event errors Results

Page 18 of 50.
Results 341...360 of 1,450

Sponsored Links:

I have a worksheet where I keep track of certain events that I have scheduled. The worksheet covers scheduling of events in 13 locations, and allows me to schedule 11 items per day. It is easier to put all 13 locations on a single worksheet, than to create 13 separate worksheets.

I have a worksheet-change code (courtesy of Don Wells, a big contributor to these forums) that I took from another workbook I made a couple of years ago. This is how it works: I have dates (Jan 1-Dec 31st) in col C and data in 6 adjacent columns in row 5 (eg: H5:M5). In col N5, I can enter a date and it will 'move' the data from H5:M5 to another row (eg: H27:M27)and erase the data from the 'old' date (row 5). There are 2 parts to the code and I am attaching a sample xls file to illustrate things, including the code. It works fine when I only have a single location ("Location #1).

However, I have 13 locations, with 11 line items/day. "Location #2" has its data in columns S:X and I want to use col Y to move Location #2 data from one date (eg: Jan 4) to another date (eg: Jan 24). I copied the code for Location #1 and changed the ranges accordingly. Then, I went onto Location #3, which has its data in columns AD:AI, and I want to use col AJ to move the data for Location #3.......and so on and so on....for all 13 locations. As with Location #2, I copied the same code for Location #1 and changed the ranges to correspond with the proper ranges found in Location #3.

Here is the problem: I have named the functions as Worksheet_Change, and you will see reference to a function called "Postpone"..........when I copy the code I am using for Location #1 and use it for Location #2 (and changing the columns appropriately), or do the same for Location #3, nothing works anymore.

I get an error message about an ambiguous name and I think it is because the functions have the same 'name' (even though the cell ranges are different for each location and event).....my question is whether it is possible to give these worksheet change events different names? I have tried to call them Worksheet_Change1, Worksheet_Change2...or Worksheet_Change_1 and Worksheet_Change_2, but I think that putting a 1 or a 2 into the name prevents the function from running.

If need be, I suppose I can make 13 worksheets (one for each location) and use the worksheet_change event code in each, but it is much more convenient to users to be able to have all 13 locations on a single worksheet. Any ideas, suggestions??..thank you.

I have a sheet that is using the Change Event of the sheet to determine if a cell is altered.

If a certain cell is altered, then the value is used as part of a fill routine on the same sheet.

This is fine, BUT, the change event also seems to be triggered when a cell is changed using VBA code as well.

Is there anyway to stop the change event being triggered when a cell is altered using code ?

I thought that comparing against the target would fix the issue, but it doesn't.
Suppose the original target cell was C12
This triggers the event and I test in the code that target is C12.

Later I change C13.
This appears to trigger the event.
All would be OK except the target is still returned to the procedure as C12.

OK I thought, turn of Automatic Recalc at the start of the process.

It all appears to be ok, but the routine is called recursively as far as I can see
(with the same Target each time)
I put in an error trap and this stopped it looping continuously, but it is still slow to execute
due to the repetition.

OK, I could get the users to enter the value and then press a button but that isn't what was requested.

Any ideas?

OR do I learn to live with something that works OK, but I've had to use a work around.

I am more than happy to be both educated and enlightened.

If the actual code would be useful, I can post that in another e-mail.


I've never been able to get the New Mail event to trigger code in any version of Outlook, even though I think I am carrying out all the steps correctly. Office 2007 has this sample which it says to paste into a Class Module; I did this and it STILL DOESN'T WORK even though it is Microsoft's own example. How can this be?
Public WithEvents myOlApp As Outlook.Application

Sub Initialize_handler()
Set myOlApp = Outlook.Application
End Sub

Private Sub myOlApp_NewMail()
Dim myExplorers As Outlook.Explorers
Dim myFolder As Outlook.Folder
Dim x As Integer
Set myExplorers = myOlApp.Explorers
Set myFolder = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFo lderInbox)
If myExplorers.Count 0 Then
For x = 1 To myExplorers.Count
On Error GoTo skipif
If myExplorers.Item(x).CurrentFolder.Name = "Inbox" Then
Exit Sub
End If
Next x
End If
On Error GoTo 0
End Sub


Here's one that really puzzles me.

Got a .dot-file - placed in startup folder.
Once it launches it builds a menu point available on application level.

In the .dot file there are AutoExec, AutoOpen and Autonew procedures. (All sub MAIN and then some code going to other subs)
For some reason, whenever I open an ordinary Word file it causes an error with the message "The command cannot be performed because a dialog box is open. Click OK, and then close open dialog boxes to continue"

The odd thing is - no dialog boxes are open. Word has been shut down completely prior to opening the doc and I have inserted msgboxes in the sub MAINs for debugging purposes and this event seems to fire before the AutoExec main - which means that as far as I know - none of my code has been triggered at this stage.

Unfortunately the first error dialog box doesn't offer debug facilities only an "End" option.

So my question is: What events that my code trigger are fired prior to the AutoExec?


In a Word VBA userform, we have set the combo box (cbo) to require a match as we don't want the user to select anything other than what is in the list. However, we do want them to be able to type to be able to quickly find the entry in the list. Unfortunately, if they type something that doesn't match, they get the Microsoft 'Invalid Property Value' error. We would like them to get a more meaningful error message, such as 'Please select an entry from the list." We have tried trapping the error to no avail, and have tried using the Exit event when exiting the combo box to see if the value matches something in the list. This works, and will bring up the message box we want, but then it won't set the focus and select the text in the combo box afterwards. The code we are using is:

Sub cbo_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If cbo.MatchFound = False Then
MsgBox "blah blah"
With cbo
.SelStart = 0
.SelLength = Len(.Value)
End With
End If
End Sub

And the various MS fixes provided. Got the DST fix for the O/S, then ran the time zone changer for Outlook. All seemed to work until...

I can't open any of my recurring events -- they all cause this error:

"Can't open this item. The operation failed."

I can open non-recurring events, but I can't right click on *any* calendar appointment, recurring or not. Well... I *can* right click, but nothing happens -- no context menu. I can delete (error there saying it might not have completely removed the item). But scheduling a new item doesn't work -- the new one also can't be opened. Running detect and repair doesn't work -- says it completes successfully, but did not affect above symptoms.

Fallout from the fixes? It's too coincidental to be anything else. Has anyone else had similar issue?


Outlook hangs when moving from message to message in the In Box or from the In Box to the Calendar. I have run Scanpst several times. Rebooted seveal times. I looked at Event Viewer/Applications and found the errors. The description is different for each error and is unintelligible to me. For example the most recent description reads:

"The description for Event ID ( 0 ) in Source ( Broadcom ASF IP and SMBIOS Mailbox Monitor ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: !ERROR 53 Refreshing BMAPI data."

The prior description reads:
Fault bucket 467407681.

Prior to that:
Hanging application OUTLOOK.EXE, version 11.0.8169.0, hang module hungapp, version, hang address 0x00000000.

Prior to that:
Fault bucket 467407681

The first error description was:
Hanging application OUTLOOK.EXE, version 11.0.8169.0, hang module hungapp, version, hang address 0x00000000.

Trying to delete an event is not very intuitive. Finally found out with trial and error.
1. Double-click (left button) on the event.
2. In upper right hand corner, right-click on the X and Delete option will appear in lower right of screen.
3. Click delete and click delete again.


Bought this PC at Microcenter about 2 years ago. All was well until recently when I am getting the Not running genuine windows error. I had a problem with a keyboard recently and had to do a system restore from about 2 weeks back.
I've pasted the mga diagnostic below. How can I fix it?
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {CBBC9EBB-ADCF-4049-8FB1-22366DB5095B}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.110622-1506
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:Program Files (x86)Mozilla Firefoxfirefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: {CBBC9EBB-ADCF-4049-8FB1-22366DB5095B}1.9.0027.06.1.7601.2.00010300.1.0.003x64*****-*****-*****-*****-7QJB700359-OEM-8992687-000062S-1-5-21-2086857786-1397154865-1144760544GatewayDX4831American Megatrends Inc.P01-A020091117000000.000000+000FB023407018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT109
Spsys.log Content: 0x80070002
Licensing Data-->
On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a 0x800700C1' to display the error text.
Error: 0x800700C1
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x0000000000000040
Event Time Stamp: 3:10:2012 19:25
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%system32sppcext.dll|sppcext.dll.mui

HWID Data-->
OEM Activation 1.0 Data-->
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
SSDT DpgPmm CpuPm

Any ideas on how to fix it?

I am not an Administrator - just a simple user

What does a user need to know about Event Viewer, especially Errors and Warnings sub folders?

In my case, I observe in my Event Viewer logs, a few errors right from the day I purchased my pc, and a couple have date stamp from even before the purchase date.

In my Summary of Events log I observe 271 Errors and 77 warnings in the last 7 days.

Should I be concerned?

Trying to open Event Viewer in Win 7 64 bit. Error Msg is (MMC could not create the snap-in).
More detail follows: FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
Could not load file or assembly 'System.ServiceProcess, Version=, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The module was expected to contain an assembly manifest.
Exception Type: System.BadImageFormatException
Exception Stack Trace:
at Microsoft.Windows.ManagementUI.CombinedControls.Co mmonUtils.CheckIfWindowsEventingServiceIsRunning()
at Microsoft.Windows.ManagementUI.CombinedControls.Ev entsNode.SetActionsForNode()
at Microsoft.Windows.ManagementUI.CombinedControls.Ev entsNode.GetRootNode()
at Microsoft.EventViewer.SnapIn.MMCRootNode..ctor(Str ing remotecomputerName, String userDomain, String userName, SecureString encryptedPassword)
at Microsoft.EventViewer.SnapIn.EventViewerSnapIn.OnI nitialize()
at Microsoft.ManagementConsole.SnapInBase.Initialized ()
at Microsoft.ManagementConsole.Internal.SnapInClient. Microsoft.ManagementConsole.Internal.ISnapInClient .Initialize(ISnapInPlatform snapInPlatform)
at Microsoft.ManagementConsole.Executive.SnapInInitia lizationOperation.OnStart()
at Microsoft.ManagementConsole.Executive.RunningOpera tionsTable.EnqueueOperation(Operation operation)
at Microsoft.ManagementConsole.Executive.StandAloneCo mponentData..ctor(SnapInRegistrationInfo info, Int32 bookkeepingId)
at Microsoft.ManagementConsole.Advanced.FrameworkSnap InFactory.Microsoft.ManagementConsole.Advanced.ISn apInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)

I have run a full virus scan - 0 problems.
I have run scannow - some bad tracks but problem not resolved.
I have searched the net and found different suggested solutions - to no avail.
Microsoft is no big help either.

Any help would be greatly appreciated.

Thank you

I am not sure whether this is the correct forum, but I'll try.
My harddrive has 3 partitions C,D and E. All I have on E is a Disk Image of my C drive which I then back up to another computer so I always have a full version back up of everything. This saved me a couple of months ago when this computer was totally wiped out. I was able to install XP and then transfer the image from the old computer bringing everything back.
But!! Everytime I boot this computer I hear two small sounds and the system event log has the following message:

The server service was unable to recreate the share Disk Image because the directory Eisk Image no longer exists. Please run "net share Disk Image /delete" to delete the share, or recreate the directory Eisk Image.

Eisk Image does indeed exists. It is now my latest back up. I have tried to run the "net share Disk Image/delete", but this command is unknown and results in nothing.

Does anybody have an idea what this is about?

I never had this problem before and when i do i usually Google my way out of it. However I think Microsoft screwed me up more. After getting my computer back from repair in the event log I was getting
this sidebyside error "resolve partial assembly failed for Microsoft vc80crt the reference assembly is not installed on your system", error 59. I checked and the web said i needed to install Visual c++ redistributable -x86 either 2008 or 2010. I have windows xp sp3 professional so i thought i needed to down load 2010. So anyway the next day I look in add and remove and i have two versions of the visual C++ 2008 redistributable-80 already installed, so i say good, although i didn't download this and i don't know how it got there but it's fixed? Wrong, next i started to get this error again sidebyside error "dependent assembly Microsoft vc80 crt could not be found and is not installed on your system error 59. OK hum, I look into it some more and i go into add and remove and now i also have installed visual C++ 2010 redistributable-80 installed and again i didn't do anything. I go up to the web Google and it says to try and reinstall 2010 so I try it and nothing? Here's the problem i know this is too much information and am editing this. No post shows what to do if installing these visual products on your computer don't fix the problem. I also learned that it's a microsoft software that needs this to work.

I rely on event viewer fairly often. I haven't turned off any services that might be required to make it run, but I did increase the size of the logs to 704 kb. Now when I go to it, the events are gone. When I open it up, it lists the size of records,but will not actually show them when I click on services and applications. I get an error message:
__________________________________________________ ____________________________

"Unable to complete the operation on Sytems/Application. If I click on System or Application. The Interface is Unknown."
__________________________________________________ ____________________________

I didn't right click refresh it or do anything to restart or clear the log. From help, I see a suggestion that if Windows XP stops, you can recover (but in this case you log the events and don't lose them) by doing this at the following key:

1.. HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlLs a
2.. Delete and replace the CrashOnAuditFail value, using data type
REG_DWORD and a value of 1.
3. Reboot.

Does anyone know how I can fix Event Viewer, preferably recover the events that are gone; but if not, get it functioning. Is there anything I can do to help by reregistering it in the run box?


So the way my dad explains his problem is like this, for his father, my grandad. He says he put a disk in his computer to transfer some files onto his desktop & then from there onto another disk. In WIN explorer he selected the file & clicked copy, he got distracted then somehow & a few minutes later resumed his work, but he wound up clicking COPY against the same file, the original he was going to copy to his desktop. Apparently since then he's been unable to copy stuff anymore he gets a FILE STRUCTURE 1260 error. Could someone explain what might be the problem I looked on the MSDN www site but only came up with the below which isn't very descriptive or helpful to solve the problem. I'd appreciate any help, please advise.



I'm stumped and can't find help on the Microsoft KB. Maybe you magicians can help...

I started getting some "connection" errors in the last couple months (no, I am too much of an idiot to have been able to recall anything "new" I installed or changed prior to the onset of this problem - I think it took me weeks to realize there was a problem - the problem doesn't show itself very often)

There are several "connection" type programs that "choke":
1) IE5 setup/update (iesetup.exe, 2 different downloads) -
The installation starts, it's initialized, it predicts "Windows 2000 Install - 60MB" - then -
"Setup was unable to download information about the available installation sites. Setup may have been unable to use your current proxy server settings...."
2) Copernic Basic - it has been working until I uninstalled and reinstalled - now...
"An error occurred while retrieving update information..."
3) Napster
It generates an error immediately (before I could scroll through the "I accept...") - but it seems to be "connecting..."
4) Norton Live Update
It generates a message about "firewalls" as soon as it tries to connect
5) TV Guide browser by NeoPlanet
Launches, shows "This page cannot be displayed" for all pages, and then in 3 minutes generates an error...

But there's LOTS that DOES WORK - heavy surfing, file downloading, FTP up and downloads, web publishing from NetObjects Fusion, ICQ, Citrix

The system has Windows 2000 Pro, DSL via a NetGear router and a LinkSys switch, no firewall or internet filtering, "medium" security in IE5.1 w/ SP1

The "events log" / "applications" shows the following message (they all seem to be the same) -
"The description for Event ID (1) in Source (True Vector Service) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event."

The "data" that follows the above message is:
"OpenProcessError 87 on process ID xxxx" where "xxxx" changes -
3304 for Copernic
3352 for Napster
3300 for NeoPlanet
[It certainly seems that the "OpenProcessError 87" should have found a hit on the MS KB]

Any ideas?


True Vector Service is done by Zone Alarm - I didn't like it and "turned it off." But it left BIG footprints, and ran 2 services automatically anyway. A few minutes with RegEdit and it doesn't anymore!

I've discovered I am getting the following errors in my Event Viewer every time I log-off:

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1000
Date: 11/05/01
Time: 14:27:25
Computer: WK01
Windows cannot unload your registry file. If you have a roaming profile, your settings are not replicated. Contact your administrator.

DETAIL - Access is denied. , Build number ((2195)).

I can find two references in the MSKB:
Q269858 Msinfo32.exe Causes Userenv Event ID 1000 on Localized Version of Windows 2000:
You may receive Userenv event ID 1000 in the Application log when you run Msinfo32.exe in a certain way. The text of event ID 1000 is:
Windows cannot unload your registry file. If you have a roaming profile, your settings are not replicated. Contact your administrator.
DETAIL - Access is denied. , Build number ((2195)).
Winmgmt.exe does not release a handle to a registry key; Winlogon.exe cannot unload the user profile and logs the error in the event log.

Well, I don't run MSInfo32 in any way - but it does refer accurately to the build number, so may be more apt.
The 'hot-fix' for this appears to result in a file (Winmgmt.exe) but I appear to have the correct version of this anyway.

This has all come to light following my discovering I can not publish to a specific site using FP and there were poimters to a problem accessing the registry. I'm not using a roaming profile, but I think that is irrelevant. But I think this is the reason W2K takes about 2 minutes 'saving my settings' when I reboot.

Anyone got any smart ideas about how to resolve this?

I have experienced some problems when trying to start certain Networking services. I think this may be partly because of some startup errors I have. Even if it isn't, I would like to get rid of these erros and would appreciate any help.

I think I got rid of the man error, that snmp wouldn't start (probably caused most of the problems.)
I still have

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7003
Date: 6/17/2001
Time: 12:19:30 AM
User: N/A
Computer: DRASTIC
The Distributed File System service depends on the following nonexistent service: LanmanServer

I also dont like these warnings
The SNMP Service is ignoring extension agent key SOFTWAREMicrosoftWINSMibAgentCurrentVersion because it is missing or misconfigured.


The SNMP Service is ignoring extension agent key SOFTWAREMicrosoftDHCPMibAgentCurrentVersion because it is missing or misconfigured.

Thank you

I've been getting IE script messages for a few days now, every since I did some "cleaning up" with SystemSuite Professional 11. At least evidence points to that being the trigger event, since they didn't appear before that point.
I'm using Windows XP Pro SP3 and IE8
I've tried the usual solutions offered by Microsoft - disabling prompts for ActiveX scripts, settings under the Advanced tab, etc. But all the options suggested were already set to prevent the messages I've been getting.
I get the messages on any and all websites - including one for work that I use daily, and having to click OK before every action on that particular page is aggravating, to say the least.
Here's a sample message:

Hopefully this is something simple I've overlooked - a little-used setting that was changed, perhaps. Just as long as I don't have to do a Windows repair install - I hate that!

Note: I noticed that this example is from a secure site - I've gotten it on Facebook as well, and I do have that set as a secure connection. Other sites where I get this, I doubt they are secure sites - but it is something I will try to keep track of in case that might be the common thread.

I have a switchboard that has a Edit Record button. When the Edit Record button is clicked in call frmCheckInEdit. The operator is instructed to enter the receipt number. The On Open event on frmCheckInEdit is as follows:

Private Sub Form_Open(Cancel As Integer)
Dim strWhere As String
strWhere = "ReceiptNumber=[Enter Receipt Number]"
DoCmd.OpenForm "frmCheckInEdit", acNormal, , strWhere
End Sub

I am new to error handling and need to add an error handling routine that will tell the operator that an invalid receipt number was entered. I think it would be nice to give the operator the option of entering a new receipt number or returning to the Main Menu.

Tom Goodwin

Page 18 of 50.
Results 341...360 of 1,450