problem with the dvd drive Results


Page 9 of 32.
Results 161...180 of 624

Sponsored Links:



Hey guys...newbie posting out of total desperation and needing help! I have posted in other forums with no luck...

I bought a Samsung SH-D162D DVD Drive in a USB enclosure to connect to my Toshiba laptop via USB.

I cannot get windows 7 to find it! When I plug in the USB cable the balloon comes up to say it has been installed (sometimes), I can see it on for about 1 or 2 minutes then it drops off. It isnt listed in my hardware or anything.

Its not found in Disk Management or My Devices so it isnt a case of changing the drive letter - i cant find the drive to change it.

I have also tried to find the upper and lower settings in regedit....couldnt find them so couldnt delete them as advised in other posts of this nature.

It is set to master, the IDE connector and power connectors are fine. Its gotta be a windows 7 problem cause it does show up very breifly. In the minute or 2 its there I cant do anything with it...it just hangs although it will open and close. Ive googled it and cant find anything...mainly registry issues but they didnt help.

Ive also connected it up to another laptop with XP and had no problems so I know the DVD Rom works fine and all the cables are ok.

Ive tried in all 4 USB ports on my laptop and also turned off all energy settings...all with no luck. And I also have EVERY windows 7 update...

Heres exactly what happens from power off on the enclosure.

1 - I plug in the USB lead then turn on power to the enclosure.
2 - I quickly go to Start, and I can see the DVD Rom drive E next to my laptops dvd rom.
3 - The green bar at the top starts filling up from left to right and gets about half way then suddenly the DVD Rom icon disappears and so does the green bar.
4 - It then flashes up under the laptops DVD Rom icon with a Local Disk drive E but only for a split second.
5 - Sometimes a balloon comes up saying installing device, then device successfully installed...but not every time.

And thats it....Im at a total loss and cant work it out, so any help is really appreciated!




This is intended as a dual boot, but this darn thing jsut wont boot from the DVD to install...

I looked for another with the same problem, but it seems like no one has gone as far as I have.

I have burned 2 different .iso's from different DL sources(1 was microsoft), tried changing to a .img, unpacked the .iso and burned individual files.

Yes, my boot priority is set to DVD 1st.

I tried my XP install disk and it boots to it just fine.

System specs:
CPU= Q9450 @3.6ghz
Mobo=Asus p5q-pro
RAM=4gigs OCZ DDR2 1066
HDD= WD 640GB w/ new partition
GPU= ATI HD 4850
Lite On DVD drive w/ Verbatim DVDs

Let me know if I left anything else out...

Thanks in advance, I have a feeling I'm overlooking something obvious, but I can't seem to see it.




Hey guys

I know there are probably some other threads with this same problem i got but i was unable to find any useful answer in them so therefore i ask again.
I have been running Windows 7 for i think 1 week now and since yesterday i cant install ANYTHING on my computer, it dosent matter if i try to install it from a virtual drive (Daemon Tools) or from my regular DVD drive. I tried new drivers with no luck, and no the day the problem started i haven't installed anything new not even updated my windows or run an anti-virus scan. So i really cant explain why it just suddenly started.

Any and i mean any idea would be helpful, and reinstalling is only my last resort

Thanks for all the help!




Hey everybody,
I know this problem has been seen before, even before windows 7. Problem is I've been trying to install the 32bit version of 7 since the RC came out and the installation always hangs at "completing installation". The install boots a little slow, but it goes through everything. I'm doing a fresh install of the RC because I was using the 7 beta before (which gave me little to no problems when I installed it). I start the install on the whole HD (unallocated space). It goes through the copying windows files and expanding alright and installs features and updates. Then it reboots, and I see the 7 logo. Then it's on the completing install, changes resolution, and hangs. It'll either blue screen after a few hours and reboot to a black screen, or just hang at the install.

System specs:
Foxconn Motherboard P9657AB-8EKRS2H
Intel Pentium E2220 Allendale 2.4GHz 1MB L2 Cache LGA 775 65W Dual-Core Processor
PNY VCG98GTXPXPB GeForce 9800 GTX+ 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
2GB Crucial Ballistix DDR2 BL2KIT12864AA80A
WD Caviar Blue 500GB SATA
normal DVD drive
USB keyboard/mouse
LG LCD monitor

So I've tried a lot of different things but to no avail.

I've downloaded and redownloaded the 32bit on the microsoft technet site. Burned with a separate player once at default speed and once at x1. I believe the disk works fine.
I've tried install NVIDIA drivers through the notepad trick but that still doesn't help.
I've tried removing one of the RAM which doesn't do much either.
I've disabled some of the onset chip stuff in my BIOS which doesn't work either.
I've even reinstalled Vista and try to upgrade to the 7 RC while in vista, which doesn't work, also hangs at the final step.

I think it may be the LCD, but idk why. Thing is there's no onboard video on the motherboard so my monitor has to attach to the video card. I don't know why it changes resolution in the middle of the completing installation part either.

Thanks to all who read the long post. Any advice and tips are appreciated.

-Swarles




I am trying to install the Windows 7 RC 64-bit as a fresh install. I am coming from a Windows XP Home Edition. I backed up all my important data and restarted and booted to the Windows 7 RC DVD. I chose custom install and then formatted the partition (only took like 5 seconds. Strange) and continued with the install. It took about ~20 minutes and then restarts. The installation reads "Completing Installation" and then auto-restarts again. This time, I get the screen that says Windows was shut down incorrectly and it gives me the option to start in safe mode or normal. I start in normal (and tried safe mode) and then when Windows 7 loads up I get a message that says "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click OK to restart the computer, and then restart the installation." Anybody have success beating this problem?

PS. I ran the Windows 7 Advisor program and passed.

Specs:

AMD Athlon 64 X2 4400+
2gb DDR2 Ram
350gb Hard Drive
NVIDIA Geforce 8600GT
Creative Sound Blaster Live




I've spent quite a few days trying to install Win 7 in a dual boot enviroment with an existing Vista operating system. Vista came pre-installed on a large SATA HD that I reconfigured into 2 partitions (Vista on the 1st). Unfortunately, the OEM cabled the drive to one of the middle sequenced of 6 SATA connectors on the motherboard. I added another SATA HD to one of the lower ordered motherboard connectors. Selecting the Vista drive to boot 1st in the BIOS works fine for Vista, but this kind of configuration doesn't work when adding Win7. Win7 will install a "boot" folder on the lowest ordered HD (say HDD 0). Win7 boots fine from the installation DVD, but will only boot to Vista without the DVD. The boot loader just doesn't see Win7.

Re-ordering the SATA HD's connectors on the motherboard so the boot drive is recognized 1st, with Vista on the 1st partition & then installing Win7 on the 2nd partition finally got it all working just fine. BCD editors & boot loaders now work also.




I might have missed this somewhere so bare with me and I will tell you what I have done so far. I have win 7 x64, which I have installed on my old hp laptop with no problems whatsoever. I have tried several things to get it to work on my gigabyte ga-ma78gm-2sh motherboard. I am using an IDE drive for the os. the dvd and a storage drive is SATA. I have removed the tv tuner, every memory stick, db15 connection and sata in ide mode. the furtherest I get is "starting installation". I have even tried using an ide dvd or usb dvd to install this. I dont get near as far using the IDE dvd and the db15 monitor connection...it is really slow and wont get to install. DVD sata in IDE mode using HDMI output seems to get the furtherest. Am I missing anything? I might try next by removing all sata devices. anything else to try?




I have an older system currently running Vista Home Premium x64. It is a Biostar K8NHA Grand nForce 3 250 chipset board, Athlon 64 3400+ (2.4Ghz) CPU, 2Gb ram, MSI GeForce 7600GT 512mb AGP video card, Maxtor 340Gb IDE HD and an NEC IDE DVD burner. Runs Vista x64 fine, only used connected to a TV for streaming Netflix, online TV shows, etc.

When trying to install Win 7 RC x64 after I click on the install screen, I get a message saying it needs a driver for the CD/DVD device. I have pointed it to look in the Vista system32/drivers, an nVidia folder with IDE drivers but it keeps telling me no driver found. Why would 7 need a driver for a standard IDE device? It reads the hard drive OK so I am assuming it has some IDE interface controller installed. I had uninstalled the anti-virus program in Vista before I ran the 7 RC install just in case.

Sam




I have searched the trheads and have found similar questions but I have a somewhat unique problem, I think.

I had originally used Vista and then signed up for the W7 Beta. I installed it on a partition of my HD and set up dual boot. Sometime afterwards I tried to use an online data storage program and was greeted with the BSOD on Vista. After 1 1/2 hours on the phone with tech support we were finally able to get Vista to boot again. During this I was still able to boot via W7 though. Also during this time a gremlin found its way into my DVD RW drive and it has ceased to work (I believe to be software related). Since then I have again tried to use online backups and found the same problem as before. I haven't figured out what has caused that and gave up on fixing it and began using W7 as my main OS.

What I would like to do is remove Vista from my system all together and begin using W7 Beta alone. I have been running into some problems with storage space and would like to get rid of the Vista partition. The twist is that I don't have a DVD drive as it not only stopped burning but also stopped reading CDs or DVDs.

Is there a way to remove the Vista partition without a DVD to boot from from for W7?

Thanks and my apologies for potentially redundant question...I use this computer for work and am really scared that I am going to fry it and not have a way to recover since I have no dvd drive.




Actually, I had this problem with 7000 and 7022 as well.
Insert DVDLaunch setup.exe from within Win7 7048Click "Install Now"
Almost immediately I get:
"Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your boot disk has at least 688 megabytes (MB) of free space.

Error code: 0x80070490"

I've done a full day of searching for more info online and really haven't found anything that relates to Win7. I have done the following:
Verify available space on C: (which is over 400GB free)
Checked permissions and ownership on temp folders (although it was never changed from the initial install)
Launch setup.exe as Administrator

The install will work if I boot from DVD but will not perform an upgrade, of course. However, a full install is possible to the same or secondary hard drive.

Any ideas are welcome.




Hi all i'm new to this forum, and I'm having serious problems installing Windows 7!!

When I restart my computer to boot from the dvd I "Press any key to boot from DVD or CD" but then i just am left at a blank screen....i've let it sit for 10 minuiets with no luck. The CD-ROM drive stops like its done loading...

I've got my ISO burned to a DVD, I have tryed running the dvd on a virtual PC and it is able to boot just fine, and install off of it. Makes me think its a video card problem??

I'm running a nVidia GeForce 6200




Hi Everyone,
I've upgraded from XP Pro SP3 to Win7 Home Premium. I'm just getting started with this upgrade and am new to this forum, so I apologize in advance for any posting gaffes.

The immediate problems so far:

1. Sound - I have a Creative X-Fi Extreme Audio card, which worked OK the first few days after the upgrade. Now I'm getting no sound, (Win7, media file playback, Creative driver sound tests, etc). The Device Manager sees the card and doesn't report any conflicts or other problems.

I think it has something to do with the Windows Audio services not running. The Audio end Audio Endpoint Builder services are set to Automatic all right but I can't start them because the dependencies aren't running. So I checked the dependencies and the ones listed for the audio services are all running, I think. "Plug and Play" was one of the listed dependencies. The service by that name is running and so is the uPnP service. The problem here may be that I haven't correctly identified all "Plug and Play" services that ought to be going.

Another group of services that I think I've verified are those Remote Procedure Calls (RPC) ones. There are 3 that have names sounding close enough, and they're all running. Any ideas on this?

Oh yeah, the Xi-Fi driver and application suite is supposed to be the latest for Win7. However, those are the official drivers and programs. Those of you with some Creative experience know that a lot of driver support for this hardware is maintained unofficially on the Creative Forums. I just haven't figured out where to go on this yet.

2. BD-RW drive support. My drive is the LG Electronics GGW-H20L SATA BluRay player/burner, also back-compatible to DVD+/-RW. This worked OK in XP using Windows-provided drivers and LG firmware. The problem with Win7 is that I can't get the drive to be recognized by the OS. The Device Manager can see it and correctly identify it - the error is "This device cannot start (Code 10)." This translated to no drive letter assigned and no drive visible in Explorer.

LG support suggested a Firmware upgrade and sent me an executable installer, which of course failed because it couldn't see the drive. They also pointed me to the CD-DVD drive troubleshooter in Windows 7. This too failed but returned a few suggested places to look elsewhere. I'm in the process of exploring those, which is how I came here.

So that's where I am at the moment. Does anyone have any idea what might be happening in these two areas, or where I would be better off posting if this isn't the right place?

I've put some of my system specs in my forum profile. Should I also be pasting those in messages like this one, or is the profile the place for that stuff to be?

Thanks for your time and patience,




I'm sorry if this is a duplicate post, but honestly, I did Search for "Code 5" and found nothing.

I have a HD on an eight year old desktop PC that had an early beta version of Win-7 on it.
That old version has already expired.

I wanted to boot up with my Windows 7 Ultimate DVD and just do an overlay install. Well, every time I tried to boot the PC from the DVD drive, I got the dreded "Cannot Boot From CD, Code 5" error message. Of course I Googled the problem and found only one fix that I was able to execute.

The fix involves running the Setup on the Win-7 DVD from within an earlier version of Windows. The suggested version was Viata, but since I already had an early version of Win-7 on there, I tried that. So far so good.

The Setup program informed me that it would put the old OS in a folder called Windows.OLD.
I guess that's OK, because I can always delete that later. Eh?

This OLD computer may not run Windows 7 Ultimate very well at all, but at least I found a "Work Around" for that nasty Code 5 error message.

+ Win-7 did get the sound working and set up my wireless N card with no problem.
But it doesn't seem to know exactly what to do with my 8 (or maybe 9) year old video card.
I can live with 800x600 resolution, for now. It does have one higher res., but the on-screen text is almost unreadable. But for a testing machine, this one is working pretty well. I even got Windows Mail working with a minimum of effort.

Cheers Mates!




Hi guys, I have a problem with Windows 7 Ultimate x64 setup and it's quite frustrating. Before I explain what is happening let me give you my system specifications

CPU: Intel Core i7 870
Motherboard: Gigabyte GA-P55A-UD4 rev 2.0
Ram: Excelram 2x2GB Red Culvert 1600 mhz
Disk: Seagate Barracuda 320GB SATA II 3Gb/s
Graphics: Sapphire Radeon HD 6870 1Gb GDDR5
DVD Drive: NEC Optiarc

Ok so I've put in the Windows 7 DVD, booted from it, deleted the partitions and created them anew and formatted the non-system one where Windows is to be installed. Windows then extracts the files normally and reboots the system. Here's where things get tricky. The system hangs after the screen "Setup is updating registry settings" and doesn't move anywhere. I even left it on during the night and it didn't budge. In some instances (I've tried installing more than 10 times) I actually get pass this screen but then get stuck at "Completing installation". And I even got pass that screen in one attempt when I ejected the CD, but when the system rebooted, it hung at "Starting Windows" screen.

Now I have read a lot about this problem on the forums and here's what I've tried so far, to no avail of course:

Removing one stick of ram
Removing all external devices, everything not needed and setting the floppy drive to NONE in BIOS
Removing everything from USB slots and disabling them in BIOS
Entering Safemode and opening Device manager through the command prompt and disabling/uninstalling VGA drivers
Switching SATA connectors on the motherboard

Thats about everything I tried with no success. Does anybody have any idea what could be causing this and what the solution might be? It's a new computer, was built yesterday and it's really frustrating not getting it to work.

Thank you,
Jure




I have just purchased some upgrades for my rig

I now have the following new parts

ASUS P7P55D Motherboard
Intel I7-860 Processor
4 GB DDR 3 RAM
2 x 500 GB Seagate Baracuda HDD

I added them in with my exisiting

2 x Nvidia 8800 GTX in SLI mode
2 x 250 GB Seagate Baracuda HHD

I have a PSU pushing out plenty of juice. I have tried to instal Win 7 Ultimate 64 Bit edition (Upgrading my last rig from XP 64 Pro worked fine)

When I have set up the RAID for the HDD i set the system to boot from Optical Drive. the system then unpacks the windows files from DVD. I then get the starting windows picture with the Windows symbol made up from the flying balls of colour. However then at about 30 sec the rig resets and goes back in to the loop of unpacking the files going to the widows splash screen then crashing and repeating.

I have tried to do the install with only 1 2 Gb Stick of Ram and only 1 GFX card.

I have also tried to instal using the MOBO abiliy to use SATA drives as IDE.

All attempts and configuations end in the same thing happening.

I have been told to force boot to Opical then when it goes round take it out so that it runs from drives to force it to rn from files on HDD for installation. nothing works that I or others can seem to think of.

I am hoping that some one out there may have an idea on how to fix it so I can get an install to work for Windows 7.

On a side note I did try to reinstall Windows XP 64 Pro anf then up grade again. however this just went in to another loop of crashing at the Installing devices with 34 mins to go.

Any help would be great and a solution would be outstanding. would like to try and get it sorted before having to pay out to have it fixed




Hi there...

I got 7600.16385.090713-1255 x64 Windows 7, but i'm really struggling at installing it.

I currently have XP pro x32 service pack 3 on my pc, but it simply wont install.

I know that it wont run from XP itself, as it gives me the "This Installation disc isn't compatible with your version of Windows, To upgrade, you need the correct installation disc, for more information check your computer's system information. To install a new copy of windows, restart (boot) your computer using the installation disc and then select custom (advanced)" error...

I've searched forum after forum but can't seem to get it to install...

I've burned an copy of the iso to a disk & tried running it via booting, but it doesn't start installing... it just skips to windows XP...

can it be my hardware or my cd image that is wrong?

My hardware:
AMD Phenom 9950 BE
ASRock K10n78 Motherboard
2GB Samsung + 2x1GB Corsair XMS Ram (tried combinations of them by removing some as well)
XFX 9800gt 512MB G/C (tried using the onboard geforce 8200 card as well)
Seagate 500gb sata H/D
TSSTcorp CD/DVDW TS-H552U Samsung IDE DVD Drive
DLink Wireless adapter
500W power Supply

The contents of my DVD:

Am I missing some files needed to boot up in startup or is my DVD ROM not suited for the job?

Thank you

PS - I've tried installing it from a flash drive, but no success...
How to Install Windows 7 From USB Drive without Windows 7 ISO DVD




I have just built a new computer. And am getting BSODs. Here's my notes on them:

Errors Codes are as follows:

(I didn't write the codes down the first 2 times)

3rd BSOD (3/22/11):
*** STOP: 0x0000007F (0x0000000000000008, 0x0000000080050031, 0x00000000000006F8, 0xFFFFF80003888F72)

4th BSOD (3/25/11):
*** STOP: 0x0000007F (0x0000000000000008, 0x0000000080050031, 0x00000000000006F8, 0xFFFFF80003888F72)
*** dxgmms1.sys - address FFFFF880061B2360 base at FFFFF880061A2000, DateStamp 4ce799c1

5th BSOD (4/11/11):
SYSTEM_SERVICE_EXCEPTION
*** STOP: 0x0000003B (0X00000000C0000005, 0xFFFFF96000093BFA, 0xFFFFF88008B0C210, 0x0000000000000000)
*** win32k.sys - Address FFFFF96000093BFA base at FFFFF96000010000, DateStamp 4d2415ea

6th BSOD (4/13/11):
win32k.sys
An Attempt was made to write to read-only memory.
***STOP: 0x000000BE (0xFFFFF960002E22D8, 0x80900003ED6AC021, 0xFFFFF88002A64960, 0x000000000000000B)
*** win32k.sys - Address FFFFF96000103977 base at FFFFF96000040000, DateStamp 4d2415ea

7th BSOD (4/17/11):
IRQL_NOT_LESS_OR_EQUAL
***STOP: 0x0000000A (0xFFFFF6F44001A710, 0x0000000000000002, 0x0000000000000001, 0xFFFFF800038D58E9)
-this was the first time it did this (might be cause i enabled pagefile.sys before this crash?):
Collecting data for crash dump...
Initializing disk for crash dump...
Beginning dump of physical dump.
Dumping physical memory to disk: (1-100 count ticker ran)
Physical memory dump complete.

My system is as follows:

-CPU: AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 w/ ZALMAN 9500A-LED 92mm 2 Ball CPU Cooler
-RAM: 2X G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL (16GB total)
-SSD: Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB SATA III MLC Internal Solid State Drive (mainly have OS on here, and heavy programs like my DAW's)
-2x HDD: Western Digital Caviar Green WD20EARS 2TB SATA 3.0Gb/s Hard Drives (4gb total. In RAID 1 Mirror, 2 partitions: P: 195gb for programs and the rest S: 1.62gb for stoarage)
-VID CARD: ASUS EAH6870 DC/2DI2S/1GD5 Radeon HD 6870 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity
-MOBO: GIGABYTE GA-880GA-UD3H AM3 AMD 880G SATA 6Gb/s USB 3.0 HDMI ATX AMD Motherboard
-POWER SUPPLY: CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
-DVD R/RW: Philips Internal Drive SPD2415BD DVD 20x ReWriter SPD2415BD/17 IDE
-OS: Windows 7 Ultimate 64 bit (MSDN version) on SSD
-FIREWIRE AUDIO PERIPHERAL: Presonas Firestudio Project Firewire recording interface
-DISPLAY: 2 monitors set up as follows: Samsung 226bw (s version) via DVI cable plugged into top DVI port of my video card. And a Gateway 700G 17 inch monitor Via DVI/HDMI adapter on bottom port of my video card via HDMI to DVI cable (i didnt have another DVI cable lying around).
-AUDIO RECEIVER: Optical Denon AVR-1801 DTS precision audio recivier (with 5.1 speaker setup)
-CASE: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
-MOUSE: Logitec MX518 usb wired
-KEYBOARD: emachines ps/2 wired

What I can say what i was doing when i got the blue screens:

-first two times all i know is i was in ventrilo (voice communication program) using a usb mic and one of those times i was playing Team Fortress 2
-3rd and 4th times i was recording with my Presonas Firestudio Project interface.
-5th crash i was away. i do'nt think i had anything major running and the screens were off and i was out of the room.
-6th crash i was playing DOD:S for about 30 mins Fire Studio project was off.
-7th crash playing TF2 for 5 mins at most. Fire Studio project was on and default audio device.

My system hiccups sometimes when it shouldn't with these specs. Such as when typing in a web browser sometimes ill be typing and the cursor will freeze for a second then all that I typed while it was frozen will all pop out at once. or when playing games like TF2 there will be lots of sound loops (repeats a split second sound clip 3 to 5 times then proceeds) and video hiccups. these might be because my internet is bad also?

So far i have done the following to try to fix this error:

Ran:
-Disk Defrag on all drives
-Maleware (0 threats)
-IoBit secutry 360 (0 threats)
-AVG free (1 threat removed)
-CCleaner (both registry and disk clean)
-Driver Max and updated every Driver
-Windows Memory Diagnostics Tool with 0 problems.
-Prime95 (359 Torture Tests in 8 hours, 14 minutes with 0 errors and 0 warnings)

-Monitored all temps via CPUID's HW monitor. all temps look really nice and low even during stress tests.
MAXIMIM TEMPS:
CPU: 52 C (all cores during prime95 | ~40 C max during games and other normal high usage)
GPU: 81 C (during furmark, no more than 57 C during games)
HDDs: 25-26 C always
TMPIN0 34 C (after prime95 stress test)
TMPIN1 56 C (after prime95 stress test)
TMPIN2 57 C (after prime95 stress test)
-Voltages:
Voltage 0 1.22 Volts [0x4C] (CPU VCORE)
Voltage 1 1.47 Volts [0x5C] (VIN1)
Voltage 2 3.36 Volts [0xD2] (+3.3V)
Voltage 3 5.03 Volts [0xBB] (+5V)
Voltage 4 12.42 Volts [0xC2] (+12V)
Voltage 5 -8.96 Volts [0x8C] (-12V)
Voltage 7 3.60 Volts [0x86] (+5V VCCH)
Voltage 8 3.25 Volts [0xCB] (VBAT)
Processor Watts: 62.40 W - 141.6 W
Vid Card Votls: VINO 1.2V

-AS SSD to see my drivers. got this:
C:
AS SSD Benchmark 1.6.4067.34354
------------------------------
Name: C300-CTFDDAC064M SCSI Disk Device
Firmware: 0006
Controller: ahcix64s
Offset: 103424 K - OK
Size: 59.62 GB
Date: 3/26/2011 11:56:01 AM
------------------------------
P:
AS SSD Benchmark 1.6.4067.34354
------------------------------
Name: AMD 1X2 Mirror/RAID1 SCSI Disk Device
Firmware: 1.10
Controller: ahcix64s
Offset: 132096 K - OK
Size: 1862.64 GB
Date: 3/26/2011 11:55:34 AM
------------------------------
S:
AS SSD Benchmark 1.6.4067.34354
------------------------------
Name: AMD 1X2 Mirror/RAID1 SCSI Disk Device
Firmware: 1.10
Controller: ahcix64s
Offset: 204932096 K - OK
Size: 1862.64 GB
Date: 3/26/2011 11:55:03 AM
------------------------------
(C is my SSD with windows 7 on it and P and S are 2 partitions i set up on my RAID 1 Sata drives for Programs and Storage)

-Ran Windows Action Center and got this:
Driver software installation
Problem: Could not install driver software
Files that help describe the problem:
DMI3140.tmp.log.xml
oem36.inf
setupapi.app.log
setupapi.dev.log
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

-I have ran a check Disk on all 3 partitions just after crash 4
C: (my SSD) 0 problems, 0 bad sectors.
S: (1.62TB Partition on my RAID 1 drives for storage) 0 problems, 0 bad sectors
P: (200gb partition on my RAID 1 drives for programs)
CHKDSK P:
The type of the file system is NTFS.
Volume label is Programs.

WARNING! F parameter not specified.
Running CHKDSK in read-only mode.

CHKDSK is verifying files (stage 1 of 3)...
7680 file records processed.
File verification completed.
0 large file records processed.
0 bad file records processed.
0 EA records processed.
0 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
9000 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
7680 file SDs/SIDs processed.
Security descriptor verification completed.
661 data files processed.
CHKDSK is verifying Usn Journal...
9177824 USN bytes processed.
Usn Journal verification completed.
The master file table's (MFT) BITMAP attribute is incorrect.
The Volume Bitmap is incorrect.
Windows found problems with the file system.
Run CHKDSK with the /F (fix) option to correct these.

204799999 KB total disk space.
26162916 KB in 6907 files.
3300 KB in 662 indexes.
0 KB in bad sectors.
89295 KB in use by the system.
65536 KB occupied by the log file.
178544488 KB available on disk.

4096 bytes in each allocation unit.
51199999 total allocation units on disk.
44636122 allocation units available on disk.

I ran it with /F and it fixed the problem. but still got BSOD after this (5th crash)
I have run CHKDSK with /R again just in case and found no errors no bad sectors on all partitions.

-Calculated my power supply using Antec's power supply calculator:
System Type: Single Processor
Motherboard: High End - Desktop
CPU: AMD Phenom II X6 1090T 3200 MHz Thuban
CPU Utilization (TDP): 90% TDP
RAM: 4 Sticks DDR3 SDRAM
Video Card: AMD Radeon HD 6870
Video Type: Single Card
Green SATA: 2 HDDs
Flash SSD: 1 Drive
DVD-RW/DVD+RW Drive: 1 Drive
USB: 3 Devices
IEEE-1394 FireWire: 1 Device
Fans
Regular: 1 Fan 120mm; 1 Fan 250mm;
LED: 1 Fan 92mm; 3 Fans 120mm;
Keyboard and mouse: Yes
System Load: 90 %
Recommended Minimum
PSU Wattage: 429 Watts

Neweggs power supply calculator: 527 Watts recommend

I'm 123-221 watts over recommend supply. shouldn't be a problem there.

-Did some GPU stress tests using FurMark:
First i did a Burn-In test for 30 minutes @ full screen Resolution: 1680x1050 (FS) - AA:2 samples:
max temp 81, avg fps 25, max fan speed 47%

then some Benchmarks at 1 min each one right after the other with little time in between to cool off:
-BM 1 SCORE:1488 points (24 FPS, 60000 ms) FPS: min:22, max:31, avg:24 - OPTIONS: DynBkg
-BM 2 SCORE:943 points (15 FPS, 60000 ms) FPS: min:13, max:19, avg:15 - OPTIONS: DynCam
-BM 3 SCORE:1318 points (21 FPS, 60000 ms) FPS: min:22, max:23, avg:21 - OPTIONS: none (burn in)
-BM 4 SCORE:646 points (10 FPS, 60000 ms) FPS: min:11, max:12, avg:10 - OPTIONS: XB
-BM 5 SCORE:2179 points (36 FPS, 60000 ms) FPS: min:34, max:40, avg:36 - OPTIONS: FX

no crashes. temps look good.

Thoughts of possible suspects:
-Driver issues? (sound cards?)
-Bad Windows install? Maybe bad windows install discs? Discs were bought off eBay and looked questionable. I will get new ones from M$ and reformat soon.
-When I first installed windows Pagefile.sys and hibernate.sys were huge (~13gb each) so i disabled hibernate and disabled Pagefile.sys. -I enabled my PageFile.sys after 6th crash to see if that helped but crashed again but i got a crash dump 7th time.
-Monitor issues? maybe the cabling on the second monitor is messing with something (DVI to HDMI converter on vid card with a HDMI to DVI cable to monitor). I just didn't have another DVI lying around). 2 different resolutions, sizes and aspect ratios? Attached Thumbnails     Attached Files 041711-20623-01.zip (24.5 KB, 64 views) dballs_Docs.zip (1.03 MB, 67 views) rammon.txt (11.3 KB, 140 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left;   JavaScript must be enabled 04-18-2011 #2 cybercore Premier Member Enjoys Windows 7 Forums  
Join Date Jul 2009 Posts 7,900 Re: BSOD's on new home build w/ full description
BugCheck A, {fffff6f44001a710, 2, 1, fffff800038d58e9}
Process: hl2.exe
Stack nt ... nt
Probably caused by : memory_corruption ( nt!MiUnmapPageInHyperSpaceWorker+49 )

RAM is the problem.

1. Load bios defaults, save and reboot. Make sure AMD Cool and Quiet is on. Also, should be no overclocking.
2. Uninstall AVG (replace with MSE for now) and uninstall Daemon Tools.
3. If still crashes, decrease the total amount of RAM by removing sticks.

PSU Wattage: 429 Watts Consider a more powerful unit.

CRASH DUMPS

Code: Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [F:DMP41711-20623-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850 Machine Name: Kernel base = 0xfffff800`0381f000 PsLoadedModuleList = 0xfffff800`03a64e90 Debug session time: Sun Apr 17 19:24:49.621 2011 (UTC - 4:00) System Uptime: 0 days 5:49:38.385 Loading Kernel Symbols ............................................................... ................................................................ .......................................... Loading User Symbols Loading unloaded module list ......... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {fffff6f44001a710, 2, 1, fffff800038d58e9} Probably caused by : memory_corruption ( nt!MiUnmapPageInHyperSpaceWorker+49 ) Followup: MachineOwner --------- 5: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: fffff6f44001a710, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff800038d58e9, address which referenced memory Debugging Details: ------------------ WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80003ad00e8 fffff6f44001a710 CURRENT_IRQL: 2 FAULTING_IP: nt!MiUnmapPageInHyperSpaceWorker+49 fffff800`038d58e9 48832100 and qword ptr [rcx],0 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0xA PROCESS_NAME: hl2.exe TRAP_FRAME: fffff8800ab948b0 -- (.trap 0xfffff8800ab948b0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=000000000000000e rbx=0000000000000000 rcx=fffff6f44001a710 rdx=0000098000000000 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800038d58e9 rsp=fffff8800ab94a40 rbp=fffff680002a5358 r8=0000000000000001 r9=0000000000000001 r10=0000000000000000 r11=0000000000000002 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz na po nc nt!MiUnmapPageInHyperSpaceWorker+0x49: fffff800`038d58e9 48832100 and qword ptr [rcx],0 ds:fffff6f4`4001a710=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff8000389ebe9 to fffff8000389f640 STACK_TEXT: fffff880`0ab94768 fffff800`0389ebe9 : 00000000`0000000a fffff6f4`4001a710 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx fffff880`0ab94770 fffff800`0389d860 : 00000000`00000000 00000000`0e077990 00000000`0000014c fffff880`034d4000 : nt!KiBugCheckDispatch+0x69 fffff880`0ab948b0 fffff800`038d58e9 : 00000000`00001000 00000000`00000000 00000000`00000000 00000000`00000008 : nt!KiPageFault+0x260 fffff880`0ab94a40 fffff800`038f8a3d : fffff880`034e2000 fffff680`002a5358 00000000`00000001 00000000`00000000 : nt!MiUnmapPageInHyperSpaceWorker+0x49 fffff880`0ab94a80 fffff800`038ad09d : fffffa80`04fcae80 fffff880`0ab94b40 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0xae5f fffff880`0ab94ac0 fffff800`0389d76e : 00000000`00000001 00000000`54a6b000 fffffa80`0cb76001 00000000`2b8be740 : nt!MmAccessFault+0xa7d fffff880`0ab94c20 00000000`68ea38ea : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e 00000000`1241fd34 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x68ea38ea STACK_COMMAND: kb FOLLOWUP_IP: nt!MiUnmapPageInHyperSpaceWorker+49 fffff800`038d58e9 48832100 and qword ptr [rcx],0 SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: nt!MiUnmapPageInHyperSpaceWorker+49 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7951a IMAGE_NAME: memory_corruption FAILURE_BUCKET_ID: X64_0xA_nt!MiUnmapPageInHyperSpaceWorker+49 BUCKET_ID: X64_0xA_nt!MiUnmapPageInHyperSpaceWorker+49 Followup: MachineOwner ---------

DRIVERS

Code: start end module name fffff880`04910000 fffff880`0494e000 1394ohci 1394ohci.sys Sat Nov 20 05:44:56 2010 (4CE7A6A8) fffff880`01000000 fffff880`01057000 ACPI ACPI.sys Sat Nov 20 04:19:16 2010 (4CE79294) fffff880`03000000 fffff880`03089000 afd afd.sys Sat Nov 20 04:23:27 2010 (4CE7938F) fffff880`049a4000 fffff880`049ba000 AgileVpn AgileVpn.sys Mon Jul 13 20:10:24 2009 (4A5BCCF0) fffff880`01400000 fffff880`0145a000 ahcix64s ahcix64s.sys Thu Sep 23 05:49:41 2010 (4C9B22B5) fffff880`049ea000 fffff880`049fe000 amdiox64 amdiox64.sys Thu Feb 18 10:17:53 2010 (4B7D5A21) fffff880`0419a000 fffff880`041af000 amdppm amdppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD) fffff880`00df1000 fffff880`00dfc000 amdxata amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA) fffff880`09a71000 fffff880`09a7c000 asyncmac asyncmac.sys Mon Jul 13 20:10:13 2009 (4A5BCCE5) fffff880`01075000 fffff880`0107e000 atapi atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113) fffff880`00dc7000 fffff880`00df1000 ataport ataport.SYS Sat Nov 20 04:19:15 2010 (4CE79293) fffff880`06517000 fffff880`06537000 AtihdW76 AtihdW76.sys Wed Nov 17 07:02:04 2010 (4CE3C43C) fffff880`04ca4000 fffff880`055d9000 atikmdag atikmdag.sys Tue Mar 22 22:12:23 2011 (4D895707) fffff880`04000000 fffff880`0404f000 atikmpag atikmpag.sys Tue Mar 22 21:44:22 2011 (4D895076) fffff880`01894000 fffff880`0189c000 AtiPcie AtiPcie.sys Tue May 05 11:00:22 2009 (4A005486) fffff880`01d52000 fffff880`01d86000 AVGIDSDriver AVGIDSDriver.Sys Tue Aug 03 18:24:45 2010 (4C58972D) fffff880`0188a000 fffff880`01894000 AVGIDSEH AVGIDSEH.Sys Mon Sep 13 18:46:38 2010 (4C8EA9CE) fffff880`07e71000 fffff880`07e7d000 AVGIDSFilter AVGIDSFilter.Sys Tue Aug 03 18:23:21 2010 (4C5896D9) fffff880`04124000 fffff880`04174000 avgldx64 avgldx64.sys Tue Dec 07 21:01:55 2010 (4CFEE713) fffff880`01db2000 fffff880`01dc1000 avgmfx64 avgmfx64.sys Mon Sep 06 20:49:14 2010 (4C858C0A) fffff880`01880000 fffff880`0188a000 avgrkx64 avgrkx64.sys Mon Sep 06 20:49:37 2010 (4C858C21) fffff880`030db000 fffff880`0313c000 avgtdia avgtdia.sys Fri Nov 12 06:08:42 2010 (4CDD203A) fffff880`01dca000 fffff880`01dd1000 Beep Beep.SYS Mon Jul 13 20:00:13 2009 (4A5BCA8D) fffff880`04113000 fffff880`04124000 blbdrive blbdrive.sys Mon Jul 13 19:35:59 2009 (4A5BC4DF) fffff880`07f84000 fffff880`07fa2000 bowser bowser.sys Tue Feb 22 23:55:04 2011 (4D649328) fffff960`00670000 fffff960`00697000 cdd cdd.dll Sat Nov 20 07:55:34 2010 (4CE7C546) fffff880`01d88000 fffff880`01db2000 cdrom cdrom.sys Sat Nov 20 04:19:20 2010 (4CE79298) fffff880`00d07000 fffff880`00dc7000 CI CI.dll Sat Nov 20 08:12:36 2010 (4CE7C944) fffff880`01850000 fffff880`01880000 CLASSPNP CLASSPNP.SYS Sat Nov 20 04:19:23 2010 (4CE7929B) fffff880`00ca9000 fffff880`00d07000 CLFS CLFS.SYS Mon Jul 13 19:19:57 2009 (4A5BC11D) fffff880`01520000 fffff880`01592000 cng cng.sys Sat Nov 20 05:08:45 2010 (4CE79E2D) fffff880`04994000 fffff880`049a4000 CompositeBus CompositeBus.sys Sat Nov 20 05:33:17 2010 (4CE7A3ED) fffff880`07e7d000 fffff880`07e86000 cpuz135_x64 cpuz135_x64.sys Wed Jan 19 11:42:06 2011 (4D37145E) fffff880`0711f000 fffff880`0712d000 crashdmp crashdmp.sys Mon Jul 13 20:01:01 2009 (4A5BCABD) fffff880`04072000 fffff880`040f5000 csc csc.sys Sat Nov 20 04:27:12 2010 (4CE79470) fffff880`040f5000 fffff880`04113000 dfsc dfsc.sys Sat Nov 20 04:26:31 2010 (4CE79447) fffff880`01ddf000 fffff880`01dee000 discache discache.sys Mon Jul 13 19:37:18 2009 (4A5BC52E) fffff880`0183a000 fffff880`01850000 disk disk.sys Mon Jul 13 19:19:57 2009 (4A5BC11D) fffff880`06574000 fffff880`06596000 drmk drmk.sys Mon Jul 13 21:01:25 2009 (4A5BD8E5) fffff880`07139000 fffff880`07142000 dump_atapi dump_atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113) fffff880`0712d000 fffff880`07139000 dump_dumpata dump_dumpata.sys Mon Jul 13 19:19:47 2009 (4A5BC113) fffff880`07142000 fffff880`07155000 dump_dumpfve dump_dumpfve.sys Mon Jul 13 19:21:51 2009 (4A5BC18F) fffff880`07113000 fffff880`0711f000 Dxapi Dxapi.sys Mon Jul 13 19:38:28 2009 (4A5BC574) fffff880`04269000 fffff880`0435d000 dxgkrnl dxgkrnl.sys Sat Nov 20 04:50:50 2010 (4CE799FA) fffff880`0435d000 fffff880`043a3000 dxgmms1 dxgmms1.sys Sat Nov 20 04:49:53 2010 (4CE799C1) fffff880`00c4c000 fffff880`00c60000 fileinfo fileinfo.sys Mon Jul 13 19:34:25 2009 (4A5BC481) fffff880`00c00000 fffff880`00c4c000 fltmgr fltmgr.sys Sat Nov 20 04:19:24 2010 (4CE7929C) fffff880`015a3000 fffff880`015ad000 Fs_Rec Fs_Rec.sys Mon Jul 13 19:19:45 2009 (4A5BC111) fffff880`01800000 fffff880`0183a000 fvevol fvevol.sys Sat Nov 20 04:24:06 2010 (4CE793B6) fffff880`01ad0000 fffff880`01b1a000 fwpkclnt fwpkclnt.sys Sat Nov 20 04:21:37 2010 (4CE79321) fffff880`0494e000 fffff880`0495b000 GEARAspiWDM GEARAspiWDM.sys Mon May 18 08:17:04 2009 (4A1151C0) fffff800`03e09000 fffff800`03e52000 hal hal.dll Sat Nov 20 08:00:25 2010 (4CE7C669) fffff880`043a3000 fffff880`043c7000 HDAudBus HDAudBus.sys Sat Nov 20 05:43:42 2010 (4CE7A65E) fffff880`070d8000 fffff880`070f1000 HIDCLASS HIDCLASS.SYS Sat Nov 20 05:43:49 2010 (4CE7A665) fffff880`070f1000 fffff880`070f9080 HIDPARSE HIDPARSE.SYS Mon Jul 13 20:06:17 2009 (4A5BCBF9) fffff880`070ca000 fffff880`070d8000 hidusb hidusb.sys Sat Nov 20 05:43:49 2010 (4CE7A665) fffff880`07ebb000 fffff880`07f84000 HTTP HTTP.sys Sat Nov 20 04:24:30 2010 (4CE793CE) fffff880`01be7000 fffff880`01bf0000 hwpolicy hwpolicy.sys Sat Nov 20 04:18:54 2010 (4CE7927E) fffff880`04967000 fffff880`04985000 i8042prt i8042prt.sys Mon Jul 13 19:19:57 2009 (4A5BC11D) fffff880`00e5c000 fffff880`00e7d000 jraid jraid.sys Wed Nov 24 22:27:17 2010 (4CEDD795) fffff880`04985000 fffff880`04994000 kbdclass kbdclass.sys Mon Jul 13 19:19:50 2009 (4A5BC116) fffff800`00bac000 fffff800`00bb6000 kdcom kdcom.dll Sat Feb 05 11:52:49 2011 (4D4D8061) fffff880`04218000 fffff880`0425b000 ks ks.sys Sat Nov 20 05:33:23 2010 (4CE7A3F3) fffff880`01505000 fffff880`01520000 ksecdd ksecdd.sys Sat Nov 20 04:21:15 2010 (4CE7930B) fffff880`017a7000 fffff880`017d2000 ksecpkg ksecpkg.sys Sat Nov 20 05:10:34 2010 (4CE79E9A) fffff880`06596000 fffff880`0659b200 ksthunk ksthunk.sys Mon Jul 13 20:00:19 2009 (4A5BCA93) fffff880`071a7000 fffff880`071bc000 lltdio lltdio.sys Mon Jul 13 20:08:50 2009 (4A5BCC92) fffff880`07163000 fffff880`07186000 luafv luafv.sys Mon Jul 13 19:26:13 2009 (4A5BC295) fffff880`00c88000 fffff880`00c95000 mcupdate_AuthenticAMD mcupdate_AuthenticAMD.dll Mon Jul 13 21:29:09 2009 (4A5BDF65) fffff880`07155000 fffff880`07163000 monitor monitor.sys Mon Jul 13 19:38:52 2009 (4A5BC58C) fffff880`04890000 fffff880`0489f000 mouclass mouclass.sys Mon Jul 13 19:19:50 2009 (4A5BC116) fffff880`070fa000 fffff880`07107000 mouhid mouhid.sys Mon Jul 13 20:00:20 2009 (4A5BCA94) fffff880`00e7d000 fffff880`00e97000 mountmgr mountmgr.sys Sat Nov 20 04:19:21 2010 (4CE79299) fffff880`07fa2000 fffff880`07fba000 mpsdrv mpsdrv.sys Mon Jul 13 20:08:25 2009 (4A5BCC79) fffff880`07fba000 fffff880`07fe7000 mrxsmb mrxsmb.sys Tue Feb 22 23:56:22 2011 (4D649376) fffff880`07e00000 fffff880`07e4d000 mrxsmb10 mrxsmb10.sys Tue Feb 22 23:55:12 2011 (4D649330) fffff880`07e4d000 fffff880`07e71000 mrxsmb20 mrxsmb20.sys Tue Feb 22 23:55:12 2011 (4D649330) fffff880`01c50000 fffff880`01c5b000 Msfs Msfs.SYS Mon Jul 13 19:19:47 2009 (4A5BC113) fffff880`01057000 fffff880`01061000 msisadrv msisadrv.sys Mon Jul 13 19:19:26 2009 (4A5BC0FE) fffff880`014a7000 fffff880`01505000 msrpc msrpc.sys Sat Nov 20 04:21:56 2010 (4CE79334) fffff880`031e8000 fffff880`031f3000 mssmbios mssmbios.sys Mon Jul 13 19:31:10 2009 (4A5BC3BE) fffff880`01bd5000 fffff880`01be7000 mup mup.sys Mon Jul 13 19:23:45 2009 (4A5BC201) fffff880`01654000 fffff880`01747000 ndis ndis.sys Sat Nov 20 04:23:30 2010 (4CE79392) fffff880`049de000 fffff880`049ea000 ndistapi ndistapi.sys Mon Jul 13 20:10:00 2009 (4A5BCCD8) fffff880`071bc000 fffff880`071cf000 ndisuio ndisuio.sys Sat Nov 20 05:50:08 2010 (4CE7A7E0) fffff880`04800000 fffff880`0482f000 ndiswan ndiswan.sys Sat Nov 20 05:52:32 2010 (4CE7A870) fffff880`06502000 fffff880`06517000 NDProxy NDProxy.SYS Sat Nov 20 05:52:20 2010 (4CE7A864) fffff880`03181000 fffff880`03190000 netbios netbios.sys Mon Jul 13 20:09:26 2009 (4A5BCCB6) fffff880`0313c000 fffff880`03181000 netbt netbt.sys Sat Nov 20 04:23:18 2010 (4CE79386) fffff880`01747000 fffff880`017a7000 NETIO NETIO.SYS Sat Nov 20 04:23:13 2010 (4CE79381) fffff880`01c5b000 fffff880`01c6c000 Npfs Npfs.SYS Mon Jul 13 19:19:48 2009 (4A5BC114) fffff880`031dc000 fffff880`031e8000 nsiproxy nsiproxy.sys Mon Jul 13 19:21:02 2009 (4A5BC15E) fffff800`0381f000 fffff800`03e09000 nt ntkrnlmp.exe Sat Nov 20 04:30:02 2010 (4CE7951A) fffff880`01243000 fffff880`013e6000 Ntfs Ntfs.sys Sat Nov 20 04:20:57 2010 (4CE792F9) fffff880`01dc1000 fffff880`01dca000 Null Null.SYS Mon Jul 13 19:19:37 2009 (4A5BC109) fffff880`04c7c000 fffff880`04c95000 nusb3hub nusb3hub.sys Thu Nov 18 20:34:24 2010 (4CE5D420) fffff880`043c7000 fffff880`043f8000 nusb3xhc nusb3xhc.sys Thu Feb 10 00:52:33 2011 (4D537D21) fffff880`0659c000 fffff880`065ef000 nwifi nwifi.sys Mon Jul 13 20:07:23 2009 (4A5BCC3B) fffff880`03092000 fffff880`030b8000 pacer pacer.sys Sat Nov 20 05:52:18 2010 (4CE7A862) fffff880`09a00000 fffff880`09a40280 PaeFireStudio PaeFireStudio.sys Fri Jan 21 00:43:08 2011 (4D391CEC) fffff880`09a41000 fffff880`09a49a80 PaeFireStudioAudio PaeFireStudioAudio.sys Fri Jan 21 00:41:38 2011 (4D391C92) fffff880`09a5b000 fffff880`09a63b00 PaeFireStudioMidi PaeFireStudioMidi.sys Fri Jan 21 00:41:33 2011 (4D391C8D) fffff880`00f98000 fffff880`00fad000 partmgr partmgr.sys Sat Nov 20 04:20:00 2010 (4CE792C0) fffff880`00f65000 fffff880`00f98000 pci pci.sys Sat Nov 20 04:19:11 2010 (4CE7928F) fffff880`0106e000 fffff880`01075000 pciide pciide.sys Mon Jul 13 19:19:49 2009 (4A5BC115) fffff880`011ed000 fffff880`011fd000 PCIIDEX PCIIDEX.SYS Mon Jul 13 19:19:48 2009 (4A5BC114) fffff880`01592000 fffff880`015a3000 pcw pcw.sys Mon Jul 13 19:19:27 2009 (4A5BC0FF) fffff880`06400000 fffff880`064a6000 peauth peauth.sys Mon Jul 13 21:01:19 2009 (4A5BD8DF) fffff880`06537000 fffff880`06574000 portcls portcls.sys Mon Jul 13 20:06:27 2009 (4A5BCC03) fffff880`00c95000 fffff880`00ca9000 PSHED PSHED.dll Mon Jul 13 21:32:23 2009 (4A5BE027) fffff880`049ba000 fffff880`049de000 rasl2tp rasl2tp.sys Sat Nov 20 05:52:34 2010 (4CE7A872) fffff880`0482f000 fffff880`0484a000 raspppoe raspppoe.sys Mon Jul 13 20:10:17 2009 (4A5BCCE9) fffff880`0484a000 fffff880`0486b000 raspptp raspptp.sys Sat Nov 20 05:52:31 2010 (4CE7A86F) fffff880`0486b000 fffff880`04885000 rassstp rassstp.sys Mon Jul 13 20:10:25 2009 (4A5BCCF1) fffff880`01c9b000 fffff880`01cec000 rdbss rdbss.sys Sat Nov 20 04:27:51 2010 (4CE79497) fffff880`04885000 fffff880`04890000 rdpbus rdpbus.sys Mon Jul 13 20:17:46 2009 (4A5BCEAA) fffff880`01c35000 fffff880`01c3e000 RDPCDD RDPCDD.sys Mon Jul 13 20:16:34 2009 (4A5BCE62) fffff880`01c3e000 fffff880`01c47000 rdpencdd rdpencdd.sys Mon Jul 13 20:16:34 2009 (4A5BCE62) fffff880`01c47000 fffff880`01c50000 rdprefmp rdprefmp.sys Mon Jul 13 20:16:35 2009 (4A5BCE63) fffff880`01b9b000 fffff880`01bd5000 rdyboost rdyboost.sys Sat Nov 20 04:43:10 2010 (4CE7982E) fffff880`071cf000 fffff880`071e7000 rspndr rspndr.sys Mon Jul 13 20:08:50 2009 (4A5BCC92) fffff880`04c00000 fffff880`04c6a000 Rt64win7 Rt64win7.sys Wed Feb 16 04:03:57 2011 (4D5B92FD) fffff880`06e2b000 fffff880`070c9980 RTKVHD64 RTKVHD64.sys Thu Feb 24 05:19:18 2011 (4D6630A6) fffff880`01b7e000 fffff880`01b9b000 sbp2port sbp2port.sys Sat Nov 20 04:19:21 2010 (4CE79299) fffff880`011be000 fffff880`011ed000 SCSIPORT SCSIPORT.SYS Sat Nov 20 05:34:01 2010 (4CE7A419) fffff880`07e86000 fffff880`07e91000 secdrv secdrv.SYS Wed Sep 13 09:18:38 2006 (4508052E) fffff880`0495b000 fffff880`04967000 serenum serenum.sys Mon Jul 13 20:00:33 2009 (4A5BCAA1) fffff880`03190000 fffff880`031ad000 serial serial.sys Mon Jul 13 20:00:40 2009 (4A5BCAA8) fffff880`01b76000 fffff880`01b7e000 spldr spldr.sys Mon May 11 12:56:27 2009 (4A0858BB) fffff880`01081000 fffff880`011b5000 sptd sptd.sys Sun Mar 22 08:35:35 2009 (49C63097) fffff880`09b43000 fffff880`09bdb000 srv srv.sys Tue Feb 22 23:56:21 2011 (4D649375) fffff880`09ad9000 fffff880`09b43000 srv2 srv2.sys Tue Feb 22 23:56:00 2011 (4D649360) fffff880`041b8000 fffff880`041e9000 srvnet srvnet.sys Tue Feb 22 23:55:44 2011 (4D649350) fffff880`01cef000 fffff880`01d52000 storport storport.sys Sat Nov 20 05:35:02 2010 (4CE7A456) fffff880`09a4a000 fffff880`09a5ad00 STREAM STREAM.SYS Mon Jul 13 20:06:18 2009 (4A5BCBFA) fffff880`0489f000 fffff880`048a0480 swenum swenum.sys Mon Jul 13 20:00:18 2009 (4A5BCA92) fffff880`018cc000 fffff880`01ad0000 tcpip tcpip.sys Sat Nov 20 04:25:52 2010 (4CE79420) fffff880`07e91000 fffff880`07ea3000 tcpipreg tcpipreg.sys Sat Nov 20 05:51:48 2010 (4CE7A844) fffff880`01c8e000 fffff880`01c9b000 TDI TDI.SYS Sat Nov 20 04:22:06 2010 (4CE7933E) fffff880`01c6c000 fffff880`01c8e000 tdx tdx.sys Sat Nov 20 04:21:54 2010 (4CE79332) fffff880`031c8000 fffff880`031dc000 termdd termdd.sys Sat Nov 20 06:03:40 2010 (4CE7AB0C) fffff960`00450000 fffff960`0045a000 TSDDD TSDDD.dll unavailable (00000000) fffff880`04174000 fffff880`0419a000 tunnel tunnel.sys Sat Nov 20 05:51:50 2010 (4CE7A846) fffff880`04c6a000 fffff880`04c7c000 umbus umbus.sys Sat Nov 20 05:44:37 2010 (4CE7A695) fffff880`043f8000 fffff880`043f9f00 USBD USBD.SYS Mon Jul 13 20:06:23 2009 (4A5BCBFF) fffff880`048ff000 fffff880`04910000 usbehci usbehci.sys Mon Jul 13 20:06:30 2009 (4A5BCC06) fffff880`04200000 fffff880`0420d000 usbfilter usbfilter.sys Tue Dec 22 03:26:22 2009 (4B3082AE) fffff880`064a8000 fffff880`06502000 usbhub usbhub.sys Sat Nov 20 05:44:30 2010 (4CE7A68E) fffff880`0420d000 fffff880`04218000 usbohci usbohci.sys Mon Jul 13 20:06:30 2009 (4A5BCC06) fffff880`048a9000 fffff880`048ff000 USBPORT USBPORT.SYS Mon Jul 13 20:06:31 2009 (4A5BCC07) fffff880`07107000 fffff880`07113000 usbprint usbprint.sys Mon Jul 13 20:38:18 2009 (4A5BD37A) fffff880`01061000 fffff880`0106e000 vdrvroot vdrvroot.sys Mon Jul 13 20:01:31 2009 (4A5BCADB) fffff880`01dd1000 fffff880`01ddf000 vga vga.sys Mon Jul 13 19:38:47 2009 (4A5BC587) fffff880`01c00000 fffff880`01c25000 VIDEOPRT VIDEOPRT.SYS Mon Jul 13 19:38:51 2009 (4A5BC58B) fffff880`00fc2000 fffff880`00ffe000 vmbus vmbus.sys Sat Nov 20 04:57:29 2010 (4CE79B89) fffff880`01b1a000 fffff880`01b2a000 vmstorfl vmstorfl.sys Sat Nov 20 04:57:30 2010 (4CE79B8A) fffff880`00fad000 fffff880`00fc2000 volmgr volmgr.sys Sat Nov 20 04:19:28 2010 (4CE792A0) fffff880`00e00000 fffff880`00e5c000 volmgrx volmgrx.sys Sat Nov 20 04:20:43 2010 (4CE792EB) fffff880`01b2a000 fffff880`01b76000 volsnap volsnap.sys Sat Nov 20 04:20:08 2010 (4CE792C8) fffff880`030b8000 fffff880`030ce000 vwififlt vwififlt.sys Mon Jul 13 20:07:22 2009 (4A5BCC3A) fffff880`031ad000 fffff880`031c8000 wanarp wanarp.sys Sat Nov 20 05:52:36 2010 (4CE7A874) fffff880`01c25000 fffff880`01c35000 watchdog watchdog.sys Mon Jul 13 19:37:35 2009 (4A5BC53F) fffff880`00eb2000 fffff880`00f56000 Wdf01000 Wdf01000.sys Mon Jul 13 19:22:07 2009 (4A5BC19F) fffff880`00f56000 fffff880`00f65000 WDFLDR WDFLDR.SYS Mon Jul 13 19:19:54 2009 (4A5BC11A) fffff880`03089000 fffff880`03092000 wfplwf wfplwf.sys Mon Jul 13 20:09:26 2009 (4A5BCCB6) fffff960`000b0000 fffff960`003c2000 win32k win32k.sys Wed Mar 02 22:51:40 2011 (4D6F104C) fffff880`00e97000 fffff880`00eab000 winhv winhv.sys Sat Nov 20 04:20:02 2010 (4CE792C2) fffff880`041af000 fffff880`041b8000 wmiacpi wmiacpi.sys Mon Jul 13 19:31:02 2009 (4A5BC3B6) fffff880`011b5000 fffff880`011be000 WMILIB WMILIB.SYS Mon Jul 13 19:19:51 2009 (4A5BC117) fffff880`07186000 fffff880`071a7000 WudfPf WudfPf.sys Sat Nov 20 05:42:44 2010 (4CE7A624) Unloaded modules: fffff880`09a7c000 fffff880`09abd000 Unknown_Module_fffff880`09a7c000 Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00041000 fffff880`09ac6000 fffff880`09ad7000 STREAM.SYS Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00011000 fffff880`09abd000 fffff880`09ac6000 PaeFireStudi Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00009000 fffff880`09bdb000 fffff880`09be4000 PaeFireStudi Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00009000 fffff880`09a00000 fffff880`09a71000 spsys.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00071000 fffff880`01d52000 fffff880`01d60000 crashdmp.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 0000E000 fffff880`01d60000 fffff880`01d6c000 dump_ataport Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 0000C000 fffff880`01d6c000 fffff880`01d75000 dump_atapi.s Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00009000 fffff880`01d75000 fffff880`01d88000 dump_dumpfve Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00013000




This was my first PC build and everything went well except for installing Windows 7.
I am clean installing Windows 7 Professional 64bit.
My BIOS is able to detect all my hardware (2 harddrives, dvd rom drive, dvd burner, 4 sticks of ram 2gb each, etc.)
Hard drives are in RAID1

While I am installing Windows 7 Professional 64 bit I get up to the point where it is installing Expanding Windows Files and it says 0%... and stays there. It has been hanging at 0% for 20 minutes and I tried to find out why. One source said to only have 2 sticks of RAM in when installing windows 7 and then put the other 2 sticks in after.

Currently I have 2 2GB sticks of RAM in my computer. What do I need to do so I can get passed the Expanding Windows Files installation? Could it be my windows 7 disk? I have it burned onto a DVD and it runs perfectly up to that point.

Here are my system specs:

CPU
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor
Newegg.com - Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor - Processors - Desktops

Mother Board
ASUS P7P55D PRO LGA 1156 Intel P55 ATX Intel Motherboard
Newegg.com - ASUS P7P55D PRO LGA 1156 Intel P55 ATX Intel Motherboard - Intel Motherboards

Hard Drive
Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive
Newegg.com - Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive

Memory
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory
Newegg.com - G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL7D-4GBRH - Desktop Memory

Graphics Card
SAPPHIRE 100282SR Radeon HD 5850 1GB 256-bit GDDR5 PCI Express 2.0 x16
Newegg.com - SAPPHIRE 100282SR Radeon HD 5850 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card w/ATI Eyefinity - Desktop Graphics / Video Cards

Power Supply
Antec EarthWatts EA750 750W Continuous Power ATX12V version 2.3
Newegg.com - Antec EarthWatts EA750 750W Continuous Power ATX12V version 2.3 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC "compatible with Core i7/Core i5" Power Supply - Power Supplies

DVD ROM and DVD+R
Newegg.com - LITE-ON Black 18X DVD-ROM 48X CD-ROM SATA DVD-ROM Drive Model iHDS118-04 - CD / DVD Drives

Newegg.com - PLEXTOR Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 24X DVD/CD Writer LightScribe Support - CD / DVD Burners

Internal Card Reader
Newegg.com - Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader w/ USB port / Extra silver face plate - Card Readers

NZXT Lexa S case
Newegg.com - NZXT LEXA S LEXS - 001BK Black Steel ATX Mid Tower Computer Case - Computer Cases




Hi!

It seems I've gotten myself into quite the mess here.

I am trying to relocate my Users folder into another HDD to save space on my OS HDD by using this guide: Move the Users Directory in Windows 7

I am currently inside cmd on the Win7 Ultimate Edition(x64) DVD and have executed the following commands with some edited results next to them:

robocopy /copyall /mir /xj D:Users C:Users
"Directories skipped: 51 Files failed: 1"
(Cmd interpreted my C: drive to be the D: drive and my target HDD to be C: in recovery mode)

robocopy /copyall /mir /xj D:Users C:Users
"Directories skipped: 2114 Files failed: 1"

Giving up on the 51 folders and the 1 file, I continued:

rmdir /S /Q D:Users
"D:Users*MYUSERNAME*AppDataRoamingRealUpdateUPGRAD~1 - The directory is not empty

dir D:Users*MYUSERNAME*AppDataRoamingRealUpdate
"Volume in drive D has no label."etc.
(1 DIR found --- UpgradeHelper)

dir D:Users*MYUSERNAME*AppDataRoamingRealUpdateUpgradeHelper'
"File Not Found"

chkdsk /f D:
"Windows has checked the file system and found no problems."
"Failed to transfer logged messages to the event log with status 50."
(Chkdsk did not help getting rid of the offending folder/file.)

I have decided to not leave command prompt until I have gotten some solid advice on this issue. Thank you in advance and I hope for speedy replies as I am stuck in recovery mode.
Posting from someone else's computer. ^^




Hi
New HP Laptop with Windows 7 - Windows Backup software doesn't recognise DVD as writeable, but Windows7 Explorer writes just fine to the same DVD-R.

If I do
Control Panel>System and security>Backup and Restore
click on Backup Now
....this gives "Backup in progress..." bar - gets to about 25% and stops with the message
"Insert Removeable media
"Windows backup needs a CDDVD or USB drive to continue" (even though there is a DVD-R in E:, to which I have just successfully burned a very small test file using Explorer. E: shows on Backup pane as being selected as destination drive).
If I click on "More information" another dialogue box pops up with instructions to
"Label and insert a blank media
"Please write the following label on a blank media and insert it into E:
"FREDDY 02/01/2011"
even though there is a labelled disc in there.
(Of course that's a bum instruction from Windows anyway - it won't accept forward slashes - but that's OK - I label it without those. Still doesn't work.)

If on the other hand I just select a file in Explorer and burn it ends up on the DVD no problem. With that same successfully burned DVD - Backup will still not recognise the DVD-R.

I can use a DVD-R with a small test file burned OK to it, or a virgin disc from the box - makes no difference......

Hope someone can help.....!


Page 9 of 32.
Results 161...180 of 624