internet Explorer Version 9
CPU Type and Speed 2x AMD Phenom II X2 B55 Processor
CPU Cooling HeatbSink (sorry, not very specific).
System BIOS Revision Version A05
System Memory Type 4GB, Non-ECC (2x2GB)
System Memory Speed 1333MHz DDR3
Video Card Type and Speed 256MB ATI Raedeon HD 3450
Video Card Cooling HeatbSink (sorry, not very specific).
Storage Controller No RAID
Hard Drive 250GB SATA 3.0BG/s and 8MB Data Burst Cache
Optical Drives DVD+/-RW 16x
Anti-virus Software Microsoft Security Essentials
Productivity Suite Adobe Acrobat 9 pro, Office 2010
System Install Date Jan 2011
Computer Skill Level Average Ability
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-29-2012 #3 jmt83 Junior Member  Thread Starter Enjoys Windows 7 Forums  
Join Date May 2012 Age 36 Posts 11 Re: x64 Windows 7 BSODs... Too Many to List in Thread Title! Does anyone know why CPU-Z returned so little information about the graphics card on this problem PC? Someone suggested that my graphics card may be overclocking without my knowledge, but I am not getting a lot of info about it. Check the difference in data collected between my laptop and the problem PC. Attached Thumbnails   Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Pro
Computer Type Dell Optiplex 580
OS Service Pack SP1
Internet Explorer Version 9
CPU Type and Speed 2x AMD Phenom II X2 B55 Processor
CPU Cooling HeatbSink (sorry, not very specific).
System BIOS Revision Version A05
System Memory Type 4GB, Non-ECC (2x2GB)
System Memory Speed 1333MHz DDR3
Video Card Type and Speed 256MB ATI Raedeon HD 3450
Video Card Cooling HeatbSink (sorry, not very specific).
Storage Controller No RAID
Hard Drive 250GB SATA 3.0BG/s and 8MB Data Burst Cache
Optical Drives DVD+/-RW 16x
Anti-virus Software Microsoft Security Essentials
Productivity Suite Adobe Acrobat 9 pro, Office 2010
System Install Date Jan 2011
Computer Skill Level Average Ability
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-31-2012 #4 MxMn Junior Member Enjoys Windows 7 Forums  
Join Date May 2012 Posts 3 Re: x64 Windows 7 BSODs... Too Many to List in Thread Title! Turn off C1E support in Bios, disable cool n quiet, set CPU core voltage manually and disable any other power saving features. Most probably voltage, increase it in bios if needed.




I ran a sfc /scannow at an Elevated Command Prompt and got the message that there were some corrupted files that it could not fix, to check the CBS.log file. I converted the file to a .text file and have attached it to this post. I have no idea how to interpret this file. I would really appreciate if someone would read the information and give me some advise as to how to proceed further. Thanks so very much in advance! Attached Files CBS.txt (675.7 KB, 16 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Home Premium 64-bit SP1
Computer Type Dell Studio XPS 8000
OS Service Pack 1
Internet Explorer Version 9.0.8112
CPU Type and Speed Intel Core i5 750 @ 2.67GHz Lynnfield 45nm Technology
CPU Idle Temp 71 ฐC
Motherboard Chipset Dell Inc. 0X231R (CPU 1)
System Memory Type 8.00 GB Dual-Channel DDR3
System Memory Speed 531MHz (7-7-7-20)
Video Card Type and Speed 1024MB GeForce GTS 240 (nVidia)
Computer Monitor Sony Bravia 40V4100
Hard Drive 699GB Western Digital WDC WD7501AALS-75J7B0 ATA Device (SATA)
Optical Drives HL-DT-ST DVD+-RW GH50N ATA Device
Keyboard and Mouse Logitech Keyboard, Logitech Trackball Mouse, Wacom Tablet
Anti-virus Software Microsoft Security Essentials
System Install Date December 2009
Computer Skill Level Basic Understanding
Favorite Application Adobe Lightroom, Photoshop, Illustrator and InDesign
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 01-21-2013 #2 Saltgrass Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Just trying to help  
Join Date Oct 2009 Posts 6,555 Re: Please Help Interpret CBS.log File It looks like tcpmon.in is having the problem. The link below will show how to replace it if you have a copy. The listing show which Windows Package the file was part of, with might be an update.

A good source for files is other computers or image backups. There may be others, but there should be at least two on your system, but the listing also notes the backup is corrupted also. Anyway, something about the file does not pass the test.

2013-01-20 12:39:34, Info CSI 00000139 [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

2013-01-20 12:39:37, Info CSI 0000013b [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

2013-01-20 12:39:37, Info CSI 0000013c [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"

2013-01-20 12:39:37, Info CSI 0000013f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"??C:WindowsSystem32"[l:20{10}]"tcpmon.ini"; source file in store is also corrupted Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

If you have an OEM machine, the OEM may have altered the file, which might keep it from checking correctly..




Welcome
to nginx! error on SOME webpages

Welcome to
nginx!

Occassionally getting the above error to sites like Yahoo
Mail, Trendsource.com, a few other sites. Seems to be an intermittent problem.
Occurred shortly after downloaded some programs from cnet.com/download.com which
I later learned has some malware attached to those files. SHAME ON CNET.COM!
What should I do next?

I didnt notice anything bad other than 1 unnamed
toolbar.
O3 - Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} -
(no file)

My Hijack this log:

Logfile of Trend Micro HijackThis
v2.0.2
Scan saved at 10:39:03 AM, on 5/1/2012
Platform: Unknown Windows
(WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot
mode: Normal
Running processes:
C:Program Files
(x86)TOSHIBAConfigFreeNDSTray.exe
C:Program Files (x86)IntelIntel(R)
Rapid Storage TechnologyIAStorIcon.exe
C:Program Files
(x86)AVGAVG2012avgtray.exe
C:Program Files
(x86)CheckPointZoneAlarmzatray.exe
C:Program Files (x86)AVG Secure
Searchvprot.exe
C:Program Files
(x86)TOSHIBAConfigFreeCFSwMgr.exe
C:windowsSysWOW64MacromedFlashFlashUtil32_11_2_202_233_ActiveX.exe
C:ProgramDataAd-Aware
Browsing Protectionadawarebp.exe
C:Program Files
(x86)BrotherControlCenter3brccMCtl.exe
C:Program Files
(x86)Javajre6binjavaw.exe
C:Program Files (x86)Internet
Exploreriexplore.exe
C:Program Files (x86)Trend
MicroHijackThisHijackThis.exe
R1 - HKCUSoftwareMicrosoftInternet
ExplorerMain,Search Page = Bing
R0 -
HKCUSoftwareMicrosoftInternet ExplorerMain,Start Page = Yahoo!
R1 -
HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Page_URL = http://www.yahoo.com
R1 -
HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Search_URL = Bing
R1 -
HKLMSoftwareMicrosoftInternet ExplorerMain,Search Page = Bing
R0 -
HKLMSoftwareMicrosoftInternet ExplorerMain,Start Page = http://www.yahoo.com
R0 -
HKLMSoftwareMicrosoftInternet ExplorerSearch,SearchAssistant =
R0 -
HKLMSoftwareMicrosoftInternet ExplorerSearch,CustomizeSearch =
R0 -
HKLMSoftwareMicrosoftInternet ExplorerMain,Local Page =
R1 -
HKCUSoftwareMicrosoftWindowsCurrentVersionInternet Settings,ProxyServer =
210.32.200.95:80
R1 - HKCUSoftwareMicrosoftWindowsCurrentVersionInternet
Settings,ProxyOverride = *.local
R0 - HKCUSoftwareMicrosoftInternet
ExplorerToolbar,LinksFolderName =
F2 - REG:system.ini:
UserInit=userinit.exe
O2 - BHO: &Yahoo! Toolbar Helper -
{02478D38-C3F9-4efb-9B51-7695ECA05670} - C:Program Files
(x86)Yahoo!CompanionInstallscpn0yt.dll
O2 - BHO: AcroIEHelperStub -
{18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:Program Files (x86)Common
FilesAdobeAcrobatActiveXAcroIEHelperShim.dll
O2 - BHO: RealPlayer
Download and Record Plugin for Internet Explorer -
{3049C3E9-B461-4BC5-8870-4C09146192CA} -
C:ProgramDataRealRealPlayerBrowserRecordPluginIErpbrowserrecordplugin
.dll
O2 - BHO: WormRadar.com IESiteBlocker.NavFilter -
{3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - C:Program Files
(x86)AVGAVG2012avgssie.dll
O2 - BHO: ZoneAlarm Security Engine Registrar -
{8A4A36C2-0535-4D2C-BD3D-496CB7EED6E3} - C:Program
FilesCheckPointZAForceFieldWOW64TrustCheckerbinTrustCheckerIEPlugin.d
ll
O2 - BHO: Windows Live ID Sign-in Helper -
{9030D464-4C02-4ABF-8ECC-5164760863C6} - C:Program Files (x86)Common
FilesMicrosoft SharedWindows LiveWindowsLiveLogin.dll
O2 - BHO: AVG
Security Toolbar - {95B7759C-8C7F-4BF1-B163-73684A933233} - C:Program Files
(x86)AVG Secure Search10.2.0.3AVG Secure Search_toolbar.dll
O2 - BHO:
Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} -
C:Program Files (x86)Javajre6binjp2ssv.dll
O3 - Toolbar: (no name) -
{CCC7A320-B3CA-4199-B1A6-9F516DD69829} - (no file)
O3 - Toolbar: AVG Security
Toolbar - {95B7759C-8C7F-4BF1-B163-73684A933233} - C:Program Files (x86)AVG
Secure Search10.2.0.3AVG Secure Search_toolbar.dll
O3 - Toolbar: ZoneAlarm
Security Engine - {EE2AC4E5-B0B0-4EC6-88A9-BCA1A32AB107} - C:Program
FilesCheckPointZAForceFieldWOW64TrustCheckerbinTrustCheckerIEPlugin.d
ll
O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} -
C:Program Files (x86)Yahoo!CompanionInstallscpn0yt.dll
O4 -
HKLM..Run: [IAStorIcon] C:Program Files (x86)IntelIntel(R) Rapid Storage
TechnologyIAStorIcon.exe
O4 - HKLM..Run: [AVG_TRAY] "C:Program Files
(x86)AVGAVG2012avgtray.exe"
O4 - HKLM..Run: [Adobe ARM] "C:Program
Files (x86)Common FilesAdobeARM1.0AdobeARM.exe"
O4 - HKLM..Run:
[ZoneAlarm] "C:Program Files (x86)CheckPointZoneAlarmzatray.exe"
O4 -
HKLM..Run: [SunJavaUpdateSched] "C:Program Files (x86)Common FilesJavaJava
Updatejusched.exe"
O4 - HKLM..Run: [vProt] "C:Program Files (x86)AVG
Secure Searchvprot.exe"
O4 - HKLM..Run: [Ad-Aware Antivirus] "C:Program
Files (x86)Ad-Aware AntivirusAdAwareLauncher" --windows-run
O4 -
HKLM..Run: [Ad-Aware Browsing Protection] "C:ProgramDataAd-Aware Browsing
Protectionadawarebp.exe"
O4 - HKLM..Run: [TkBellExe] "C:Program Files
(x86)RealRealPlayerUpdaterealsched.exe" -osboot
O4 - HKLM..RunOnce:
[InnoSetupRegFile.0000000001] "C:windowsis-FE1O4.exe" /REG /REGSVRMODE
O4 -
HKLM..RunOnce: [Malwarebytes Anti-Malware] C:Program Files
(x86)Malwarebytes' Anti-Malwarembamgui.exe /install /silent
O4 -
HKCU..Run: [Sidebar] C:Program FilesWindows Sidebarsidebar.exe
/autoRun
O4 - HKCU..Run: [cdloader]
"C:Usersuser2AppDataRoamingmjusbspcdloader2.exe" MAGICJACK
O4 -
HKCU..Run: [Messenger (Yahoo!)]
"C:PROGRA~2Yahoo!MESSEN~1YahooMessenger.exe" -quiet
O4 -
HKUSS-1-5-19..Run: [Sidebar] %ProgramFiles%Windows SidebarSidebar.exe
/autoRun (User 'LOCAL SERVICE')
O4 - HKUSS-1-5-19..RunOnce: [mctadmin]
C:WindowsSystem32mctadmin.exe (User 'LOCAL SERVICE')
O4 -
HKUSS-1-5-20..Run: [Sidebar] %ProgramFiles%Windows SidebarSidebar.exe
/autoRun (User 'NETWORK SERVICE')
O4 - HKUSS-1-5-20..RunOnce: [mctadmin]
C:WindowsSystem32mctadmin.exe (User 'NETWORK SERVICE')
O4 - Startup:
OpenOffice.org 3.3.lnk = C:Program Files (x86)OpenOffice.org
3programquickstart.exe
O8 - Extra context menu item: E&xport to
Microsoft Excel - res://C:PROGRA~2MIF5BA~1Office12EXCEL.EXE/3000
O8 -
Extra context menu item: Google Sidewiki... - res://C:Program Files
(x86)GoogleGoogle
ToolbarComponentGoogleToolbarDynamic_mui_en_96D6FF0C6D236BF8.dll/cmsidewiki.html
O8
- Extra context menu item: Search Image on TinEye - file://C:Usersuser2DocumentsTinEye 1.0TinEye.js
O9 -
Extra button: @C:Program Files (x86)Windows
LiveWriterWindowsLiveWriterShortcuts.dll,-1004 -
{219C3416-8CB2-491a-A3C7-D9FCDDC9D600} - C:Program Files (x86)Windows
LiveWriterWriterBrowserExtension.dll
O9 - Extra 'Tools' menuitem:
@C:Program Files (x86)Windows LiveWriterWindowsLiveWriterShortcuts.dll,-1003
- {219C3416-8CB2-491a-A3C7-D9FCDDC9D600} - C:Program Files (x86)Windows
LiveWriterWriterBrowserExtension.dll
O9 - Extra button: Send to OneNote -
{2670000A-7350-4f3c-8081-5663EE0C6C49} -
C:PROGRA~2MIF5BA~1Office12ONBttnIE.dll
O9 - Extra 'Tools' menuitem:
S&end to OneNote - {2670000A-7350-4f3c-8081-5663EE0C6C49} -
C:PROGRA~2MIF5BA~1Office12ONBttnIE.dll
O9 - Extra button: Research -
{92780B25-18CC-41C8-B9BE-3C9C571A8263} -
C:PROGRA~2MIF5BA~1Office12REFIEBAR.DLL
O10 - Unknown file in Winsock LSP:
c:program files (x86)common filesmicrosoft sharedwindows
livewlidnsp.dll
O10 - Unknown file in Winsock LSP: c:program files
(x86)common filesmicrosoft sharedwindows livewlidnsp.dll
O11 - Options
group: [ACCELERATED_GRAPHICS] Accelerated graphics
O12 - Plugin for .fpx:
C:Program Files (x86)Internet ExplorerPLUGINSNPRVRT34.dll
O12 - Plugin
for .ivr: C:Program Files (x86)Internet ExplorerPLUGINSNPRVRT34.dll
O13 -
Gopher Prefix:
O15 - Trusted Zone: my.magicjack.com
O15 - Trusted Zone:
reg.talk4free.com
O16 - DPF: {10000000-1000-1000-1000-100000000000} - http://cdn.betteradvertising.com/gho...l/ghostery.cab
O16 -
DPF: {3F0EECCE-E138-11D1-8712-0060083D83F5} (LPViewer Class) - http://www.iseemedia.com/downloads/a.../LPControl.cab
O16 -
DPF: {C1FDEE68-98D5-4F42-A4DD-D0BECF5077EB} (EPUImageControl Class) - http://tools.ebayimg.com/eps/wl/acti..._v1-0-31-0.cab
O16 -
DPF: {D27CDB6E-AE6D-11CF-96B8-444553540000} (Shockwave Flash Object) - http://fpdownload2.macromedia.com/ge...sh/swflash.cab
O16 -
DPF: {E06E2E99-0AA1-11D4-ABA6-0060082AA75C} (GpcContainer Class) - https://alliantevents.webex.com/clie...r/ieatgpc1.cab
O16 -
DPF: {E2883E8F-472F-4FB0-9522-AC9BF37916A7} (get_atlcom Class) - http://platformdl.adobe.com/NOS/getPlusPlus/1.6/gp.cab
O18
- Protocol: linkscanner - {F274614C-63F8-47D5-A4D1-FBDDE494F8D1} - C:Program
Files (x86)AVGAVG2012avgpp.dll
O18 - Protocol: skype4com -
{FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} -
C:PROGRA~2COMMON~1SkypeSKYPE4~1.DLL
O18 - Protocol: viprotocol -
{B658800C-F66E-4EF3-AB85-6C0C227862A9} - C:Program Files (x86)Common FilesAVG
Secure SearchViProtocolInstaller10.2.0ViProtocol.dll
O18 - Protocol: wlpg
- {E43EF6CD-A37A-4A9B-9E6F-83F89B8E6324} - C:Program Files (x86)Windows
LivePhoto GalleryAlbumDownloadProtocolHandler.dll
O23 - Service: Adobe
Acrobat Update Service (AdobeARMservice) - Adobe Systems Incorporated -
C:Program Files (x86)Common FilesAdobeARM1.0armsvc.exe
O23 - Service:
Adobe Flash Player Update Service (AdobeFlashPlayerUpdateSvc) - Adobe Systems
Incorporated -
C:windowsSysWOW64MacromedFlashFlashPlayerUpdateService.exe
O23 -
Service: @%SystemRoot%system32Alg.exe,-112 (ALG) - Unknown owner -
C:windowsSystem32alg.exe (file missing)
O23 - Service: AVGIDSAgent - AVG
Technologies CZ, s.r.o. - C:Program Files
(x86)AVGAVG2012AVGIDSAgent.exe
O23 - Service: AVG WatchDog (avgwd) - AVG
Technologies CZ, s.r.o. - C:Program Files (x86)AVGAVG2012avgwdsvc.exe
O23
- Service: ConfigFree WiMAX Service (cfWiMAXService) - TOSHIBA CORPORATION -
C:Program Files (x86)TOSHIBAConfigFreeCFIWmxSvcs64.exe
O23 - Service:
ConfigFree Service - TOSHIBA CORPORATION - C:Program Files
(x86)TOSHIBAConfigFreeCFSvcs.exe
O23 - Service:
@%SystemRoot%system32efssvc.dll,-100 (EFS) - Unknown owner -
C:windowsSystem32lsass.exe (file missing)
O23 - Service: Intel(R) Rapid
Storage Technology (IAStorDataMgrSvc) - Intel Corporation - C:Program Files
(x86)IntelIntel(R) Rapid Storage TechnologyIAStorDataMgrSvc.exe
O23 -
Service: ZoneAlarm Toolbar IswSvc (IswSvc) - Check Point Software Technologies -
C:Program FilesCheckPointZAForceFieldIswSvc.exe
O23 - Service:
@keyiso.dll,-100 (KeyIso) - Unknown owner - C:windowssystem32lsass.exe (file
missing)
O23 - Service: Intel(R) Management and Security Application Local
Management Service (LMS) - Intel Corporation - C:Program Files
(x86)IntelIntel(R) Management Engine ComponentsLMSLMS.exe
O23 - Service:
@comres.dll,-2797 (MSDTC) - Unknown owner - C:windowsSystem32msdtc.exe (file
missing)
O23 - Service: @%SystemRoot%System32netlogon.dll,-102 (Netlogon) -
Unknown owner - C:windowssystem32lsass.exe (file missing)
O23 - Service:
@%systemroot%system32psbase.dll,-300 (ProtectedStorage) - Unknown owner -
C:windowssystem32lsass.exe (file missing)
O23 - Service:
@%systemroot%system32Locator.exe,-2 (RpcLocator) - Unknown owner -
C:windowssystem32locator.exe (file missing)
O23 - Service:
@%SystemRoot%system32samsrv.dll,-1 (SamSs) - Unknown owner -
C:windowssystem32lsass.exe (file missing)
O23 - Service: Sunbelt VIPRE
Antivirus Service (SBAMSvc) - Sunbelt Software - C:Program Files (x86)Ad-Aware
AntivirusEngineSBAMSvc.exe
O23 - Service:
@%SystemRoot%system32snmptrap.exe,-3 (SNMPTRAP) - Unknown owner -
C:windowsSystem32snmptrap.exe (file missing)
O23 - Service:
@%systemroot%system32spoolsv.exe,-1 (Spooler) - Unknown owner -
C:windowsSystem32spoolsv.exe (file missing)
O23 - Service:
@%SystemRoot%system32sppsvc.exe,-101 (sppsvc) - Unknown owner -
C:windowssystem32sppsvc.exe (file missing)
O23 - Service: TOSHIBA HDD
Protection (Thpsrv) - Unknown owner - C:windowssystem32ThpSrv.exe (file
missing)
O23 - Service: TMachInfo - TOSHIBA Corporation - C:Program Files
(x86)TOSHIBATOSHIBA Service StationTMachInfo.exe
O23 - Service: TOSHIBA
Optical Disc Drive Service (TODDSrv) - Unknown owner -
C:Windowssystem32TODDSrv.exe (file missing)
O23 - Service: TOSHIBA Power
Saver (TosCoSrv) - TOSHIBA Corporation - C:Program FilesTOSHIBAPower
SaverTosCoSrv.exe
O23 - Service: TOSHIBA eco Utility Service - TOSHIBA
Corporation - C:Program FilesTOSHIBATECOTecoService.exe
O23 - Service:
TOSHIBA HDD SSD Alert Service - TOSHIBA Corporation - C:Program
FilesTOSHIBATOSHIBA HDD SSD AlertTosSmartSrv.exe
O23 - Service: TPCH
Service (TPCHSrv) - TOSHIBA Corporation - C:Program
FilesTOSHIBATPHMTPCHSrv.exe
O23 - Service:
@%SystemRoot%system32ui0detect.exe,-101 (UI0Detect) - Unknown owner -
C:windowssystem32UI0Detect.exe (file missing)
O23 - Service: Intel(R)
Management & Security Application User Notification Service (UNS) - Intel
Corporation - C:Program Files (x86)IntelIntel(R) Management Engine
ComponentsUNSUNS.exe
O23 - Service:
@%SystemRoot%system32vaultsvc.dll,-1003 (VaultSvc) - Unknown owner -
C:windowssystem32lsass.exe (file missing)
O23 - Service:
@%SystemRoot%system32vds.exe,-100 (vds) - Unknown owner -
C:windowsSystem32vds.exe (file missing)
O23 - Service: TrueVector Internet
Monitor (vsmon) - Check Point Software Technologies LTD - C:Program Files
(x86)CheckPointZoneAlarmvsmon.exe
O23 - Service:
@%systemroot%system32vssvc.exe,-102 (VSS) - Unknown owner -
C:windowssystem32vssvc.exe (file missing)
O23 - Service:
@%SystemRoot%system32WatWatUX.exe,-601 (WatAdminSvc) - Unknown owner -
C:windowssystem32WatWatAdminSvc.exe (file missing)
O23 - Service:
@%systemroot%system32wbengine.exe,-104 (wbengine) - Unknown owner -
C:windowssystem32wbengine.exe (file missing)
O23 - Service:
@%Systemroot%system32wbemwmiapsrv.exe,-110 (wmiApSrv) - Unknown owner -
C:windowssystem32wbemWmiApSrv.exe (file missing)
O23 - Service:
@%PROGRAMFILES%Windows Media Playerwmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown
owner - C:Program Files (x86)Windows Media Playerwmpnetwk.exe (file
missing)
--
End of file - 15087 bytes




I've a customer who has the same problem and I've waiting
to see if someone replied to this post for a fix. The
customer had a trojan removed from their PC and then
started receiving the same message whenever they tried to
run a dos program. When I started the machine in safe
mode everything worked fine. Today the PWSteal.Banker.B
trojan was reported by norton's on this computer which I
removed. This trojan was only discovered on June 17 and
is not supposed to affect XP. I decided to try running
command.com and sysedit to see if removing the trojan had
any effect on this problem. Much too my surprise and
relief it did. Hopefully this might help you if you go to
symantec's sight they have the information needed to
remove the virus. The file that the virus creates is
lsd_f3.dll in the system32 folder. Let me know if this
helps.

-----Original Message-----
I apologize for the lengthy post.

System:
I'm running win xp pro (system came with win xp, I
upgraded immediately to
win xp pro. This current problem has nothing to do with
the upgrade to win
xp pro, which was done over a year ago) on an e-machine
T2625 AMD Athlon xp
2600+ 2.12GHz, 1GB RAM.
Note: My computer came with the primary partition
(system partition, C:
drive) configured to NTFS. All other partitions that I
have created on that
physical hard drive and on other physical hard drives
are FAT32.

Problem:
A week ago, I had just finished fully cleaning my system
(a long process)
and then went to play tetris and BAM! A new problem. How
nice. I have a
number of dos programs, including tetris.exe, some old
astronomy dos
software, etc. which have worked fine on win xp pro for
quite some time
until recently (the last week) when they collectively
began to fail with an
"attempt to access invalid address" error. I cannot
ascertain the exact time
at which this problem began since I only use the DOS
programs infrequently.

Information which may be helpful:
The first thing I did was Google search with the
following string: "attempt
to access invalid address" xp dos.
This search brought some (perhaps) useful info, which I
will relay he

From:
http://www.computing.net/windows2000...d/forum/58304.
html
"Andrew" on June 02, 2004 said "Todays morning, after
one hour of work I
needed to restart computer becouse I was not able to
disconnect from
internet. There was no activity but it was not
disconnecting. After that I
can't start any DOS program on this computer, any dclick
in icon to program
is giving error: "Attempt to access invalid address".
When I try to run DOS
program from command prompt window I see : "Cannot
execute program". I scan
comp. for viruses - it did not find anything. Any sug.? "

"Bill Mason" on June 08, 2004 said "I currently have a
similar problem to
what you descibed. I found that if I start Windows in
the "safe" mode I can
then access what I need to. This is not a satisfactory
solution for me. I
would greatly appreciate any better cures if you are now
aware of any.
Thanks! "

"Christopher" on June 15, 2004 said "Same symptoms, XP
Pro. User reported a
few xxx popups while downloading NAV2004 just prior to
problem. Checked her
index.dat file and found NO record of browsing anything
but okay sites.
Tried NAV2004, Adaware, Spybot, TrojanHunter, turning
off servies, msconfig,
logged in as Administrator, checked config.nt and
autoexec.nt, nothing
worked. Finally had to use XP system restore and roll
back 3 days. Maybe
something nailed the Environment Variables ? Didn't
think to check those
until after restore. "

"manu (by manu24)" on June 30, 2004 said "same prob.
here with win xp home,
but sometime back i turned off my system restore for
some reason and forget
to turned it on, so now i cannot roll back, so what do
now? any suggestions.
manu "

end of thread

from: http://www.techimo.com/forum/t111831.html
"akinsey " on June 7th, 2004 said " I have a user who is
running XP Home on
a newer HP Pavilion, which had a bad hard drive and was
replaced a week ago
under warranty at Best Buy. She cannot use any DOS
programs under XP, even
using any of the available compatibility modes. HOWEVER,
there was no
problem with ANY DOS programs running under XP prior to
the drive being
replaced.
1) MS KB searches on DOS Compatibility Problems in XP
point to NTVDM
configuration problems. I.E.:
When you have problems with MS-DOS programs:
Test the NTVDM (Windows Virtual DOS Machine) subsystem:
1. Start / Run / Command.com / OK.
2. If a C:WindowsSystem32Command.com session does NOT
open, the NTVDM is
misconfigured. Check the Config.nt and Autoexec.nt files
in the
%SystemRoot%System32 folder for non-standard entries...
[snip]

Start-run-command.com (enter) yields the error "attempt
to access invalid
address". (see attachment, error.JPG)
command.com
Ntio.sys
Ntdos.sys
Ntvdm.exe
Ntvdmd.dll
Redir.exe
All appear in the windowssystem32 folder. I looked at
the config.nt and
autoexec.nt files and they're pure, exactly as extracted
from the XP cd.
Suggestions?"

"Paladisious" on July 1st, 2004 said "The exact same
thing is happening to
me in Win XP Home, except I formated my machine, and
since then I've
reinstalled windows and all those lovely classic DOS
games, but that
'invalid adress' error keeps coming up when I try to run
them."

"noseBleeD " on July 1st, 2004 said "I am fairly sure
when it says the
address is invalid, it means it has gone beyond the end
of the memory
registers that are assigned to the program you are
trying to run.
Does this happen in safe mode?
This could be caused by a memory leak.
This could be caused by a bad virus that harmed your
hdd, and ram, or video
ram, or more.
I would verify the above posts like you said concerning
the winXp version
first, then try safe mode and see if problem still exist.
I would then boot into recovery console and run
chkdsk /f command.
I would the test memory with other known good memory and
if good, add more."

end of thread

From:
http://www.annoyances.org/exec/forum/win2000/1087416706

"fcoen " on June 16, 2004 said "I have recently re-
installed windows 2000
server, but now all the dos programs that used to work
on it give an error:
"attempt to access invalid address". Not only that but
things like the edit
command give the same error. Any suggestions. Thanks. "

"MaddMaxx" on June 16, 2004 said "Did you switch from
FAT32 to NTFS?"

"fcoen " on June 17, 2004 said "yes..."

end of thread

From:
http://www.experts-
exchange.com/Operating_Systems/WinXP/Q_21020181.html

"stevewdindas" on 06/09/2004 said "I have notebook that
has had and repaired
a number of viruses. However, even though it is
reporting clean after
several different scans whenever I try to run most .exe
applications it
reports the error "Attempt to access invalid address".
I have tried the
programme in safe mode and it works. Any suggestions?"

end of thread

From:
http://computing.net/windows2000/www...rum/58739.html
"manu (by manu24)" on July 01, 2004 said "Hi, my comp
got hijacked with some
xxx dialer n dl.html file etc and some trojans. i got
rid of those now i m
facing this problem when ever i click some dos
application like my turbo
c++.exe or some other dos application i got this
error"Attempt to access
invalid address". unfortunately some time back i turned
off my system
restore so i m unable to rool back my system. plz help
me, ne suggestion
will br g8tly appreciated. Manu using win xp"

end of thread.

The most useful fact which I gathered from these threads
is that this is a
recent problem (Note the dates of the posts), since I
have tried many other
searches on Google, other search engines, and usenet
groups such as this and
found no other references to this problem. Therefore the
only references to
this problem are recent. This indicates to me that we
are dealing with a
virus, trojan, or malware which has began to show its
effects only in the
last month or so. Further evidence for this being a
recent virus is that
none of the above referenced threads includes any
definite answers or
solutions, just people trying to find answers to
(roughly) the same problem
at (roughly) the same time, indicating (to me) that this
is a new virus or a
new version of an old one.

MY Hijackthis log is clean:
"Logfile of HijackThis v1.97.7
Scan saved at 9:15:56 AM, on 7/2/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSsystem32spoolsv.exe
C:WINDOWSExplorer.EXE
C:Program FilesStop-the-Pop-Up Litestopthepop.exe
C:Program FilesAVPersonalAVGNT.EXE
C:WINDOWSSystem32RUNDLL32.EXE
C:WINDOWSSystem32ctfmon.exe
C:Program FilesAVPersonalAVGUARD.EXE
C:Program FilesAVPersonalAVWUPSRV.EXE
C:PROGRA~1SymantecNORTON~1GHOSTS~2.EXE
C:Program FilesAheadInCDInCDsrv.exe
C:Program FilesCommon FilesMicrosoft
SharedVS7Debugmdm.exe
C:Program FilesNorton UtilitiesNPROTECT.EXE
C:WINDOWSSystem32nvsvc32.exe
C:WINDOWSsystem32slserv.exe
C:Program FilesSpeed Disknopdb.exe
C:Program FilesInternet Exploreriexplore.exe
C:Program FilesOutlook Expressmsimn.exe
C:Program FilesHijackThisHijackThis.exe

R1 - HKCUSoftwareMicrosoftInternet
ExplorerMain,Start Page_bak =
about:blank
O4 - HKLM..Run: [NvCplDaemon] RUNDLL32.EXE
C:WINDOWSSystem32NvCpl.dll,NvStartup
O4 - HKLM..Run: [NeroCheck] C:WINDOWSsystem32
NeroCheck.exe
O4 - HKLM..Run: [sureshotpopupkiller] "C:Program
FilesStop-the-Pop-Up
Litestopthepop.exe" -minimized
O4 - HKLM..Run: [AVGCtrl] C:Program
FilesAVPersonalAVGNT.EXE /min
O4 - HKCU..Run: [NvMediaCenter] RUNDLL32.EXE
C:WINDOWSSystem32NVMCTRAY.DLL,NvTaskbarInit
O4 - HKCU..Run: [ctfmon.exe] C:WINDOWSSystem32
ctfmon.exe
O8 - Extra context menu item: &Define -
C:WINDOWSWebERS_DEF.HTM
O8 - Extra context menu item: &Search the Web -
C:WINDOWSWebERS_SRC.HTM
O8 - Extra context menu item: E&xport to Microsoft
Excel -
res://C:PROGRA~1MICROS~3Office10EXCEL.EXE/3000
O8 - Extra context menu item: Look Up in &Encyclopedia -
C:WINDOWSWebERS_ENC.HTM
O16 - DPF: {74D05D43-3236-11D4-BDCD-00C04F9A3B61}
(HouseCall Control) -
http://a840.g.akamai.net/7/840/537/2...01/housecall.t
rendmicro.com/house
call/xscan53.cab
O16 - DPF: {9A9307A0-7DA4-4DAF-B042-5009F29E09E1}
(ActiveScan Installer
Class) -
http://www.pandasoftware.com/activescan/as5/asinst.cab
O16 - DPF: {A3009861-330C-4E10-822B-39D16EC8829D}
(CRAVOnline Object) -
http://www.ravantivirus.com/scan/ravonline.cab"

I have already performed all of the usual tasks
associated with a difficult
problem:
1. Ran online panda-antivirus, trend micro, ranta-
antivirus, downloaded and
ran free AVG antivirus, then uninstalled it, and then
downloaded and ran
free AntiVir. Ran all of these again in safe mode except
for AVG free, which
doesn't like winXP safe mode and can't find core driver.
That's nine virus
scans which found nothing (due to the fact that, just
prior to noticing the
current problem, I had just run all of these scans and
more as part of
monthly maintenance).

2. In safe mode, and then again in regular mode, deleted
all files in the
following directories: Temporary Internet Files (for all
users, verifying it
to be empty, verifying that Content.IE5 was either empty
or deleted, for
each user and Admin and 'All usuers' and 'default user'
and localservices
and networkservices); Cookies; Windows/Temp;
Windows/Downloaded program
files (except for those downloaded program files
associated with the online
virus scanners); windows/prefetch; Windows/web;
C:recycler (except for
S-1-5-21-760979014-647424850-2722162428-1005, the actual
recycle bin, which
it won't let me delete); and then ran accessories|system
tools|disk cleanup
on all drives, in both regular and safe mode, deleting
everything which I
could (but everything was empty by then - in, fact,
everything had already
been empty because I had already done all of this just
prior to noticing the
problem).

3. Ran SpyBot search and destroy and Ad-Aware in regular
and safe mode.
Already clean.

Some things of note:
1. Since my primary partition (system c: drive) came as
NTFS, I have never
been able to access it directly when in DOS mode or when
booted from a DOS
floppy, since DOS can't recognize NTFS, so recently,
having finally grown
annoyed enough to do something about it, I searched the
net and downloaded
'ntfsdos', a DOS program which acts as a file system
driver for DOS/Windows
and that is able to recognize and mount NTFS drives for
transparent access.
It makes NTFS drives appear indistinguishable from
standard FAT drives,
providing the ability to navigate, view and execute
programs on them from
DOS. It is an older program which was apparently
necessary in the days when
FAt32 windows couldn't recognize NTFS. I mention this
merely for the sake of
completeness, since none of the other people in the
above referenced threads
mentioned this ntfsdos program, which is a relatively
rare program, and it
is unlikely that it would be present on any of their
systems, and therefore
unrelated to the present problem. However, one post
asked if the person had
changed from FAT32 to NTFS, but didn't explain why he
thought this might be
important, and although I didn't change from FAT32 to
NTFS, I just thought
I'd mention that I ran this NTFSDOS program so as to be
able to access NTFS
C: drive from DOS.

2. As suggested in one of the above-mentioned posts, I
ran Command.com, but
got the error "attempt to access invalid address". All
the usual dos
programs and associated files are present in system32
folder, and config.nt
and autoexec.nt appear to be fine.

3. My DOs stuff works fine in safe mode.

4. I don't seem to have the recovery console, or at
least I don't see it
listed when booting.

5. A month ago when last cleaning the system, I turned
off system restore
before running the virus scans, as always, but forgot to
turn it back on, so
if I want to restore windows I'll have to go back at
least a month. I'd
rather avoid that.

Sorry for the long post.
Any help is appreciated.

.




Strange behavior for last 10 days. Flash movies will not play any more on web sites and when I right click an image Windows tries to download it as a bmp file only!
I've tried to reinstall Flash from the Macromedia site and the site just sits there with no download occuring.

Microsoft support gave me the following advice and none of it works. Can you help?
(I apologize for pasting all of the below, but thought you might want to read the thread)
___________________

As I understand, when you used the Save Picture As option for a graphic file in Internet Explorer, you were only allowed to save the file as an Untitled.BMP file. We shall be working together through the course of this request to resolve this specific issue for you. If I have misunderstood your concerns, please feel free to let me know.

Based on my research, this issue may occur if your Temporary Internet pages cache is full, or it may be caused by some downloaded program files. To resolve this issue, try the following steps:

1. Open Internet Explorer, click Tools->Internet Options->General->Delete Files.

2. Click Ok to delete all the temporary Internet files.

3. Click Settings in the General pane; a window will open listing all the downloaded program files.

4. First try to remove any of these that have a status of "Unknown" or "Damaged".

5. If that doesn't work, remove other downloaded program files.
________

For Flash problems Microsoft suggest the following:

Dear Steve,

Thank you for your prompt update. I am sorry to hear that you could not complete our previous action plan due to the IE issue. According to my research, I believe it is best if we fix the IE issue first:

First, let's register the file urlmon.dll again:

Click Start Run, in the open line type this command and press Enter: regsvr32 urlmon.dll

If the problem still occurs, please try these steps:

Step 1: please uninstall and reinstall Internet Explorer.

1. Click Start and select Run.
2. Type command in the Open box and click OK.
3. In the MS-DOS prompt window, type the following command (exactly, do not even add a space) and press Enter:

rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 c:windowsinfie.inf

Note: I suppose the ie.inf file is stored in the c:windowsinf folder. The command is case sensitive. The "DefaultInstall" parameter is alterative.

4. After the re-installation, please restart the computer and check if the program is installed.

Step 2: If the problem remain, please reinstall VB Script and Java VM.

1. Go to http://www.microsoft.com/msdownload/.../scripting.asp
2. Download and install Scr55en.exe
3. Reboot the computer.
4. Go to http://www.microsoft.com/java/vm/dl_vm40.htm
5. Download and install VM Build 3802 for Windows 2000.
6. Reboot the computer and check if the problem still occurs.

Step 3: If the problem continues, let us try to perform a clean boot. This tool will help us identify any drivers or programs that may be interfering with the normal operation of your computer.

1. Click Start > Run, in the open line type in: msconfig
2. Choose Selective Startup and remove the check before "Load
startup group items"
3. Apply the change and reboot the system.
4. Check if the problem still occurs.

Please complete all the steps above and let me know how everything is going. I am standing by for your progress.

Have a nice day!

Best regards,
Johnny Hong
Support Professional
Microsoft Certified Systems Engineer
Microsoft Windows Online Support
mailto:Johnnyh@microsoft.com

Satisfied customers are my top priority.
Please let my manager or me know what you think of the level of service provided. You can send feedback to Microsoft Management at mailto:managers@microsoft.com?body=Jin
Zhou?subject=GTEC_Windows_Feedback or directly to my manager, Jin Zhou at mailto:jinzhou@microsoft.com

-----Original Message-----
From: Steve Laube [mailto:stevelaube@msn.com]
Sent: Tuesday, November 06, 2001 2:13 AM
To: Johnny Hong
Subject: RE: SRZ011103001344 "Flash player from Macromedia..."

Johnny,

Thank you for the attempt. I tried both methods and neither made a difference. It won't even download the software from the Macromedia site!

I have also discovered that a right-click "save as" on a picture from a web site is malfunctioning. The system tries to save it as "untitled.bmp". It no longer recognizes the original file name or extension.

Very odd and very frustrating.

Could they be related?

Steve Laube

-----Original Message-----
From: Johnny Hong [mailto:johnnyh@microsoft.com]
Sent: Saturday, November 03, 2001 9:06 PM
To: stevelaube@msn.com
Subject: SRZ011103001344 "Flash player from Macromedia..."

Dear Steve,

Thank you for contacting Microsoft Windows Online Support Team. My name is Johnny and I am the engineer who will be working with you on this service request.

As I understand the issue is: The Macromedia Flash Player does not work normally on Windows XP. If I have misunderstood your concern, please let me know.

Before we go any further, I would appreciate your help in providing more details of the problem's symptoms.

Based on my experience, most likely, the problem is caused by urlmon.dll is not registered correctly. Please register this file again.

Click Start Run, in the open line type this command and press Enter: regsvr32 urlmon.dll

If the problem still occurs, please try these steps:

Step 1: Please check the Internet Explorer the settings.

1. Open Internet Explorer and go to Tools > Internet Options.
2. On the General tab, delete the temporary files and cookies.
3. On the Security tab, set the Internet Zone security level to
Medium.
4. Apply the changes.

Step 2: Download and reinstall Macromedia Flash Palyer from Macromedia website. For your convenience, I have included the link as below:

http://www.macromedia.com/shockwave/downlo..._Prod_Version=S
hockwaveFlash

Please complete all the steps above and let me know how everything is going at your earliest convenience. I appreciate your time and look forward to your progress.

Thank you for choosing Microsoft.

Best regards,
Johnny Hong
Support Professional
Microsoft Certified Systems Engineer
Microsoft Windows Online Support
mailto:Johnnyh@microsoft.com

Satisfied customers are my top priority.
Please let my manager or me know what you think of the level of service provided. You can send feedback to Microsoft Management at mailto:managers@microsoft.com?body=Jin
Zhou?subject=GTEC_Windows_Feedback
or directly to my manager, Jin Zhou at mailto:jinzhou@microsoft.com




Hello!

I need some help to solve this problem...

I getting random BSOD when playing games.

My SPECS:

ASUS M4A89GTD PRO/USB3
8GB DDR3 1333mhz CORSAIR XMS3 (2 modules)
AMD PHENON II x6 1100T
2x Seagete 500GB barracuda on RAID 0 running Windows 7 Ultimate 64 bits SP1.
2x SAMSUNG 250gb
520W CORSAIR HX PSU
ATI RADEON 6950 2GB

The most common game crashing is BF3

CPU-Z Validator 3.1

Plz, someone can help me?

Thx and srry for my bad english Attached Files riroxi_bsod.rar (388.4 KB, 14 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 x64 Ultimate
OS Service Pack SP1
Internet Explorer Version I dont use lol
CPU Type and Speed Phenon II 1100T 3.3ghz
CPU Cooling Cooler Master Hyper 101
System Memory Type DDR3
System Memory Speed 1333mhz
Video Card Type and Speed RADEON 6950 2GB
Video Card Cooling SAPPHIRE
Power Supply Unit (PSU) Corsair HX 520w
Computer Skill Level Self-Taught Expert
Favorite Game BF3
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 01-26-2012 #2 AceInfinity Member Computer Mainstream Pro  
Join Date Aug 2011 Posts 46 Re: Random BSOD - While PC is in Heavy use Problem here is definitely calling functions trying to cross over and an interrupt request can't be handled in that event. Everything I see is pointing towards the NT kernel itself as the culprit though, so not much there.

I see one big problem here, and a notorious one for BSOD's
Code: fffff880`08df6000 fffff880`08dfe000 ASACPI ASACPI.sys Sun Mar 27 20:30:36 2005 (42476C4C) You want versions 2009 or later for ASACPI.sys - versions earlier than this (2005) are known BSOD causes

You can choose to disable the Asus ATK0110 ACPI Utility in DeviceManager (under System Devices) with no apparent problems, or update the driver.

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Download is under Utilities as the ATK0110 driver

1) Download the driver and extract it to a folder.
2) Open the Device Manager.
3) Right click the device you wish to change the drivers for. You can select Properties > Driver > Driver Details to check you have the right device. In this case System Devices >> ATK0110 ACPI Utility
4) Choose Update Driver Software.
5) Select Browse My Computer For Driver Software.
6) Select "Let me pick from a list of device drivers on my computer".
7) Select "Have disk"
8) Select "Browse"
9) Navigate to the extracted folder and double click on the .inf file
10) Hit OK, then Next and the driver(s) will then begin to install.
11) After it has installed, GoTo C:WindowsSystem32Drivers. Locate the Asacpi.sys driver, right click it and check the dates under its properties. You're looking for a "Modified" date which should be at least 2009 or later.

If this issue continues afterwards, i'll get you to run Driver Verifier

Driver Verifier: Note make sure you backup your data first
If you have access to another computer you can contact us through your other working system in case any problems prevent you from getting into Windows. Make a System Restore point as well.

A startup repair disk may assist you in a system restore during boot if you can't get into Windows as well. In Windows 7 you can make a Startup Repair disk by going to Start - All Programs - Maintenance - "Create a System Repair Disc". With Windows Vista you'll have to use your installation CD/DVD or the "Repair your computer" option in the F8/Safe mode boot menu

Follow these steps:
- Go to Start and type in "verifier.exe" and press Enter
- Select "Create custom settings for code developers" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
- Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Note: If Norton Antivirus is installed, do not enable Driver Verifier's Deadlock Detection

Reboot the system and wait for it to crash to the BSOD. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then make sure to let it run for at least 48 hours.

Reboot into Windows after the crash once again and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, or by opening a command prompt and typing in: "verifier /reset" without the quotes. If for some reason you can't get into Windows after the crash and reboot, try booting up in Safe Mode, then try these options to disable Driver Verifier from there.

If you can't get into Windows because it crashes too soon, it is recommended to try it in Safe Mode or boot from Last Known Good Configuration.
If you can't get into Safe Mode, try using System Restore from your installation DVD or startup repair menu to set the system back to the previous restore point that you created.

Make sure your minidumps are enabled so Driver Verifier can output one to the location for you, and post it so I can review it.




Hello, I signed up for the beta and was able to get a key for 32 bit version of windows 7 beta very exiting, Recently I purchased a new computer, ordered everything before feburary 10th, but wasnt able to get it togeather after some hardware issues. I have a considerable amount more ram and as I said would like to use the x64 bit version, have the doors closed on me despite having signed up for the 32 bit version?

I've got a valid key from a friend who also signed up and decided not to use it. My problem is this: it there anyway to get a valid copy of the x64 Beta software I've been able to get a 64 bit key where do I download the software.

There must be an option to re download the software, for this issue or for what ever reason need to re download the software, HDD failure, or whatnot.

~0urselfish

all copies of the 7 beta x64 release - are null?
Cant find it anywhere--

Torrents are reaching 99.9
Ive got a registered copy of the 32bit if anyone is interesting in trading.
or trying it out. Any information you can supply on the process, I know enrollment to the Windows Feedback Program is currently closed.

I'm going to post this anyway, then check out the supported ram for the x86 version.

http://windows7forums.com/

A download just finished!! after over 24 hours!
a little patience goes a long way, my dvds arrived today also W000t So for next whenever ill be installing win7 wish me luck.

So i guess uTorrent downloads the last few kb of a file very slowly, even though the file says complete its still downloading at like 1.2 k i burned a few dvds @ 1x speed with cdburnerxp there is a corrupted file on the system, yet there are no ..part files left on the drive, Another file finished downloading, then my xp system crashed, the system is hanging during chkdisk, so im gonna have to download and burn the os from my laptop. aaarg That means that both files which were potentially useful, I no longer have access to, unless for a miracle happens and the chkdisk finishes.

Im getting other odd issues, my second core is working extremely hard while the others sit nearly idle at about 2-3 percent, this leads the the second core, and GUI to lock up, i can slam alt+clr+del and open task manager and the system pops back automatically, after a few have been open, other issues include the system shutting down at random moments. I'm assuming that this is because I have 8, yes 8 GB of ram installed and its just to much for the os to process.

Got xxp running using the boot disk. sigh...

im going to re extract and burn the bottom image again, ill post again:
*if you have any suggestions or explainations.
heres an image of utorrent ddownloading completed files:

Same error as the last ISO error at x80070570
http://forums.techarena.in/operating-sy ... ost4254213

What do "you" think?

Quote:
Windows 7 Beta 64-bit Product Key

You may use the following product key to activate your evaluation copy of Windows 7 Beta 64-bit.

Product key: *****-*****-*****-*****-*****

Please print this page for your records.

We're sorry, but downloads are no longer available. Here are the Installation Instructions, Release Notes, and FAQ.

NOTICE ABOUT THE H.264/AVC VISUAL STANDARD. This software includes H.264/MPEG-4 AVC visual compression technology. MPEG LA, L.L.C. requires this notice:
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERICAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C SEE HTTP://WWW.MPEGLA.COM

Anyone willing to post a copy of WIN7 X64 SOFTWARE, MUCH much, much, much, much, much, much, much, much, much, much, much, ABLIGED. Exploring Windows: Special Beta Edition
Dear Beta Participant:

Thank you for joining us on our shared journey to Windowsร‚ยฎ 7. The work we've done is largely based on the feedback we've gotten from you before and throughout the development process. We rely on beta testers, like you, to help refine the product before it's commercially released. If you haven't already installed the Beta, we want you to! Please refer to the Installation Instructions to get started.

As you test drive the Windows 7 Beta, we hope you'll see:
-
It's faster and easier to do the things you do every day through simplified navigation, easier connections to networks and devices you are using, and enabling better online experiences
-
Your PC works the way you want it to with faster boot-up and shut-down, better personalization, and more sensible tools for managing your PC
-
Inspiring new things you want to try, like more intuitive ways to interact with your PC and easy ways to share media across PCs in the same house

Additional Windows 7 content can also be found on the Windows 7 website.

While the Beta automatically reports crashes and bugs to Microsoftร‚ยฎ over the Internet, we also invite you to participate in the Windows 7 Beta online forums, or to send feedback to us through the built-in Feedback tool.

We'll check back with you in about 10 days with more information about the Beta. To get more general information on Windows, make sure you're subscribed to the Exploring Windows newsletter. Thanks again for your investment in Windows 7.




Hi,

When i run sfc/scannow now in my computer i get an error as the some files cannot be repaired please help to delete or repair the file. (attached reports and snap shot)

Regards
Trojan Attached Thumbnails   Attached Files CBS.zip (528.8 KB, 29 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Ultimate 64 Bit
Computer Type Desktop
OS Service Pack Service Pack 1
Internet Explorer Version IE 9
Hard Drive 500 GB
Modem-Router Type Dlink ADSL N300 U 2750
Network Speed 512 Kbps
Anti-virus Software Kaspersky 2012
Computer Skill Level Limited Knowledge
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 08-01-2012 #2 Saltgrass Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Just trying to help  
Join Date Oct 2009 Posts 6,555 Re: Repair or delete iassdo.dll.mui If you check the link, it will go through how to repair a system using information obtained with the SFC. But on the site it refers to this command:

findstr /c:"[SR]" %windir%LogsCBSCBS.log >%userprofile%Desktopsfcdetails.txt

You can open an administrative command prompt, copy this command and paste it into the command window using the right click option, and it will create the SFCdetails.txt on your desktop.

The link shows how to look for the problem files so you can try to replace them. I do have the file you mention on my system.

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

I will look at your CBS.log to see what files may be involved.




System Spec:
Intel Core i5-3570k
Asus P8Z77-Pro M/b
16GB DDR3 1600MHz RAM (2x8)
2x2TB 7200RPM, 64MB cache HDD's
1x500GB 7200RPM HDD
nVidia GeForce 8800GTS
Creative SoundBlaster Xtreme Gamer sound card
Linksys WMP600N wireless PCI card
Corsair HX650 PSU
1x Blu-Ray optical drive
1x DVD optical drive

This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS on my 2x2TB HDDs.

I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD issues. There are two which have occured:

0x0000001a - MEMORY_MANAGEMENT
0x00000050 - PAGE_FAULT_IN_NON_PAGED_AREA

I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers.

I have followed the BSOD posting instructions and also googled effortlessly regarding these Stop codes. I just can't make sense of it I'm afraid.

SFDiag.zip and Screens & HTML Report.zip attached, should contain requested/required files and data. If you need any more information I'll be happy to help!

Thanks in advance - your help is greatly appreciated!

Ben Attached Files SFDiag.zip (575.1 KB, 63 views) Screens & HTML Report.zip (400.7 KB, 64 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Ultimate x64
Computer Type Custom built desktop
OS Service Pack SP1
Internet Explorer Version 9
DirectX Version 11
CPU Type and Speed i5-3570k 3.4GHz
CPU Cooling Arctic Cooling Freezer i30
CPU Idle Temp Average 35
CPU Load Temp Average 55
Motherboard Chipset Intel Z77
System BIOS Revision 1504
System Memory Type DDR3
System Memory Speed 1600MHz
Video Card Type and Speed nVidia GeForce 8800GTS
Video Card Cooling Fan on video card
Video Card Temperature Unknown
Video 3DMark Score Unknown
Power Supply Unit (PSU) Corsair HX650 (650W)
Computer Monitor BenQ E2200HD
Sound Card Creative SoundBlaster Xtreme Gamer
Speakers Creative
Headset/Microphone N/A
Hard Drive 2x2TB (7200RPM, 64MB Cache), 1x500GB (7200RPM)
Optical Drives 1x Blu-Ray Writer, 1x DVD writer
Keyboard and Mouse K/b - logitech, mouse - microsoft
Modem-Router Type N/A
Network Adapter Linksys WMP200N PCI
Printer N/A
Network Speed Fast
Computer Skill Level Self-Taught Expert
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 08-19-2012 #2 Trouble Administrator Noob Whisperer  
Join Date Nov 2009 Posts 5,926 Blog Entries2 Re: 0x0000001a & 0x00000050 - New Install/Build Take some time and clear up your network stack. True you are getting BSODs that might suggest memory issues but these can be related to drivers misbehaving.
First uninstall LogMeIn and Remote Anywhere
LMIRfsDriver.sys 7/14/2008
lmimirr.sys 4/10/2007
and
RaInfo.sys 1/4/2008
Then check here C:WindowsSystem32Drivers and confirm that those three files are no longer present. If they are simply rename them so that the file extension is changed from .sys to .OLD to break them and prevent them from loading for the time being.
Next update this driver
netr28x.sys 2/25/2009 I suspect it's the RT2860 driver from here Ralink-A MEDIATEK COMPANY
If Blue Screens persist attach any new dump files here.
If not see what LogMeIn and Remote Anywhere have in the way of something recent. So as not to add drivers that are four or five years old to your system.
DUMP:
Code: BugCheck 1A, {41287, 0, 0, 0} Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+6df ) MEMORY_MANAGEMENT (1a) # Any other values for parameter 1 must be individually examined. Arguments: Arg1: 0000000000041287, The subtype of the bugcheck. Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 BUGCHECK_STR: 0x1a_41287 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: NetSvcHelp.exe CURRENT_IRQL: 0 TRAP_FRAME: fffff88009c24a60 -- (.trap 0xfffff88009c24a60) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000000 rbx=0000000000000000 rcx=0000000fffffffff rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000 rip=fffff80002b2500d rsp=fffff88009c24bf0 rbp=fffff88009c24c70 r8=0000058000000000 r9=00000000ffffffff r10=0000000000000000 r11=fffff88003500180 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up di pl zr na po nc nt!KiDpcInterrupt+0x7d: fffff800`02b2500d fc cld Resetting default scope LAST_CONTROL_TRANSFER: from fffff80002a6a3be to fffff80002ada1c0 STACK_TEXT: fffff880`09c248f8 fffff800`02a6a3be : 00000000`0000001a 00000000`00041287 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx fffff880`09c24900 fffff800`02ad82ee : 00000000`00000001 00000000`00000000 fffff880`01a78100 fffffa80`000bea10 : nt! ?? ::FNODOBFM::`string'+0x45a45 fffff880`09c24a60 fffff800`02b2500d : fffffa80`000bea40 fffff880`09c24c70 fffff6fc`4000d618 ffffffff`ffffffff : nt!KiPageFault+0x16e fffff880`09c24bf0 fffff800`02aacfca : fffffa80`11879010 fffff880`01a9d438 fffffa80`0ffe0df0 fffff800`02c05fbd : nt!KiDpcInterrupt+0x7d fffff880`09c24d80 fffff800`02d90426 : 00000000`c0000000 fffff880`01a14300 00000000`00000000 fffff800`02d0c540 : nt!MiLockCode+0x12a fffff880`09c24eb0 fffff880`01a1a71e : fffffa80`115f21a0 fffffa80`11f5d4c0 fffffa80`115f21a0 00000000`00000000 : nt!MmLockPagableSectionByHandle+0x10e fffff880`09c24f00 fffff880`01a1acbc : fffffa80`15409b00 fffffa80`115f21a0 fffffa80`11f5d4c0 fffffa80`15409bf8 : ndis!ndisQuerySetMiniportEx+0x6e fffff880`09c24f70 fffff880`01a19409 : 006f0051`002d0036 00610050`00200053 00740065`006b0063 fffff880`09c253e8 : ndis!ndisIfGetMiniportStatistics+0x3bd fffff880`09c251a0 fffff880`01a19807 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ndis!ndisIfQueryObject+0x389 fffff880`09c25330 fffff880`01a18cad : fffffa80`11f61870 fffffa80`11f61870 fffff880`09c25410 00060000`00000000 : ndis!ndisNsiGetInterfaceRodInformation+0x207 fffff880`09c253d0 fffff880`01b0af36 : fffff880`01a79a50 fffffa80`15409000 00000000`00000001 fffffa80`13eccb00 : ndis!ndisNsiGetAllInterfaceInformation+0x42e fffff880`09c25490 fffff880`01616e29 : fffffa80`15409000 fffff8a0`00000070 fffffa80`0d7b1da0 fffff880`09c257d0 : NETIO!NsiEnumerateObjectsAllParametersEx+0x6df fffff880`09c25670 fffff880`016188e8 : fffffa80`0d7b1da0 fffffa80`0d7b1cd0 00000000`00000000 fffffa80`0d7b1d08 : nsiproxy!NsippEnumerateObjectsAllParameters+0x305 fffff880`09c25860 fffff880`016189db : fffffa80`113007f0 00000000`00000000 00000000`00000001 00000000`00000003 : nsiproxy!NsippDispatchDeviceControl+0x70 fffff880`09c258a0 fffff800`02df0717 : fffffa80`140d1a70 fffffa80`140d1a70 fffffa80`0d7b1de8 fffffa80`0d7b1cd0 : nsiproxy!NsippDispatch+0x4b fffff880`09c258d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x607 STACK_COMMAND: kb FOLLOWUP_IP: NETIO!NsiEnumerateObjectsAllParametersEx+6df fffff880`01b0af36 3d1a000080 cmp eax,8000001Ah SYMBOL_STACK_INDEX: b SYMBOL_NAME: NETIO!NsiEnumerateObjectsAllParametersEx+6df FOLLOWUP_NAME: MachineOwner MODULE_NAME: NETIO IMAGE_NAME: NETIO.SYS DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79381 FAILURE_BUCKET_ID: X64_0x1a_41287_NETIO!NsiEnumerateObjectsAllParametersEx+6df BUCKET_ID: X64_0x1a_41287_NETIO!NsiEnumerateObjectsAllParametersEx+6df




So im having this problem with my 3 weeks old computer. It just randomly crashes and all I can do at that point is hear the voice of skype/music etc. This has happened 5 times now, on the first 3 times the screen became orange, and this morning while I was starting to play LoL it became all grey and white striped. I restarted my computer and after 2 minutes the screen became green. I had to restart again. Then I changed my graphics to low and it didnt happen again (I dont know if the graphics change really did anything there). The strange thing imo is that I can still hear the voice and what ever was happening before the "crash" still continues. So I'm not sure if this even is a screen of death problem or is this just some problem with my monitor or something. Another strange thing is that after I built my new computer, my monitor cable only plugs on the video card, not on the DVI plugin on the motherboard.

So what do you guys think, am I having problems with my monitor or is it something worse?

I will still put all the information that was asked for bsod problems, just if you need it. And if this isnt a bsod problem then maybe someone can move this to the right place on the forums? Attached Thumbnails   Attached Files ms.nfo (1.36 MB, 22 views) WindowsUpdate.txt (1.08 MB, 59 views) DriverList.txt (19.1 KB, 20 views) DxDiag.txt (25.0 KB, 21 views) EventApp.txt (1.30 MB, 225 views) EventSys.txt (2.51 MB, 106 views) hosts.txt (824 Bytes, 21 views) RAMMon - SPD Info.txt (13.7 KB, 17 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System MS Windows 7 Ultimate 64-bit
Computer Type Desktop
OS Service Pack SP1
Internet Explorer Version 9
DirectX Version 11
CPU Type and Speed Intel Core i3 2100 @ 3.10GHz
CPU Cooling Default
CPU Idle Temp 35
Motherboard Chipset ASRock H61M/U3S3 (CPUSocket) Intel Sandy Bridge 09
System Memory Type DDR3
System Memory Clocking 20 clocks (?)
Video Card Type and Speed AMD Radeon HD 7800 Series
Power Supply Unit (PSU) Super Flower GOLDEN GREEN
Computer Monitor HP 2159 Widescreen LCD 21,5"
Headset/Microphone Logitech G35 Headset
Hard Drive Western Digital Caviar Blue 500 Mb SATA-III 6.0Gb/s
Optical Drives ATAPI iHAS124 C ATA Device
Keyboard and Mouse Razer Blackwidow Ultimate, Steelseries Sensei
Network Adapter Atheros AR8151 PCI-E Gigabit Ethernet Controller
Network Speed 10 mb/s
Anti-virus Software Avast
Favorite Game League of Legends
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 08-03-2012 #2 kemical Administrator Microsoft MVP  
Join Date Aug 2007 Posts 10,085 Re: Strange orange/green/greystriped screen (only hear voice) The grey green striping can come from a number of things: Bad drivers, Heat, overclocking and systems in need of updating call all cause this issue.

Your motherboard bios needs updating. Please download the latest version here: ASRock > Products > Motherboard > H61M/U3S3 > Download

As to where your monitor plugs in.. If your using an onboard GPU then it will use the connection your thinking of on the motherboard. Fitting a new card however over-rides this and the signal will now output from the card. You should check in the bios that everything is configured correctly although to be honest if it wasn't you wouldn't be seeing a picture..




I recently built a new PC running Win 7 64-bit, and have been plagued with BSODs that occur within five minutes of starting the computer. If they don't happen within five minutes, then the computer will run perfectly well until I have to restart or shut down for whatever reason. The errors are inconsistent. I've got several BAD_POOL_HEADERs and a couple MEMORY_MANAGEMENT, and a few others. I did run a single pass of Memtest, and found nothing. I'm worried that I've got bad memory, worst case. If it turns out to be drivers I've got no idea which ones could be the problem ones. All the info needed should be in the zipped file, and I've got system specs on my profile. Thank you! Attached Files Seven Forums.zip (1.02 MB, 39 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Professional 64-Bit
Computer Type Self-Built PC
OS Service Pack Service Pack 1
Internet Explorer Version 9.0.8112.16421
CPU Type and Speed Intel i5-3570K CPU @ 3.40 GHz
CPU Cooling Stock Fan
CPU Idle Temp 34C
Motherboard Chipset ASUS P8Z77-V
System BIOS Revision 0704 x64
System Memory Type DDR3
System Memory Speed 1333Hz
System Memory Clocking 9-9-9-24
Video Card Type and Speed NVIDIA GeForce GTX 670
Video Card Cooling Stock
Power Supply Unit (PSU) Seasonic 650W
Hard Drive WD Caviar Black 1TB
Optical Drives Crucial M4 128GB
Anti-virus Software ESET Antivirus 5
System Install Date 8/16/2012
Computer Skill Level Average Ability
Windows Experience Index 7.6
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 09-09-2012 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer  
Join Date Mar 2010 Posts 1,325 Re: BSODs shortly after startup. Run MemTest86+ for a minimum of 3 passes.

I ran 7 memory dumps
There were 5 different BSOD error codes cited
and 6 different causes blamed

This is most likely a hardware problem. They (hardware problems) are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- overclocking - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:
There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech Support Forum
29 May 2012 - The frequency of BSOD's with SSD's seems to have been decreasing over the last several months. It may be approaching time to re-evaluate my stand on their suitability for use in production systems. USB drivers are not installed - I suspect that they're your USB 3.0 drivers. Please visit the Asus website and download/install them.
Universal Serial Bus (USB) Controller PCIVEN_1B21&DEV_1042&SUBSYS_84881043&REV_004&3927C719&0&00E7 The drivers for this device are not installed. There's a 2007 driver from EnTech (se64a.sys) that could be causing your issues. It's related to several programs from EnTech and is used in their monitor information utilities (MonInfo, Monitor Asset Manager, etc). Which of these is related to any utilities that you may have installed? Their free software is located here: EnTech Taiwan If unable to identify the device, post back and we'll describe a safe way of removing this driver. Please post back if you are able to identify the program associated with this driver (so we can add it to the Driver Reference Table )

If the above stuff doesn't fix the BSOD problem, then we'll have to start looking at hardware causes. Please start with these free hardware diagnostics: Hardware Diagnostics

Analysis:The following is for information purposes only. Code: **************************Sat Sep 8 15:07:39.925 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__90812-2964-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:37.143 BugCheck Code: BugCheck 19, {20, fffffa800b29f000, fffffa800b29f250, 4250000} *** WARNING: Unable to verify timestamp for eamonm.sys *** ERROR: Module load completed but symbols could not be loaded for eamonm.sys Probably caused by :eamonm.sys ( eamonm+75e5 ) BugCheck Info: BAD_POOL_HEADER (19) BUGCHECK_STR: 0x19_20 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: firefox.exe FAILURE_BUCKET_ID: X64_0x19_20_eamonm+75e5 CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3410 BIOS Version 0704 BIOS Release Date 02/14/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Sep 8 14:51:07.315 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__90812-4352-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:01:17.549 BugCheck Code: BugCheck C5, {d8000d, 2, 0, fffff80002ff5a9b} *** WARNING: Unable to verify timestamp for eamonm.sys *** ERROR: Module load completed but symbols could not be loaded for eamonm.sys *** WARNING: Unable to verify checksum for win32k.sys Probably caused by :Pool_Corruption ( nt!ExDeferredFreePool+1df ) BugCheck Info: DRIVER_CORRUPTED_EXPOOL (c5) BUGCHECK_STR: 0xC5_2 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System FAILURE_BUCKET_ID: X64_0xC5_2_nt!ExDeferredFreePool+1df CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3410 BIOS Version 0704 BIOS Release Date 02/14/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Sep 8 14:48:47.519 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__90812-4290-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:26.737 BugCheck Code: BugCheck 1A, {41790, fffffa8004ffba80, ffff, 0} Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+355e4 ) BugCheck Info: MEMORY_MANAGEMENT (1a) BUGCHECK_STR: 0x1a_41790 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: WerFault.exe FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+355e4 CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3467 BIOS Version 0704 BIOS Release Date 02/14/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Sep 8 14:46:47.550 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__90812-4258-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:1 days 20:14:24.768 BugCheck Code: BugCheck 19, {20, fffffa800d2fda00, fffffa800d2fdc50, 4250005} *** WARNING: Unable to verify timestamp for eamonm.sys *** ERROR: Module load completed but symbols could not be loaded for eamonm.sys Probably caused by :eamonm.sys ( eamonm+75e5 ) BugCheck Info: BAD_POOL_HEADER (19) BUGCHECK_STR: 0x19_20 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: firefox.exe FAILURE_BUCKET_ID: X64_0x19_20_eamonm+75e5 CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3410 BIOS Version 0704 BIOS Release Date 02/14/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Sep 1 19:40:26.769 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__90112-8580-01.dmp] Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030 System Uptime:0 days 0:00:14.002 BugCheck Code: BugCheck 24, {1904fb, fffff88006525408, fffff88006524c60, fffff880016dc5e7} *** WARNING: Unable to verify checksum for win32k.sys Probably caused by :Ntfs.sys ( Ntfs!NtfsTeardownStructures+77 ) BugCheck Info: NTFS_FILE_SYSTEM (24) DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System BUGCHECK_STR: 0x24 FAILURE_BUCKET_ID: X64_0x24_Ntfs!NtfsTeardownStructures+77 CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3410 BIOS Version 0704 BIOS Release Date 02/14/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Sat Aug 18 23:50:47.258 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__81812-5803-01.dmp] Windows 7 Kernel Version 7600 MP (4 procs) Free x64 Built by: 7600.17017.amd64fre.win7_gdr.120503-2030 System Uptime:0 days 0:04:20.257 BugCheck Code: BugCheck 1A, {41790, fffffa80052e6e40, ffff, 0} Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+33486 ) BugCheck Info: MEMORY_MANAGEMENT (1a) BUGCHECK_STR: 0x1a_41790 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: WerFault.exe FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+33486 CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3410 BIOS Version 0704 BIOS Release Date 02/14/2012 Manufacturer System manufacturer Product Name System Product Name จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Aug 17 13:37:26.960 2012 (UTC - 4:00)************************** Loading Dump File [C:UsersJohn_jcgriff2_dbug__Kernel__81712-5772-01.dmp] Windows 7 Kernel Version 7600 MP (4 procs) Free x64 Built by: 7600.17017.amd64fre.win7_gdr.120503-2030 System Uptime:0 days 0:00:06.271 BugCheck Code: BugCheck A, {68005faf0a0, 2, 1, fffff80002ceeecf} Probably caused by :memory_corruption ( nt!MiReplenishPageSlist+100 ) BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a) DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT BUGCHECK_STR: 0xA PROCESS_NAME: System FAILURE_BUCKET_ID: X64_0xA_nt!MiReplenishPageSlist+100 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``

3rd Party Drivers:The following is for information purposes only. Any drivers in red should be updated. Code: **************************Sat Sep 8 15:07:39.925 2012 (UTC - 4:00)************************** se64a.sys Thu May 3 01:50:31 2007 (46397827) GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0) intelppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD) amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA) e1c62x64.sys Wed Jul 20 12:37:53 2011 (4E270461) LEqdUsb.Sys Fri Sep 2 02:22:56 2011 (4E607640) LHidEqd.Sys Fri Sep 2 02:22:59 2011 (4E607643) LHidFilt.Sys Fri Sep 2 02:23:09 2011 (4E60764D) LMouFilt.Sys Fri Sep 2 02:23:15 2011 (4E607653) athrx.sys Fri Oct 21 05:45:10 2011 (4EA13F26) HECIx64.sys Wed Nov 9 19:52:25 2011 (4EBB2049) iaStor.sys Tue Nov 29 22:39:19 2011 (4ED5A567) RTKVHD64.sys Tue Jan 3 05:51:09 2012 (4F02DD9D) iusb3hub.sys Thu Jan 5 06:54:43 2012 (4F058F83) iusb3xhc.sys Thu Jan 5 06:54:45 2012 (4F058F85) iusb3hcs.sys Thu Jan 5 06:56:40 2012 (4F058FF8) truecrypt.sys Tue Feb 7 04:09:36 2012 (4F30EA50) epfwwfpr.sys Wed Mar 7 09:28:53 2012 (4F5770A5) eamonm.sys Wed Mar 7 09:32:36 2012 (4F577184) ehdrv.sys Wed Mar 7 09:33:42 2012 (4F5771C6) nvhda64v.sys Wed Apr 18 13:07:54 2012 (4F8EF4EA) nvlddmkm.sys Tue May 15 03:35:36 2012 (4FB20748) SbieDrv.sys Sun Jun 17 03:51:48 2012 (4FDD8C94) จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` **************************Fri Aug 17 13:37:26.960 2012 (UTC - 4:00)************************** amdxata.sys Tue May 19 13:56:59 2009 (4A12F2EB) se64a.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed. This is the 2007 driver from EnTech that I discussed earlier.
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=intelppm.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=e1c62x64.sys
http://www.carrona.org/drivers/driver.php?id=LEqdUsb.Sys
http://www.carrona.org/drivers/driver.php?id=LHidEqd.Sys
http://www.carrona.org/drivers/driver.php?id=LHidFilt.Sys
http://www.carrona.org/drivers/driver.php?id=LMouFilt.Sys
http://www.carrona.org/drivers/driver.php?id=athrx.sys
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
http://www.carrona.org/drivers/driver.php?id=iaStor.sys
http://www.carrona.org/drivers/driver.php?id=RTKVHD64.sys
http://www.carrona.org/drivers/driver.php?id=iusb3hub.sys
http://www.carrona.org/drivers/driver.php?id=iusb3xhc.sys
http://www.carrona.org/drivers/driver.php?id=iusb3hcs.sys
http://www.carrona.org/drivers/driver.php?id=truecrypt.sys
http://www.carrona.org/drivers/driver.php?id=epfwwfpr.sys
http://www.carrona.org/drivers/driver.php?id=eamonm.sys
http://www.carrona.org/drivers/driver.php?id=ehdrv.sys
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=SbieDrv.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys




Hi! Thank you for reading this. Here's my problem:

Problem
I get errors when trying to install programs. They seem to relate to the temp folders.
I have 4 partitions on my HD: a system partition of 100mb, c: 110GB with windows and programs, D: 8Gb for virtual mem, E: 800+GB data.
When I instal from E: to C: or from a (virtual PowerIso) disk to C: i get install errors. So the big problem is, i can't install anything from a (virtual) disk. The small problem is, it's just not a perfect install. The other big problem is that it's a PC intended for my mother and I don't want her having any issues with it down the line.... which I then have to solve ;-)

Two examples:
installing Partition Wizard home edition 7, double click setup, popup error: Setup was unable to create the directory "C:UsersMarjaAppDataLocalTempis-RIVB.tmp". Error 5: Acces is denied.
Installing Crysis 2 (illegal) it starts with trying to install VC++ 2008 redis. and immediately there's an error: The installation package or a needed file could not be opened. Verify that the package exits and that you can access it.

When it doesn't happen
When I copy the Partition Wizard setup, or any setup files for that matter to C: it installs perfectly. So basically it only happens when not installing from C: and the setup wants to put data in the temp folder.

What may have caused it
I have moved some of the special folders. Downloads, my pictures, my videos, my music, my documents, saved games and desktop.

What i tried to fix it
System restore to first pointCheck temp folders, they are there TEMP and TMP. (C:UsersMarjaAppDataLocalTemp)I am logged onto the (only) administrator accountI run the setup as administratorI've run sfc /scannow twice. Fixed some stuff the 1st time, but did not solve the problem. Second time it was clean.Ran the ms utility form Diagnose and fix program installing and uninstalling problems automatically but it didn't find anythingRan windows repair from USB boot but that didn't find or fix anythingSwitched of Avast (only security program active in bckgrnd)Unmarked 'read only' (right click on folder) from the AppData folder and subfolders plus itemsAlso tried to follow the steps in this KB arctile but when I get to step 4 (shift r-click open elevated command window here) i get a pop up saying: "This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Program Control panel."
More info
I've attached some reports just to be on the safe side. DxDiag, Msinfo32 and CBS log

What to do?
A clean install is not an option at this point. So.... I don't know. Attached Files DxDiag.txt (33.3 KB, 49 views) msinfo32.txt (503.6 KB, 134 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 32bit
Computer Type Homebuild
OS Service Pack SP1
Internet Explorer Version 9
DirectX Version 11
CPU Type and Speed AMD Phenom II 4 965 (3,4Ghz)
Motherboard Chipset MB= Asus M5A78L-M/USB3
Video Card Type and Speed Sapphire 9650 2GB
Power Supply Unit (PSU) OCZ 500w
Sound Card Onboard
Hard Drive Samsung spinpoint 1TB
Optical Drives none
USB Controller 3.0 enabled
System Install Date october '11
Computer Skill Level Average Ability
Favorite Application FireFox
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 11-01-2011 #2 Ted Myers Senior Member Enjoys Windows 7 Forums  
Join Date Sep 2011 Posts 279 Re: Trouble installing software This seems to be a duplicate of another thread. There is an answer there.




Problem
When installing a program with a setup file from my data partition (E:) or a (virtual) disk to C: I get error codes indicating installer cannot create files in the temp folder.
When I then copy the setup file to anywhere on C: it runs and installs without any problem.

So I can't install software from a (virtual) disk.

What i did to cause this?
The only thing I can come up with is moving some of the special folders to the data disk; my documents, my music, my videos, my pictures, desktop, saved games and downloads. I did this by creating a folder, for example E:Desktop and then going to C:UsersMarja, r-click on Desktop folder and selecting Move... Then pointing to E:Desktop and included all files when moving.

Good to know:
- It installs windows updates without problems.
- Clean install is not an option
- Different errors occur for any setup.exe from any program and always indicate not being able to write/create data to temp folders. For example; "Error 5 Access denied", bla bla was not able to create temporary folder, NSIS errors.

What I tried:
Switched of Avast (only active security)Took ownership of the setup file and took ownership of the temp folders.Check if the Temp folders were set to the right location. They were. Though at the moment I can only find: C:UsersMarjaAppDataLocalTempLogged in on administrator account Marja.Ran the setups as administratorUAC is on lowest setting. No notifications.Ran SFC /Scannow twice. Found some issues first time, fixed them, didn't solve the problem. Second time no issues found.Ran repair from USB windows install 'disk'. Found no problems with windows.Went to temp folder and r-click removed the 'read only' mark from the folder and sub folders and files.
What to do?
[Blank]

Attached
DxDiag.txt Attached Files msinfo32.txt (503.6 KB, 88 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 32bit
Computer Type Homebuild
OS Service Pack SP1
Internet Explorer Version 9
DirectX Version 11
CPU Type and Speed AMD Phenom II 4 965 (3,4Ghz)
Motherboard Chipset MB= Asus M5A78L-M/USB3
Video Card Type and Speed Sapphire 9650 2GB
Power Supply Unit (PSU) OCZ 500w
Sound Card Onboard
Hard Drive Samsung spinpoint 1TB
Optical Drives none
USB Controller 3.0 enabled
System Install Date october '11
Computer Skill Level Average Ability
Favorite Application FireFox
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 11-01-2011 #2 Captain Jack Tier 2 Moderator Microsoft MVP - Windows Expert
(IT Pro)  
Join Date Mar 2010 Posts 959 Blog Entries1 Re: Installer issues? Temp folder issues? Try this article and see if it works Why do I get NSIS Error - NSIS also try the part using /NCRC command switch. But in my experience most of the installer should be local and recommend to be in local rather than virtual , cloud or network drive.




Hello, the last couple times I've sent my laptop to hibernate I have had driver power state failure BSODs. I usually have some programs like Chrome and Spotify open. I rarely shut down so I'm unsure if the problem is specifically related to hibernation.

I have attached minidumps and updated my profile info with hardware specs.

Any ideas? Thanks for help! Attached Files 052012-20451-01.dmp (1.02 MB, 31 views) 052112-18720-01.dmp (460.5 KB, 28 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Ultimate 64-bit
Computer Type Laptop
OS Service Pack 1
Internet Explorer Version 9
DirectX Version 11
CPU Type and Speed Intel Core 2 Duo 2.6GHz
CPU Cooling Heatsink, fan
CPU Idle Temp 45
System Memory Type DDR2
System Memory Speed 800MHz
Video Card Type and Speed GeForce GT 230M 1100MHz, GeForce 9100M G
Video Card Cooling Fan
Computer Monitor 1920 x 1080 LCD
Hard Drive 200GB HDD
Optical Drives DVD-RW
Anti-virus Software Avast
Productivity Suite Microsoft Office 2007
Computer Skill Level Self-Taught Expert
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 05-21-2012 #2 Trouble Administrator Noob Whisperer  
Join Date Nov 2009 Posts 5,926 Blog Entries2 Re: Driver Power State Failure crash Hello Alex and welcome to the forum.
Both your dump files are the same:
Code: BugCheck 1000009F, {4, 258, fffffa8004003040, fffff80004903510} Unable to load image VBoxNetFlt.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for VBoxNetFlt.sys *** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys Probably caused by : VBoxNetFlt.sys ( VBoxNetFlt+ac01 ) DRIVER_POWER_STATE_FAILURE (9f) A driver is causing an inconsistent power state. Arguments: Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp subsystem. Arg2: 0000000000000258, Timeout in seconds. Arg3: fffffa8004003040, The thread currently holding on to the Pnp lock. Arg4: fffff80004903510 DRVPOWERSTATE_SUBCODE: 4 FAULTING_THREAD: fffffa8004003040 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x9F PROCESS_NAME: System CURRENT_IRQL: 2 LAST_CONTROL_TRANSFER: from fffff8000328ec12 to fffff8000329c08a STACK_TEXT: fffff880`02fede00 fffff800`0328ec12 : fffffa80`04003040 fffffa80`04003040 00000000`00000000 00000000`00000000 : nt!KiSwapContext+0x7a fffff880`02fedf40 fffff800`0329ef92 : 00000000`ffffffff fffffa80`04003148 00000000`000000b4 fffff880`009e6180 : nt!KiCommitThreadWait+0x1d2 fffff880`02fedfd0 fffff880`0457bc01 : fffffa80`058e0bd8 fffff880`04577d9e 00000000`00000000 00000000`000000b4 : nt!KeDelayExecutionThread+0x186 fffff880`02fee040 fffffa80`058e0bd8 : fffff880`04577d9e 00000000`00000000 00000000`000000b4 fffff880`02fee070 : VBoxNetFlt+0xac01 fffff880`02fee048 fffff880`04577d9e : 00000000`00000000 00000000`000000b4 fffff880`02fee070 fffff880`04577d9a : 0xfffffa80`058e0bd8 fffff880`02fee050 00000000`00000000 : 00000000`000000b4 fffff880`02fee070 fffff880`04577d9a 00000000`00000000 : VBoxNetFlt+0x6d9e STACK_COMMAND: .thread 0xfffffa8004003040 ; kb FOLLOWUP_IP: VBoxNetFlt+ac01 fffff880`0457bc01 ?? ??? SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: VBoxNetFlt +ac01 FOLLOWUP_NAME: MachineOwner MODULE_NAME: VBoxNetFlt IMAGE_NAME: VBoxNetFlt.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4eef3187 FAILURE_BUCKET_ID: X64_0x9F_VBoxNetFlt+ac01 BUCKET_ID: X64_0x9F_VBoxNetFlt+ac01 I would test by uninstalling Virtual Box, check the C:WindowsSystem32Drivers folder to make sure that the uninstall removed the offending driver and test for a while and see if Blue Screens persist without it being present. If so attach new ones here in your thread.
Regards
Randy




These words below are mine.I created them,I wrote them.Even though Engel
uses them nearly everywhere.I just do not like somebody to copy and paste
them,to use them fully because these words are NOT created by him. I am angry.

I just post to everybody know and understand who these words belongs to.
They belongs to me...:-)

And a question :
Is there a way to stop and prevent him from coping these words fully ?!

MALWARE REMOVAL INSTRUCTIONS

Follow them carefully and step-by-step.
All cleaning actions should be done
without internet connection

1. Download the necessary software

@ SpyBot Search and Destroy
http://www.safer-networking.org/microsoft.en.html

@ Ad-Aware SE Personal
http://www.lavasoftusa.com/software/adaware

@ Microsoft Antispyware (only for genuie Windows versions)
http://www.microsoft.com/athome/secu...s/default.mspx

@ CWShredder
http://housecall.trendmicro.com

@ Antivirus software (if you still do not have)

Panda Titanium 2005
http://www.pandasoftware.com/microsoft

Specific
If you are non-XP user and still do not have firewall,
you should get free one from he
http://www.microsoft.com/athome/secu...s/default.mspx

Optional
There are some malwares that can destroy the internet connection
when you try to remove them.That's why you may get that program
that could restore your internet connection.
I haven't tried it but lots of people like them.

Win Sock XP Fix
http://www.spychecker.com/program/winsockxpfix.html

2. Create a back-up of all your critical information
This is just an option.
You should check it for viruses later.

3. Run a Firewall

Windows XP
has integrated firewall -
Internet Connection Firewall (ICF) for SP1 and
Windows Firewall (WF) for SP2

Windows versions different from XP
They do not have integrated firewall ,they have to use software firewall.

!!! Use only 1 firewall !!!

4. Windows Updates
Connect to internet and
download all the security updates - Critical updates with Express install.

Start - Windows Updates
or
http://windowsupdate.microsoft.com

5. Install and Update

SpyBot Search and Destroy
Ad-Aware SE Personal
Microsoft Antispyware
CWShredder

6. Delete all the Internet Explorer's temporary stuff

Start - Settings- Control Panel - Internet Options

There ,on the General Tab you will see where you can delete
internet temporary files
cookies
history
Delete them all.

7. Delete all Temporary files

| Windows XP users (all new versions) |

The path is :
C:Documents and SettingsUSERLocal SettingsTemp
Delete all files from this folder
and also
C:WindowsTemp

| Windows 98 users (all old versions) |

The path is :
C:WindowsTemp

8. Remove any unwanted programs

Boot in Safe Mode (see how below)
Then ,in Safe Mode, Start - Settings โ€“ Control Panel โ€“ Add /Remove programs
See if you have any unknown /unwanted software
installed- toolbars and/or known spy programs.
Remove them with the REMOVE button.
Also check for tracks of these programs in
C:Program files and delete,if any.
Then restart with booting in Normal Mode .

9. Run Disc Clean up

Start - Programs - Accessories - System Tools - Disc Cleanup

Make sure you have checked :
Downloaded program files
Temporary Internet files
Temporary files
Recycle bin
Web Client/Publisher content

10. Remove viruses /worms /trojan horses

@ Scan with Microsoft Windows Malicious Software removal tool

http://www.microsoft.com/malwareremove

@ Scan with

Panda Software free Active Scan,where you can check your
PC for ALL TYPES of security threats and clean viruses and worms

http://www.pandasoftware.com/product..._principal.htm

@ Install the antivirus software

Boot in Safe Mode and install the antivirus software
In Safe Mode,because there are viruses
that have the ability to damage an antivirus while installing it

How to boot your computer in Safe Mode

Do this by repeatedly typing F8 while Windows is starting before
Windows logo appears.
Then you'll open the BIOS menu where you can choose to boot
the hard drive in SAFE MODE

(If you are XP user ,find more about Safe Mode
in Help and Support Center ; Start-Help and Suport)

@ Update the antivirus and scan with it

Boot in Normal Mode and update it.
Make sure you have all functions ON
(scanning all files,heuristic,disinfect,scanning for other threats...)

Perform a full scan in Normal Mode first
Then boot in Safe Mode and also perform a scan

@ While still in Safe Mode,scan with these

SpyBot S&D
Ad-Aware SE Personal
Microsoft Antispyware
CWShredder

and remove the junk
!!! They must have already been updated !!!

When the scan is finished,
DO NOT restart ,if you have Win XP or ME

System Restore (for XP and ME only)

Because of the fact malware is a program,
System Restore also stores all malware tracks and when restarting,it can
replicate some infected system stuff and the malware will be back !!!
So you need to delete all the restore points before restarting :

Right click on My Computer-Properties-System Restore
Check Turn off system restore.Click OK

Restart the in Normal mode.

11. For better performance ,it is advisable to check your hard drives for
errors
Open My computer .
Then right click on the hard drive you want to check - Properties - Tools
In the error-checking area ,click "Check now" to start the process.

At the end (when the system is malware-free)
again Right click on My computer-Properties-System Restore
Uncheck Turn off system restore ,so you'll have your Restore function ON.

After these,your computer should be clean !
If you do not understand something,you can post again and ask for
information
If the instructions seems difficult to you,you can take your computer to
a computer store where IT specialist would help you wipe out the junk!
Don't be shame.

--- Useful pages ---

http://www.microsoft.com/athome/secu...s/default.mspx
different kinds of free or trial security software.

http://www.pandasoftware.com/about/r...ldren_internet
Because of the campaign "Children and the Internet"
Panda Software offers 90 day free trial version of one of the best security
software
Panda Platininum Internet Security 2005 awarded with many prizes

http://www.pandasoftware.com/protected/tips.htm ;
useful tips for protecting computers

http://www.pandasoftware.com/product..._principal.htm
Panda Software free Active Scan,where you can check your
PC for ALL TYPES of security threats and clean viruses and worms

http://housecall.trendmicro.com
Trend-Micro free online scanner HouseCall where you can scan for
Viruses and Spywares and clean them. CWShredder is also available here

http://www.kaspersky.com/virusscanner
Kaspersky free online scanner
and checker for suspicious files.If you have issues with suspicious
file,here is the right place!

http://www.f-prot.com/virusinfo/submission_form.html
Send F-prot AV suspicious files for fast analyze and and it is all for FREE

http://www.microsoft.com/malwareremove
Microsoft Windows Malware Removal Tool

http://www.microsoft.com/windowsxp/u...nfectedpc.mspx
Microsoft MVP Charlie Russel's article about Dealing with malware
Really good and detailed

http://support.microsoft.com
Free Microsoft support and suggestions (for genuie clients)

Now ,when you have cleaned your computer,you need to think about your
security!
Microsoft
suggests 3 + 1 general steps how to protect
your PC and the infomation stored on it,
your privacy and your family
1.Use an internet firewall
2.Enable Automatic Updates for your PC
3.Use an antivirus software
4.Use antispyware software

Goto http://www.microsoft.com/athome/security and learn more
Check the Security Essentials for your OS and also have a look at all
sections!

Panda_man
" Let's beat malware black and blue"
" No new epidemic of all kind of malware - Panda TruPrevent"

| SETTING UP A COMPUTER |

When you first turn on your computer
it is adviseable to first have a look at its setings.

** If you use Windows XP **

1 .Create as many computer accouts as you need

If your computer is going to be used from more than one person
(family members,friends,colleagues ,etc...) ,
make others limited users and you - Administrator
So that you'll have full control of the PC,but they would only be
able to change their files and few settings only !

If you are a parent and would like your children to access the internet,
create the limited user accounts.More about the parental control below

!!! Windows XP has hidden built-in administartor account
accessable and visible only in Safe Mode.
Get into Safe Mode and password protect it.
In Safe Mode,goto Control Panel -User accounts and click on the name
of that hidden account,called Administrator !!!

| How to boot your computer in Safe Mode |

Do this by repeatedly typing F8 while Windows is starting before
Windows logo appears.
Then you'll open the BIOS menu where you can choose to boot
the hard drive in SAFE MODE

(If you are XP user ,find more about Safe Mode
in Help and Support Center ; Start-Help and Suport)

2. Password-protect your account and your files

Make strong password,
with numbers,letters and at least one special character
Start - Settings - Control Panel - User accounts

When you decide to password protect your account,
after creting a password Windows should ask you if you want
to protect your files also.Click YES

or
Click on the folder you want to password-protect-Properties
Click on Sharing tab -Make this folder private

** All Windows Versions **

Start - Settings - Control Panel
or My computer -Control Panel

3. Have a look at

Display settings
Date and time Settings
Mouse and Keyboard settings
Power Options
Regional and language settings
Sound settings
Start Menu Settings

4. I do not recommend any user to install programs like

WinAmp ,Real Player
or WinZip (in Win XP )
Because of the fact Windows has integrated Windows Media Player ( 2 versions)
plus (Zip archiver in XP ) ,it is pointless to install such programs

5. Do install programs like

Adobe Reader / Acrobat because it is useful and with it
you can read PDF files which become more wide-spread everyday
http://www.adobe.com

6. If you do not have Microsoft Office

Download
1. Open Office
http://www.openoffice.org

2.Microsoft Word viewer / Excel viewer / Power Point viewer
http://www.microsoft.com ; ,click on Office

Open Office is free as well as Microsoft viewers.
Open Office is not as good as MS Office but would do the basics

| THINK ABOUT INTERNET |

1. After you go on-line,upgrade to the newest Service Pack available for
your OS .
http://windowsupdate.microsoft.com
Learn more about the SP in Microsoft web-site and read the preparation steps !

2. Also download all critical updates with Express install.

I recommend you to use only Internet Explorer as an internet browser
as well as Outlook Express for your mail program
Many people may think them as not as secure as other but that is not true.

| PARENTAL CONTROL |

Internet is useful for everybody and even for the children
They can search information for school project,listen to music,play on-line
games
and even talk to friends
But it is even dangerous
What I recommend is to talk to your child/children and to explain them about
the activities they don't have to do while online

Then,do not trust your children fully.Install a good software/s/ to help
protect your PC and your family's privacy

So....
1. Create your children limited user accounts in Windows XP

So they will have their own My documents folder
but will not be able to access PC settings
Limited users can download everything but cannot install anything
,so they cannot install any spyware/virus in the family's computer.

Children limited account should NOT be password-protected !!!

Parent administartor account should be password-protected !!!

2. Turn on Internet Explorer's Content Advisor

It would help your children not to open pornographic pages
and pages with bad content
Start- Settings - Control Panel - Internet Options - Content tab
and then enable it and check the settings

2.1 MSN toolbar
This toolbar become more useful everyday
It has either pop-up blocker and also Anti-Phising filter
Recently Microsoft had established this Anti-phishing filter
as an add-in for the Toolbar
http://toolbar.msn.com to get the toolbar
http://toolbar.msn.com ; click on Add-ins and search for the Anti-Phishing

Antiphishing would help to protect your family from online fraud

3. Microsoft has made a component to help protect a computer
that is used by many people.It prevents limited users from access to
^chosen by the admin user^ programs and files and also prevent them
from downloading files and other things
It is easy to use and can be configured to meet everybody's needs
It is called Share access tool

http://www.microsoft.com/windowsxp/s...ccess/faq.mspx

/example : A parent with Administrator rights can prevent a children
with limited account to use a chat program or download a new one /

4. When a child uses the internet ,
the computer should have an antivirus software ON + firewall always ON

http://www.pandasoftware.com/about/r...ldren_internet
Because of the campaign "Children and the Internet"
Panda Software offers 90 day free trial version of one of the best security
softwares
Panda Platininum Internet Security 2005

Please,go through the additional steps below.............

| PROTECT YOUR COMPUTER
AND THE INFORMATION STORED ON IT |

Microsoft suggest 3 +1 steps general steps to help protecting your
computer.Here they are plus some additional !

1. Firewall ON

It is very important to know that you REALLY SHOULD
use only one firewall (to prevent software conflict ) !!!

Firewall is a protective barrier between your PC and the outside world.
It protects you from hackers and other intruders from gaining
remote access to your PC and also from viruses and network worms (like
Sasser).
It also makes your PC invisiable for hacker softwares and
even if hackers find your PC it will block the attack.
Firewalls scans all your incoming (or outgoing) traffic and
immediately block it if it is unsolicated.

** Windows XP **

has integrated firewall -
Internet Connection Firewall (ICF) for SP1 and
Windows Firewall (WF) for SP2

Windows Firewall (for SP 2)
is full firewall ,suitable for all kind of users and connections.
Windows Firewall is designed especially for home users with
not very big computer literacy and that's why it works almost
automatically,asks rarely !

When using it,check the Exception list .
If you are home user and do not want to play network games,exchange files
over chat
or you are connected to internet via none/less secure server, you can check
" Don't allow exception "
This guarantees you maximum protection!

Start - Settings - Contol Panel - Windows Firewall .See its settings.

Users with no Service Pack or with SP 1 you should upgrade to SP 2
because ICF is partial firewall made for direct internet connection only

** Windows versions different from XP **

They do not have integrated firewall and they are not protected
from hackers and intruders,network viruses and etc.
They MUST use software firewall.So choose one firewall

You may get Zone Alarm personal (free) from :
http://www.zonelabs.com

2. Windows Updates ON

Windows Updates can protect your PC from different OS vulnerabilities and
security threats.

** Windows XP and ME **

| Critical updates |

Automatic Updates ON
Right click on My computer - Properties - Automatic Updates -
Download updates automatically but let me choose when to install them

** Different form XP and ME **

| Critical updates |

Automatic updates are not offered
Manually download critical updates
Start โ€“ Windows Update or http://windowsupdate.microsoft.com

** All Windows Versions **

| Optional updates |

Because of the fact Automatic updates downloads only critical updates (they
are the most important),
regularly visit http://windowsupdate.microsoft.com
and download some of the optional software and hardware updates available.

3. Virus Protection ON

Antivirus Software can protect you from viruses,worms,trojans and other
security threats

Always use the latest version of your program and update it at least every two days.
The more often you update it ,the higher protection for new threats you have.

Make sure it has real-time scanner which is enabled

Make sure all security settings are turned ON

(e.g. scanning All files,scanning compressed files,mail scanning,
disinfecting, heuristic scan,behaviour analyze
or detecting spyware,hacking tools, jokes and so onโ€ฆ..)

Use only 1 av software .More than one may cause your PC
problems because of the permanent protection ! ! !

Other : List with all Microsoft Anti-virus partners
http://www.microsoft.com/security/pa.../antivirus.asp

| PROTECT YOURSELF AND YOUR PRIVACY |

1. Spyware protection ON

Spybot Search & Destroy
http://www.safer-networking.org/microsoft.en.html

Ad-Aware SE Personal
http://www.lavasoftusa.com/software/adaware

Microsoft Antispyware
http://www.microsoft.com/athome/secu...s/default.mspx

These 3 programs(all free) are the most famous
in the world and ,of course,are the best.
Using two of them guarantees you very ,very good protection !

Microsoft Antispyware is the only one from these above that has
real-time protection,which is very important for dealing with spy junk

2. Manage your Internet Settings

Start-Settings-Contol Panel-Internet Options

| On the General tab |
Delete all temporary internet files,cookies,history ( often do this)

| On the Security tab |
Make sure the Internet level is Medium.Check other levels

| On the Privacy tab |
Make sure the level is Medium High.

| On the Content tab |
Goto Auto complete
Delete(clear) forms and passwords and check the settings

3. Use a pop-up blocker

Internet Explorer 6 with XP SP 2 has integrated pop-up blocker

However ,if you are not XP SP 2 user ,or you are without IE 6
get the Free MSN Tool Bar that has pop-up protection
http://toolbar.msn.com

3.1 MSN toolbar
This toolbar become more useful everyday
It has either pop-up blocker and also Anti-Phising filter
Recently Microsoft had established this Anti-phishing filter
as an add-in for the Toolbar
http://toolbar.msn.com to get the toolbar
http://toolbar.msn.com ; click on Add-ins and search for the Anti-Phishing

4. Other

4.1
( Depending on your mail program - this below is for Outlook Express )
Open Outlook Express
Tools - Options - Security
Make sure you have checked these:
` Warn me when...
` Do not allow...

4.2
Create free web-based mail
Lots of free web-based mail accounts exist.
You may create one in Hotmail , Yahoo , Gmail or Mail.RU

They are all for free with a lot of space and intergrated SPAM and Virus
protection
Yahoo.co.uk and Mail.ru offer free POP 3 / SMTP /HTML access
so you may use them with Outlook Express

4.3
Think first , then click !!!

Nothing can protect the computer from its user.
Even though you could have firewall,av software,
antispyware software and all updates downloaded,
you are not protected 100 %.NOTHING guarantees you 100 % protection.
So if you don't know what exactly to do and when to do it,you'll probably
fall a victim
of a virus , spyware or hacker.
You can find it ridiculous,but it is true! :-)

BE CAREFUL which sites you visit
BE EXTREMELY CAREFUL what you install,especially free or shareware software.
ALWAYS check everything you download from internet with AV and AS software.

4.4
Be aware of SPAM messages and especially PHISHING !!!
Spam messages are unsolicated mail.You really do not want them !
In most cases SPAM is just annoying,however PHISHING is a type of spam that
is
is really dangerous.Someone unknown sends you a messages,which is
trying to get personal information,such as bank account number
and passwords ! That's why :

NEVER give your email and/or passwords to strangers.
Don't post your mail or passwords in forums and chats.
NEVER read email messages from people you don't know. Just delete
them!!!
NEVER answer to strangers or even open the attachments,if any !!!
Delete the mail !
NEVER follow links in email from stranger and in mail that you
doubt and do not trust !

For more info about SPAM / Phishing visit
http://www.microsoft.com/athome/security ; - Email section

4.5
Regularly :
Run Disc clean-up (with all checked)
Start - Programs - Accessories - System Tools - Disc Clean-up

Check all hard drives for errors
Back-up all your information (at least montly)
Defragment all hard drives
Scan all your computer with antivirus and antispyware software
(should be twice a week)

--- Useful pages ---

http://www.microsoft.com/athome/secu...s/default.mspx
different kinds of free or trial security software.

http://www.pandasoftware.com/about/r...ldren_internet
Because of the campaign "Children and the Internet"
Panda Software offers 90 day free trial version of one of the best security
software
Panda Platininum Internet Security 2005 awarded with many prizes

http://www.pandasoftware.com/protected/tips.htm ;
useful tips for protecting computers

http://www.pandasoftware.com/product..._principal.htm
Panda Software free Active Scan,where you can check your
PC for ALL TYPES of security threats and clean viruses and worms

http://housecall.trendmicro.com
Trend-Micro free online scanner HouseCall where you can scan for
Viruses and Spywares and clean them. CWShredder is also available here

http://www.kaspersky.com/virusscanner
Kaspersky free online scanner
and checker for suspicious files.If you have issues with suspicious
file,here is the right place!

http://www.f-prot.com/virusinfo/submission_form.html
Send F-prot AV suspicious files for fast analyze and and it is all for FREE

http://www.microsoft.com/malwareremove
Microsoft Windows Malware Removal Tool

http://www.microsoft.com/windowsxp/u...nfectedpc.mspx
Microsoft MVP Charlie Russel's article about Dealing with malware
Really good and detailed

http://support.microsoft.com
Free Microsoft support and suggestions (for genuie clients)

Now ,when you have cleaned your computer,you need to think about your
security!
Microsoft
suggests 3 + 1 general steps how to protect
your PC and the infomation stored on it,
your privacy and your family
1.Use an internet firewall
2.Enable Automatic Updates for your PC
3.Use an antivirus software
4.Use antispyware software

Goto http://www.microsoft.com/athome/security and learn more
Check the Security Essentials for your OS and also have a look at all
sections!

Thanks very much !!!
Panda_man

" Let's beat malware black and blue "
" No new epidemic of all kind of malware - Panda TruPrevent "




This post is very long. Please read only if you are patient enough to help a
newbie. These questions mostly pertain to XP networking, and this seems the
best forum for networking. Referrals and suggestions are very welcome. Even
if you can answer just one or two of my many questions here, that will help
a lot. Just quote the text you are replying to so I know which question you
are answering. I get confused rather easily.

Before beginning the networking questions, in Belarc Advisor under
"Installed Microsoft Hotfixes," SP2 (KB811113) does not have a green
checkmark next to it (lacks the data to allow verification). Is that normal?
All updates after SP2 show up as SP3, and all of them do have green
checkmarks and are verified. Here is a synopsis.

BELARC ADVISOR 6.1f
---------------------------
Unmarked hotfixes lack the data to allow verification.
(C) marks a hotfix that verifies correctly.
(X) marks a hotfix that fails verification (failing hotfixes need to be
reinstalled)

Installed Microsoft Hotfixes
----------------------------
..NETFramework
1.1
S867460 on 3/8/2005 (details...)
M886903 on 3/8/2005 (details...)
DataAccess
Q832483 on 3/6/2005 (details...)
KB870669 (details...)
Internet Explorer 6
SP1
(C) KB867282-IE6SP1-20050127.163319 on 3/6/2005 (details...)
Internet Explorer
SP2 (SP2)
Outlook Express 6
SP1
(C) KB887797-OE6SP1-20041112.131144 on 3/6/2005 (details...)
Windows Media Player
(C) WM817787 (details...)
(C) Q828026 (details...)
Windows Media Player (continued)
SP0
(C) Q828026 on 3/6/2005 (details...)
Windows XP
SP2
KB811113[SP] on 3/8/2005 (details...)
SP3
(C) KB867282 on 3/8/2005 (details...)
(C) KB873333 on 3/8/2005 (details...)
(C) KB873339 on 3/8/2005 (details...)
(C) KB885250 on 3/8/2005 (details...)
(C) KB885835 on 3/8/2005 (details...)
(C) KB885836 on 3/8/2005 (details...)
(C) KB886185 on 3/8/2005 (details...)
(C) KB887472 on 3/8/2005 (details...)
(C) KB887742 on 3/8/2005 (details...)
(C) KB887797 on 3/12/2005 (details...)
(C) KB888113 on 3/8/2005 (details...)
(C) KB888240 on 3/13/2005 (details...)
(C) KB888302 on 3/8/2005 (details...)
(C) KB890047 on 3/8/2005 (details...)
(C) KB890175 on 3/8/2005 (details...)
(C) KB891781 on 3/8/2005 (details...)

In another area of Belarc, Local System accounts show "HelpAssistant" and
"SUPPORT_388945a0" as disabled accounts. Is that because I disabled Remote
Assistance and Remote Desktop in Control Panel - System - Remote? Could it
also be because I disabled Messenger from starting up with Windows?

Is this a good place to get help with what I need, or is there an online
forum for newbies you might recommend, because this could take a while. I
basically need instructions that an idiot could understand.

I will also need help determining which of the numerous Services that start
up in WinXP I need and which I do not. The MSCONFIG in XP sucks. I can't
maximize it, and there is hardly any information in either MSCONFIG or the
Task Manager under Services. Program names and paths are not mentioned, just
names of processes. How do they expect me to find anything? I need a good
third-party Startup Manager/Task Manager in one program that is not very
expensive. WinTasks Pro is too expensive. One option is the Ultimate
Troubleshooter, which is $25. I haven't it tried yet, but I am open to other
options. Their site has a list of Processes (Services). SysInfo has a list
of Startups. Spybot helps me to some extent with Startups but not Processes
or Services.

Startups
http://sysinfo.org/startuplist.php

Processes
http://www.liutilities.com/products/...rocesslibrary/
http://www.answersthatwork.com/Taskl...s/tasklist.htm

Some of those XP background processes might be what is causing my LAN to cut
out from time to time. When that happens I lose both Internet access and
network access. One of the network icons disappears from my taskbar. Other
times it doesn't, and when I click on it to "repair" it it freezes. When I
try to bring up "Network Connections" it freezes. A reboot brings everything
back to normal. Firewall, antivirus and antispyware are all up-to-date, full
system malware scans are run regularly, including online scans. I really
don't think malware is the problem. I think it's background processes in XP,
but I just don't know enough about them to mess with any of them. XP has
only been installed for a few days on both PCs. Both of us are new to it.

Please assistant with Network Setup and with Binding/Unbinding TCP/IP from
File and Printer Sharing for better security. I am the "network
administrator" of this home network but new to XP and not a techie or
certified expert. Many web sites and Microsoft articles about networking are
geared toward more advanced users, and I do not understand all that is in
them. Need step-by-step advice. Forgive me if too much information is below.
Better to have too much than not enough.

At present, only two XP Pro SP2 computers are connected, this one and one
other desktop. I do not know how to connect the Win95a and Win98se laptops
or if it is even possible since they use 16-bit PCMCIA to connect to the
ethernet hub. The XP network setup wizard does not support Win95. The old
laptops connected fine to the network when this computer and the other
desktop both used Windows Me.

With XP, it is all user-level rather than share-level access, and I don't
know how to configure Win9x for user-level access. Let's do that later after
we get things configured properly for the two XP machines. Also, I need to
password protect the shared folders, the access to each computer, and each
network printer. Can't see how to do that with XP. With 9x, it was easy to
password-protect a shared printer or a shared drive.

SBC Yahoo! DSL Technical Support and 2Wire Technical Support state that the
2Wire Home Portal 1000HW is both a DSL Modem and a Router. I do not know if
it is a gateway, but I suspect it is for three reasons: (1) Windows uses the
word "gateway" in the name for the connection, (2) Windows preselects the
"residential gateway" option in the network setup wizard, and (3) the 2wire
people say that I cannot connect a separate "residential gateway" to the
device.

NETWORK CONFIGURATION
------------------------
10BaseT Ethernet Network
One Workgroup, No Domain
4 Computers (only 3 can connect at a time)
This computer is the Network Administrator
This computer is XP Pro SP2 (3 local users)
DSL modem/router uses DNS/DHCP/NAT (functions as a gateway?)
DSL modem/router has a hardware firewall
DSL modem/router is wired to this PC by USB 2.0 (10Mbps)
DSL modem/router is wired to a 10BaseT 4-port ethernet hub (10Mbps)
Other computers connect to this PC and the Internet by ethernet hub
This computer has no cable directly to the hub (or there would be conflicts)
PCs CONNECTED: (1) XP Pro SP2 PC (same 3 local users)
PCs DISCONNECTED: (1) Win95a PC and (1) Win98se PC
FILE & PRINTER SHARING: Enabled
INTERNET cONNECTION SHARING: Disabled (incompatible with DHCP modem/router)
WINDOWS FIREWALL: Off (because ZoneAlarm firewall is On)
THIRD-PARTY FIREWALL: On (Zone Alarm Pro 5.5)
IP ADDRESSES: Obtained automatically by DHCP
BINDINGS: Default settings (insecure)

** Is my current network peer-to-peer or client/server? **

TRANSPORT PROTOCOL LAYER
---------------------------
Internet Protocol (TCP/IP)..............Properties available
Aegis Protocol (IEEE 802.1x) v2.3.1.9...Properties grayed out
NWLink IPX/SPX/NetBIOS Compatible Transport Protocol...Properties available
NWLink NetBIOS..........................Properties grayed out

All protocols were automatically installed and configured by Windows except
for IPX/SPX, which I added after reading that that protocol (or NetBEUI) is
the key to separating File and Printer Sharing from TCP/IP. I just don't
know how to do it. On the options for each network connection in XP, I see
nothing about bindings. In Win9x, the bindings options are easier to find.

HARDWARE ADAPTER LAYER
-------------------------
1394 Net Adapter
2Wire Gateway USB
MAC Bridge Miniport (Network Bridge)
Realtek RTL8139/810x Family Fast Ethernet NIC (Disabled)
HSP56 Micromodem (COM3) (56k Dial-up Fax Modem)

- Realtek is disabled, nothing is plugged into my ethernet port. A Z65n
network printer will go there later to replace my existing Z42 parallel port
printer. We don't have a cartridge for the Z65n. That's the only reason
we're not using it.

- The Network Bridge connects 1394 and Realtek, so that the new Z65n
printer, once installed, will be available to the existing network.

- The 1394 Net Adapter is used with my network and/or the Internet, but I am
not exactly how or what it does. Windows automatically configured it. The
1394 sounds like firewire, but I don't have any firewire devices installed.
Firewire is enabled on the mainboard, but I'm not using it. Or am I using it
through this adapter? Is this just an internal connection needed for Windows
to set up the Internet and the network? Windows needs at least two adapters
for that, according to the XP Help and Support.

** Which adapter is the one that connects to the Internet, 1394 or 2Wire? **

** Which adapter should be used for File & Printer Sharing? **

NETWORK SERVICES LAYER
-------------------------
Client for Microsoft Networks.....Properties available
File and Printer Sharing for Microsoft Networks...Properties grayed out
QoS Packet Scheduler..............Properties grayed out

NETWORK CONNECTIONS
----------------------
Network Bridge................Connected, 400Mbps
LAN (Realtek Ethernet)........Disabled, Bridged (nothing plugged in there
yet)
LAN (2Wire Gateway USB) DSL...Connected, 10Mbps
Dial-up Connection............Disabled (backup connection method)
1394 Connection...............Connected, 400Mbps, Bridged

- The Realtek Ethernet NIC is disabled at my choice because nothing is
plugged into that port. Since I'm already connected to the network via USB
(or 1394), I cannot also be connected to the hub or there would be
conflicts.

- I plan to connect an ethernet cable to my open ethernet port at some
point. The cable will go from my ethernet port directly to the ethernet port
of a Lexmark Z65n printer (when we get a print cartridge for it) without
going through the ethernet hub.

- When I re-enable that Realtek ethernet port for the Z65n printer, that
printer will automatically become part of the existing network through the
Network Bridge, theoretically.

- The dial-up connection is only used when the LAN is not available.

- When dialing in with the dial-up connection, TCP/IP completes the
connection successfully, but a connection to the remote computer cannot be
established with IPX/SPX (error 733). A dialog box asks me if I want to
"Accept" the connection as is and if I want to check the box "Do not
request the failed protocols next time". I click "Accept", but I'm afraid to
check the other box about failed protocols because I don't know how
difficult it will be to reverse that decision if things change.

- I wonder why the 2Wire Gateway USB connection is only 10Mbps (rather than
400Mbps) for USB 2.0, unless it's because the router connects to an ethernet
hub which can only support 10Mbps.

NETWORK SETUP WIZARD
-----------------------
Option #1: "This computer connects directly to the Internet. The other
computers on the network connect through this computer."
(This is the option I thought was correct, but Windows did not preselect
it.)

Option #2: "This computer connects to the Internet through a residential
gateway or through another computer on the network"
(This option came up by default in the network setup wizard when Windows
searched for a shared connection. Maybe this one is correct. This is the
option I am presently using on this computer.)

Option #3: "Other"
(This option is not used, but it was set up this way originally. At that
time, there was no USB cable between the router and my computer. My computer
was connected directly to the ethernet hub. Then we heard that the USB
direct connection method would be more secure, so we switched the wiring to
the current configuration as recommended by the 2Wire people and my ISP.)

QUESTIONS
------------
1. Which option for the network setup wizard (see 1, 2 or 3 above) is
correct for this computer?
2. Would option 2 be correct for all the other computers on the network?
That was used for the other XP machine.
3. Since the modem/router connects to my machine with USB, there is no power
to that USB connection when my computer is turned off, right?
4. So the other computers can't connect when my machine is turned off,
right?
5. Does my machine need to be turned on all the time in order for the others
to connect to the Internet?
6. Is my current network peer-to-peer or client/server?
7. Which adapter is the one that connects to the Internet, 1394 or 2Wire?
8. Which adapter should be used for File & Printer Sharing, 1394 or 2Wire?
9. Network Bindings need to be reconfigured to isolate File & Printer
Sharing from the Internet without losing my ability to connect either to the
Internet or to the other computers (and the other computers to me). I need
step-by-step instructions, not too technical.
10. Password protection needs to be added to each network printer and each
shared drive/folder. I need step-by-step instructions, not too technical.
11. The network access and Internet connection through are sometimes lost
for no apparent reason. Any idea why? Sometimes the 2Wire Gateway USB icon
disappears from the taskbar when this happens. When it doesn't disappear, I
can't right-click on it because it freezes. Sometimes Start -- Network
Connections will not open. I suspect it may be some background process
running in XP. The only way to get the connection back is to reboot the PC.
12. Remote Desktop and Remote assistance are both disabled. Do they need to
be enabled?

After the two XP machines are configured, I will need assistance setting up
the two Win9x laptops. Looking forward to hearing from the experts.




I don't know what to do...people keep suggesting MEMTEST which I've done so many times....there's NOT A PROBLEM with my memory! I'd have found out by now!

But I can't tell what's causing the problem and I'm getting sick of having so many Blue Screens! It can't be good for my computer. :/

Please help me stop the Blue Screens FOR GOOD. Attached Files W7F_01-12-2012.zip (2.83 MB, 11 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Professional 32-bit
Computer Type Custom
OS Service Pack 1
DirectX Version 10
CPU Type and Speed AMD Phenom II X4 925
Motherboard Chipset MSI NF750-G55 (MS-7578)
System Memory Type 4GB
Video Card Type and Speed NVIDIA GeForce 210
Power Supply Unit (PSU) Cooler Master 550W
Computer Monitor HP w1907
Sound Card Integrated
Speakers Logitech X540
Hard Drive 500GB WDC WD5000ADS-00S9B0
Optical Drives ATAPI DH20A4P
Keyboard and Mouse Microsoft
Network Adapter Realtek
Anti-virus Software AVG Free 9.5
Computer Skill Level Average Ability
Windows Experience Index 4.6
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 12-01-2012 #2 GeneralHiningII Senior Member Crobble-io  
Join Date Sep 2012 Posts 338 Blog Entries1 Re: Seemingly random pattern opf BSOD How long did you run memtest for?

There are problems with the following programs (according to Windows Error Reporting):
- iTunes (starting from the 23rd May 2012)
- Windows Media Player (Starting 24th September 2012) (I suggest using VLC instead of the default Windows Media Player, as the default one has been known to cause problems. VLC link: VideoLAN - Official page for VLC media player, the Open Source video framework!)
- Google Chrome (starting 12th April 2012)
- Skype (Starting 21st October 2012) (uninstall it or update to the latest version)
- AOL Instant Messager (Starting 11th November 2012) (uninstall it or update to the latest version)
- Many problems with Explorer.exe
This is the user shell, which we see as the familiar taskbar, desktop, and other user interface features.

- Many problems with svchost.exe (more on this later)
BEFORE CONTINUING:

- If you have overclocked any parts of your system, return them to stock speeds for now. Feel free to re-overclock once the problem is fixed.
- Uninstall any AntiVirus Softwares you have installed on your system, and use http://windows.microsoft.com/en-US/windows/security-essentials-download for now. Feel free to reinstall your old AntiVirus Software once the problem is fixed.
(Note: Make sure to only have one AntiVirus installed on your system at any time)
- Update all of the programs listed in Control Panel (Root: Start > Control Panel > Programs and Features > Uninstall a program)
- Disconnect any external device that is not required (External Hard Drives, Chargers, Headphones etc.) Code: Debug session time: Sun Dec 2 10:57:20.836 2012 (UTC + 11:00) Loading Dump File [C:UsersMZSysnativeBSODApps120112-43437-01.dmp] Built by: 7601.17944.x86fre.win7sp1_gdr.120830-0333 System Uptime: 0 days 0:45:05.606 Bugcheck code 0000004E Arguments: Arg1: 00000099, A PTE or PFN is corrupt Arg2: 000b0274, page frame number Arg3: 00000003, current page state Arg4: 0006d8f9, 0 BUGCHECK_STR: 0x4E_99 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: chrome.exe FAILURE_BUCKET_ID: 0x4E_99_nt!MiBadShareCount+24 BiosVersion = V1.2 BiosReleaseDate = 09/24/2009 SystemManufacturer = MSI SystemProductName = MS-7578 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` Debug session time: Mon Nov 26 20:27:18.003 2012 (UTC + 11:00) Loading Dump File [C:UsersMZSysnativeBSODApps112612-51890-01.dmp] Built by: 7601.17944.x86fre.win7sp1_gdr.120830-0333 System Uptime: 2 days 7:08:50.363 Bugcheck code 0000001A Arguments: Arg1: 00041790, The subtype of the bugcheck. Arg2: c08025c8 Arg3: 0000ffff Arg4: 00000000 BUGCHECK_STR: 0x1a_41790 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: chrome.exe FAILURE_BUCKET_ID: 0x1a_41790_nt!MiDeleteVirtualAddresses+41a BiosVersion = V1.2 BiosReleaseDate = 09/24/2009 SystemManufacturer = MSI SystemProductName = MS-7578 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` Debug session time: Sat Nov 10 12:04:19.918 2012 (UTC + 11:00) Loading Dump File [C:UsersMZSysnativeBSODApps111012-32203-01.dmp] Built by: 7601.17944.x86fre.win7sp1_gdr.120830-0333 System Uptime: 4 days 0:50:23.262 Bugcheck code 0000001A Arguments: Arg1: 00008887, The subtype of the bugcheck. Arg2: 85b355a8 Arg3: 86ad71e4 Arg4: 00000500 BUGCHECK_STR: 0x1a_8887 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: svchost.exe FAILURE_BUCKET_ID: 0x1a_8887_ZEROED_PAGE_CORRUPTED BiosVersion = V1.2 BiosReleaseDate = 09/24/2009 SystemManufacturer = MSI SystemProductName = MS-7578 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` Debug session time: Mon Nov 5 16:00:34.957 2012 (UTC + 11:00) Loading Dump File [C:UsersMZSysnativeBSODApps110512-35109-01.dmp] Built by: 7601.17944.x86fre.win7sp1_gdr.120830-0333 System Uptime: 3 days 21:24:49.300 Bugcheck code 0000001A Arguments: Arg1: 00005003, The subtype of the bugcheck. Arg2: 8da00000 Arg3: 00009412 Arg4: 09415a24 BUGCHECK_STR: 0x1a_5003 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: rundll32.exe FAILURE_BUCKET_ID: 0x1a_5003_nt!MiAllocateWsle+6f BiosVersion = V1.2 BiosReleaseDate = 09/24/2009 SystemManufacturer = MSI SystemProductName = MS-7578 จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` Two of those dumps point to Google chrome. Try using a different internet browser such as Safari, Firefox or Opera.

To stop the svchost.exe problem:

Go to start menu and type in "msconfig".
Under the Services tab, click "Hide all Microsoft Services", then click "Disable All".
Under the Startup tab, click "Disable All". Then go through the list and enable your AntiVirus.
Under the General tab, select "Selective Startup". Make sure only the boxes named "Load System Services" and "Load Startup Items" are checked.
Click "Apply", and restart the computer. stopping the svchost.exe crash should also fix rundll32.exe as well.

Driver List (Drivers in red should be updated or removed)
Code: **************************Sun Dec 2 10:57:20.836 2012 (UTC + 11:00)************************** mchInjDrv.sys Wed Jan 11 18:07:52 2006 (43C4AEC8) SSPORT.sys Wed Nov 22 15:41:42 2006 (4563D506) PxHelp20.sys Thu Mar 13 12:57:44 2008 (47D88A18) nvsmu.sys Mon Jun 29 17:36:34 2009 (4A486F02) hcw89.sys Wed Aug 12 01:03:00 2009 (4A818824) tbhsd.sys Wed Aug 26 22:15:36 2009 (4A952768) netr61.sys Fri Oct 16 14:13:52 2009 (4AD7E4F0) amdxata.sys Sat Mar 20 03:19:01 2010 (4BA3A3F5) RTKVHDA.sys Wed Jul 28 20:00:28 2010 (4C4FFFBC) nvmf6232.sys Thu Aug 12 21:45:46 2010 (4C63DEEA) nx6000.sys Fri Dec 3 09:23:35 2010 (4CF81C67) nvBridge.kmd Sat May 21 13:57:55 2011 (4DD73843) GEARAspiWDM.sys Fri May 4 05:55:59 2012 (4FA2E2CF) point32.sys Mon May 28 00:19:48 2012 (4FC23804) dc3d.sys Mon May 28 00:19:55 2012 (4FC2380B) nvhda32v.sys Wed Jul 4 01:24:41 2012 (4FF30EB9) MpFilter.sys Fri Aug 24 05:09:09 2012 (50367FD5) nvlddmkm.sys Wed Oct 3 04:15:55 2012 (506B2F5B) จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ`` Driver Reference Table - mchInjDrv.sys
Driver Reference Table - SSPORT.sys
Driver Reference Table - PxHelp20.sys
Driver Reference Table - tbhsd.sys
Driver Reference Table - nvmf6232.sys
Driver Reference Table - nx6000.sys

There are four drivers that I'm not sure of:
MpKsl22b7cbe3.sys
MpKsl0d839251.sys
MpKslc016d719.sys
MpKsl4f716d2a.sys
Check Google or Bing for driver details.