windows cannot set up a homegroup on this computer Results


Page 1 of 2.
Results 1...20 of 22

Sponsored Links:



I have 3 computers on my network running Windows 7.

I created a homegroup on one, and successfully connected to it from another.

On the third computer, however, I'm having some problems. If I try to join the homegroup the normal way, I get the message "Windows cannot set up a homegroup on this computer".

I checked into it, and found out the "Peer Name Resolution Protocol" service needs to be started for the homegroup to work properly. When I try to start it, I get this error:

(Error 0x80630203)

This computer is running 7 Ultimate x86, upgraded from Vista Home Premium x86.
The computer that created the homegroup is running 7 Ultimate x64 upgraded from Vista Ultimate x64
The other computer that connected to the homegroup successfuly is running a fresh install of Windows 7




I have tried to set up a HomeGroup on my 15 month old Windows 7 desktop computer, but when I click on homegroup in Control Panel I get the message "this computer cannot connect to a home network group - try later". I have run the troubleshooter and disabled my zone alarm firewall but to no avail. I have successfully set up the homegroup on my laptop using the same method, but the homegroup software on the desktop machine just will not load.




I have a Win 7/64 7100 and a Win 7/32 7100. My 64 bit platform set up the homeGroup just fine.

My 32 bit Dell Dimension 4700 4 GB ram, after some time, displays the error message "Windows Cannot Setup HomeGroup on This Computer" I ran the networking troubleshooter and the HomeGroup troubleshooter on both platforms. The only suggestion was having the correct time on both computers. That was OK.

I went into Advanced Sharing and set the discovery on, file & printer sharing on, and password protected sharing off.

I adjusted both machinge with the settings. That didn't help.

I really like Win 7, but I need networking.

Any suggestions?

Dennis




After one hour with MS help today, I have been unable to get my Win8 computer to network with my Win7 computer. The MS "helper" was completely useless. He repeated the same things many times, getting the same results (failure) each time, so I gave up, not wanting to do another 5h 40m marathon. Maybe someone here will have a good suggestion.

Both computers are able to see the name of the other computer, but cannot connect. Both are wired to a router that also has my Linux machine. The Linux machine can find and communicate with the Win7 machine. Before installing Win8, the computer that now has it was able to easily exchange files with the older Win7 machine.

After finding the Win7 machine, my Win8 machine says it "cannot access" it. I get this error:
0x80070035
I also get the message "the remote device won't accept the connections."
I tried "set up a network." It says it may take 90 seconds to find and list something (probably the existing network as defined on the Win7 machine). At that point nothing happens. Not in 90 seconds or 30 minutes.
I tried the "troubleshoot" feature. It doesn't find anything or report anything.
I tried various online tutorials, but they led me to make selections that do not exist on my screen.
When I go to the Metro screen and type in "homegroup" it finds nothing! I thought that term was a MS term and that it was supposed to be a real feature.
The control panel finds homegroup. I select "join now" and enter the password. Then Windows 8 says "Windows no longer detects a homegroup on this network." It tells me to click OK, then open homegroup in the control panel. That option does not appear when I click OK.

I also searched here for networking discussions, but none seemed to address the problems I have experienced.
Any suggestions?




Hey everyone

I have a desktop and there are quite a few computers in the house, i created a homegroup on the desktop, and the other desktop and two wireless laptops connected to it. It was extremely easy to set up. all using windows 7 beta build 7100

But.. recently i was trying to set up a homegroup to transfer files from one laptop to another but i could not get them to detect eachother. The only difference between the two is The dell is the beta 7100 build ultimate version completely updated, and the toshiba is windows 7 home premium completely updated. They both have the ability to create and join homegroups though. I have tried creating a homegroup on one laptop, it creates successfully, but then the other laptop scans and tries to connect, it detects that there is a homegroup for a split second, and states that it cannot connect to the homegroup. Then it dissapears and says that there are no homegroups to connect to.

I have tried creating homegroup on both computers but i just cant get it to work. I have created quite a few homegroup networks and no issues until these two laptops.

The only difference between these laptops and the other computers i have set this up on is that one is beta and one is official, The other computers in my home i set this up on are all beta.

Could this be the problem, it is the only thing that makes sense but i wanted to get some input from someone else.

Thanks




When i was using Beta and RC, i just follow the on screen instructions and easily set up a home network.

I just upgraded to RTM, and now homegroup won't let me create.

When i click create home group, and check some boxes, i get an error saying

"windows cannot set up homegroup on this computer"

WHY?!?

any help appreciated.




I have 5 PCs all running Win7 Home Premium or better, on a router that is not connected to the internet. I am using a "regular" network to share files among all of them (in their public folders). Every computer can share files with the others, except one. The "bad" one can be seen be the others, but I cannot open anything in it. I have every control panel setting that I can find set exactly the same as the rest, but I keep coming up with a "Windows Security - Enter Network Password" dialog. All 5 machines have the identical workgroup name assigned.

The bad one can see the other PCs, but likewise cannot open anything on them - I just get that dialog.

I have not tried using a "homegroup" though every computer tells me it has joined one. I didn't do that.

As a last resort, on the "bad" PC I joined the homegroup it keeps talking about. Now, at least one other machine is seeing it twice! (but can't get past that dialog on either).

I also turned the firewall off entirely on the "bad" PC; didn't help.

What's going on? How can I fix this? I am not entirely clear on how to set up a homegroup and am not sure I should need to.

THANK YOU in advance for your thoughts on this.

Steve




I have been through multiple forums and tried everything I can think of to fix this problem. I am setting up a new home network with 4 computers (3 laptops and 1 desktop). 2 Laptops are running Windows Vista connecting via wireless, 1 laptop running Windows 7 connecting via wireless, and the Desktop is running Windows XP connecting via hard wire to the wireless router. My ultimate goal is to allow all 4 computers to print to one printer connected to the desktop.
Currently, the 2 Vista computers and the desktop with XP can see all 4 computers on the network and all 3 print just fine.
The problem, the laptop running Windows 7 can only see itself and the 2 computers running Vista. I can "Ping" the XP computer from the Win7 Computer, but I cannot get it to recognize the XP computer. I have changed my home/work settings on the Win7 PC to allow for sharing, lowered encryption requirements, turned off firewalls (for testing), verified workgroups are identical, made my wireless connection a "work" connection, and deleted any "homegroups". I may have done a few more things but I can't remember them off hand.
I am not sure what else to try. Any help would be appreciated.
Thanks
Andrew G




Hello Everyone, I've been a long time browser of this forum and finally got a problem worthy of your help.

Anyways, I'm trying to setup a Windows 7 network sharing. But the main problem is when I go to explorer and network, I can see all the host names of my computer in my home group. Unfortunately when I try to browse the computer it gives me the error

"Windows Cannot access foo" Check Spelling of the name. Otherwise there might be a problem with your network. To try and identify problems, click diagnose.

I've tried diagnosing to no success.
Here's my network settings.

Router: 192.168.0.254
foo: 192.168.0.100 - DHCP
and desktop trying to connect to foo: 192.168.0.102- DHCP

Further investigations shows that when I right click on the network hostname from the network map. The media tab allows me to see the ip. But the file sharing tab doesn't have a properties option. So I can not check the IP. With that being said, if I type in 192.168.0.100 (IP of 'foo' computer) the file sharing utility opens up and shows me all the shares on he foo computer with proper permissions. After that I though to check if media sharing worked via hostname, to my surprise it worked flawlessly. So my problem is somewhere correlated with the hostname and network sharing. I've gone end to end looking for the problem for many days now but being a native Linux person. I am unable to solve the problem.

Additional Information is, I am running a homegroup on the same network. Which the homegroup worked flawlessly too. Not sure if that could make a difference the though of interference crossed my mined for a second. Also both my computers are running with identical user setups, not sure if that could be anything either. But they both use the same windows username and password. Oh and while diagnosing I was instructed to remove I had an error with windows live sign in assistant, which I did. I reinstalled using 6.5 beta. But not positive if this is relevant information.

Any help is greatly appreciated.




I have set up a wi-fi network. My laptop has Win 7 home basic version. My desk top runs on XP and is hard wired to the wi-fi router.. I have used a belkins G level wi-fi router... all the laptops and the desktop are able to access the internet...
1. My WIN7 laptop is able to access my XP-desktop shared drives..
2. Also, my XP desktop can only see the WIN7-laptop under the "view workgroup computers" but is unable to access its shared folders.. when i click on it it says acess denied...
3. The XP machine cannot see the shared drives/folders of Win7 PC under the "my network places". (I have shared D: drive and also a folder from C: drive of my Win 7 machine)
4. I have also done the following things after researching on the internet but to no avail-
· Done- Control Panel > Network and Internet > Network and Sharing Center > Change Advanced Sharing Settings (side panel). Make sure Network Discovery, File and Printer Sharing, and Public Folder Sharing are all set to “on” and Password Protected Sharing is set to “off”.
· Done- Confirm all computers are in the same workgroup.
· Done- Advanced Sharing options set to have the following enabled:
o Network Discovery
o File and Printer sharing
o Sharing so anyone can read/write files to public folders.
o 128 bit encryption (perhaps this is an issue? Perhaps it should be set to 40 bit encryption?)
o Allow Windows to manage homegroup.
o XP machines are set to not use Simple File Sharing.
· Done- Because Password Protected Sharing turned off, the security permissions have to be changed on the folder(s) to allow everyone access. Right-click the shared folder > Properties > Security Tab > Edit > Add and type “Everyone” (not the quotes) into the box and select OK. Tick the boxes next to the permissions you want to allow (e.g. Read or Write, etc.) then Apply > OK. Some messages may appear: “An error occurred while applying…” This is not unusual and can be ignored by clicking Continue.
· Done-Windows firewall is normally set to allow file and printer sharing but if you have a third-party firewall make sure file and printer sharing are enabled so that each machine can talk to the other(s). Do not disable the Windows firewall if it’s the only one running...
· Done- make registry changes
Please help me with this.. i am really losing my mind over it...
thanks a lot...




Two weeks ago I installed Windows 7 Professional for a friends daughter on her laptop . The purchase was from Microsoft's deal for students. The previous version was Vista, I did not do an upgrade, did full install. All went well, I installed the security programs, connected using the wireless connection, did all the updates. Everything worked great! She picked up her laptop and went to her mom's and I got a call saying she could not connect. I tried every suggestion possible and it would not connect! Her mom is on UVerse same as me, same gateway, same settings. She took it home to her apartment by her school and it did the same thing, she can only connect to unsecured connections, but not her own. I had her bring the laptop back to her mom's where I tried everything again, no good. I reloaded the computer at her mom's and she could finally connect to her mom's using the wireless connection, but still cannot connect at her apartment. Oh, and also now it will not connect at my house! Windows gives a message that it is unable to connect and you do not even have a chance to put the network key in. Also after clean install, to connect at Home using wireless was selected. If anybody has any suggestions, I welcome any advice.

Below is what I have already done:

[1]The wireless device does have the latest driver
[2]Removed the connection from my gateway
[3]The laptop wireless device does support IPv6
[4]changed Network ID to Home computer instead of Domain
[5]Made sure that Network Discovery was turned ON
[6]Disabled the DHCP Broadcast Flag (recommendation from Microsoft) (this was actually my last resort!)
[7]Ran the Wizard to set up a new connection or network
[8]Also made sure the following was set to Automatic and Started in Services:

* DNS Client
* Function Discovery Provider Host
* Function Discovery Resource Publication
* Peer Networking Grouping
* HomeGroup Provider
* HomeGroup Listener
* SSDP Discovery
* UPnP Device Host

Also, the Troubleshooter in Network and Sharing Center does NOT find a problem.

Could this be a problem with the Windows 7 Professional version? I am at a loss here.

Thank you!




The Problem: Cannot access homegroup because I am told "Homegroup Password Incorrect."

Before anyone flames me, I have spent at least 10 hours over the last week trying to find why in the world I have such a stupid issue. Please only serious "helpful" responses. I am not a dumb$ss because I can absolutely follow directions, type a password correctly, and check settings. With that said, I have nowhere else to go. Please help me Moderators and other experienced members.

My computers:
1. Compaq Presario Desktop SR5500f series
Windows 7 Ultimate Japanese version
Connected to router directly with ethernet cable

2. NEC Japanese laptop with Windows 7 Starter Japanese version, connected to router via wireless

Router:
Linksys WRT54G V8 updated firmware last week
Windows Compatibility test shows 100% OK

What I've read: "Windows 7 is the EASIEST for setting up network sharing"

My Experience:
* First I could not create a homegroup from my Compaq. I read forums and updated Regedit and Services.msc. I was able to then create a homegroup.
My laptop was unable to even see the homegroup, so I spent more time updating various parts and was able to finally have the laptop see my created homegroup.

*Second, I tried this part at least 20 times with many passwords, many restarts, many settings verifications and changes all to no avail. When I enter the password on my laptop to join my created network, it says "Homegroup Password Incorrect." I am in the "Home" network, not Work or Public.

*Third, For Both Computers: I did the time update sync (with different services), I did the IPv6 checks, I restarted, I edited DisabledComponents in the Regedit, I edited Peer Group Networking and PNPG to all "start", i checked the network adapter properties and all was OK. I checked the advanced settings and turned ON network discovery and file sharing, 128 bit and 40 bit encryption, and tried both options dealing with passwords.

*Fourth, I've read nearly every post on this forum, overclocked.net, sevenforums.com, and checked the search engines, Microsoft's website and have found a few others with the same problem but no actual answer to fix it.

So to recap:
I can create a homegroup from my windows ultimate desktop. I can access internet from my windows starter laptop and can see the homegroup but cannot join it because the password is ALWAYS incorrect. I can actually see my desktop's public folder only, if I look under the network itself, not the homegroup.

Please help me. I was a Mac person many years ago and switched to Windows and like it much better despite it being 10 times harder to use than mac. Now, I really don't care any more but I just want my laptop to be able to connect to my home desktop pc and I can't do it in Almighty Windows 7.

Thank you in advance.
Mike




Ok I have 3 Pc's running Win 7 Premium. A laptop, a gaming pc and a media center pc.

I have gone through each computer and shared my documents so i can move around video files/pictures/music to any pc from any pc, but for some reason I can't do it between all of the pc's. I can see the pc's I can see the shared drive but I can't access them. I think I can access any of the public folders on all pcs.

I have turned on the homegroup for all of them using the same password etc.

Looking firstly at my media center pc ( all going through my computer)

Homegroup shows, laptop and gaming pc.
network shows laptop, gaming pc, and media center pc

through the homegroup i can see and access my docs on both my laptop and my gaming pc.
through my network i can see and access my docs on both my laptop and my gaming pc..

so on my media center pc, i have full movement..

now my laptop's a different story...

in homegroup nothing shows up and it says no other homegroup pc is online..
in network i see all 3 pc's (laptop, gaming, media)

obviously in homegroup i can't see so i can't access via that route..

in network from laptop trying to access the gaming pc I can see the my doc folder that is shared, but when i go to click on it i get windows cannot acess error.. ( i just did this 30 seconds ago on the media center pc )

and I get the same problem when i try to access the media center my documents, i can see it, but when i go to click on it.. windows cannot access error.

now from my gaming pc

i can see the my docs and i can acces my docs on both the laptop and the media center, but when i try to go into any subfolder, it says needs access...

basically ONLY my media center pc can see and access the my docs on the other computers.

All folders are set up the exact same way with permissions in the same homegroup. I don't know what else to do.




I really don't know what is going on with my computers but I am having the most frustrating time trying to setup a little networking file share with my desktop with my new laptop.
I've had my desktop since about May and I just bought my laptop a few days ago. Both computers have windows 7 64 bit home premium. I have mcafee on my laptop and norton antivirus on my desktop. I own both of these computers and am the only user so I am the administrator.
First of all, the homegroup works fine on my laptop. I go to create homegroup, works totally fine. I can create a password and it shows through explorer that I am connected to a homegroup. The problem comes from my desktop. I open up the homegroup window through explorer and my desktop detects that there is a homegroup setup through my laptop (named AndyMobile-PC). So I click Join homegroup and I type in the password I created from my laptop and even thought it is the EXACT password from the laptop, the desktop pc says "Error: windows cannot setup a homegroup."
So I decided to shut off the homegroup on my laptop and restart it. I go to my desktop and try creating a homegroup and I can't even do that. Every time I go to the homegroup folder and clicking "create homegroup" windows says "cannot setup homegroup." I've looked online through this website for people who have the exact problem and microsoft techs say to delete the "idstore.sst" in the "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" and I've done that on both pcs and still the same thing happens. The laptop works fine while the desktop does not.
So I figure the homegroup won't work, I try to just share the files manually through explorer with theANDY-PCSHAREDPUBLIC way and I managed to have my laptop and desktop recognize each other through those pathways. My laptop recognizes ANDY-PC (which is my desktop) and the 2 folders I have shared from my desktop as well as a Public folder. I cannot connect to the 2 folders I have shared from my desktop. Every time I try to connect to it it says "You do not have permission to access to these folders, try contacting your system admistrator." I can open up the public folder but I've tried sharing things by drag and dropping documents into that public folder but those documents do not show up on either end. I put some pictures and songs from my desktop into the public folder and it does not even show up on on my laptop and vice versa.
I'm out of ideas. I am running a DNS server address on my desktop so I tried setting one up on my laptop but the same stuff happened and nothing worked. People say rebooting in safe mode could work but I'm not familiar with safe mode so I haven't tried that. Nor have I disabled my antivirus because I'm afraid if that is the key to making it work then I won't want a homegroup or network anyway as I don't want to run my computer without protection. The main thing I've read to work is doing a clean install but I just got my laptop so that can't be it. My only option left is to clean install my desktop but I really don't want to do that because I'm afraid of backing my stuff up and something not backing up right and losing all my stuff. I back my stuff up regularly but there's gotta be another way of making it work without doing that but if that's my last option, I will really consider it if that will make it work.




This question is long and has been written about much in many strings in this and other forums. None have worked for me to date. I think that the issue may be that the provider of answers to these other similar questions seem to assume that the overall setup of the machine in question is in a virgin install state for all the settings. I have been trying to resolve this for several days and have made many changes in many places in an attempt to solve. I am hoping that by providing a very detailed question, someone can provide an overall answer and not just reference an article that gives general overviews. I am afraid that I may have other settings that now require adjusting because they might be different than initial settings. Thank you in advance.

GOAL: To share a password protected folder (and its sub folders) on Windows 7 Ultimate 64 bit PC with other PC’s on a home network. Those other PC’s consist of both Windows 7 & Vista PC’s. User on those other machines would be able to see the shared folder but not able to connect unless they provide a valid user name and password. My wife’s PC would need to be able to have a persistent connection to this shared folder. The other PC’s would only connect as needed for short periods of time. Bottom line is that no one can have access to the contents of this share without entering a specific user name and password. I have no homegroup set up because of the mix of Windows 7 & Vista PC’s. Each user of each PC has a different login.

Here is what I have done so far:
Computer Management- Shared FoldersSharesUsersUser Properties. Removed and then re-added Users. I did this because I found that anyone on my home network can see and access this PC’s Users folders and all sub folders. I put back users because when removed I could not “share” any sub folders under Users, which is where the desired folder is located….
Target Folder needing to be Shared from Explorer- C:Users”My Profile”My Documents”Folder to be shared”. Share with specific users. Added a user account created on the machine specifically to be used to log onto this share from other network PC’s.
Target Folder needing to be Shared from Explorer- Right clicked this folder properties Advanced Sharing Shared this folder. Have since changed back.
Network and Sharing Center- Change advanced sharing settings. The following are chosen: Turn on network discovery. Turn on file and print sharing. Turn off public folder sharing. Media streaming is off. Use 128-bit encryption. Turn on password protected sharing. Use user accounts and passwords to connect to other computers.

I please need all these areas addressed to ensure I have not changed something in any of them that is causing failure. At this moment others on the network can see and freely access this PC’s “Users” folder and sub folder. The desired shared folder cannot be scene in network from any of the other home network PC’s.

Thanks,
Bruce




So, this has absolutely dumbfounded me. I cannot get file sharing or homegroups to work at all, no matter what i try.

I have two computers, a desktop HTPC and a laptop. Both are connected by cat-5e. Both are Windows 7 RC. Both enjoy full internet connectivity with all programs and all protocols. Both see each other via Network Discovery and both are visible in the Network Map.

I use Remote Desktop to connect from the Laptop to the HTPC, and vice versa, and it works perfectly. While doing this, i have full server access to the client's drives and full ability to move and share files through RDP only.

I have taken the laptop to work and it connects to shares just fine, as well as sharing files with other computers just fine. The other computers at work are Windows XP and Windows 2000. This leads me to believe the problem is only the HTPC.

Back at home, neither computer will talk to each other while trying to file share. The HTPC and laptop both come back with an Error 0x80070035 'Network Path Not Found'. Also, while setting up Homegroups, the laptop insists the password is wrong when it tries to join an HTPC-started Homegroup, and the HTPC coughs up a generic 'Homegroup encountered an error' when trying to join a laptop-started Homegroup. Incidentally, they can both see that the other one has begun a homegroup

I have tried...

* Changing IP settings (v4 and v6), currently DHCP-assigned based on MAC addr
* Trying multiple network adapters (2 wired, 1 wireless on HTPC; 1 wired, 2 wireless on laptop)
* Turning off and disabling unused network adapters
* Switching network locations from Home to Work, currently Home
* Turning off and on IPv6, currently on
* Turning off Firewall on both HTPC and laptop
* Turning on Firewall and creating rules for file & printer sharing, currently allowing all inbound & outbound for sharing
* Ensuring that all the Netbios settings are correct
* Making sure that all routing and other services were started
* Editing Policies to set every permutation of LAN Manager, currently LM & NTLM - negotiate v2
* Rebooting both HTPC and laptop incessantly, as well as router and bridge
* Cursing at the HTPC, currently not cursing as i have lost my voice

I am 99% certain that this problem exists on the HTPC and not the laptop, so my efforts have been mainly focused on the HTPC. As said earlier, the laptop performs as expected at work. Also, the laptop just got clean-installed to 7 RC, though this problem affected the laptop while it was still Vista.

This problem reared its ugly head beginning shortly after a clean-install of 7 RC x64 to the HTPC. This did not occur Vista-Vista, or 7000-Vista, only RC-Vista and RC-RC.

Normally a problem like this with the obvious workaround of using RDP to transfer files wouldn't bother me so much, but i use Acronis to back up the laptop nightly to the HTPC, and it cannot as long as file sharing isn't available.

The error code 0x80070035 doesn't seem to be specific to 7; Vista has it too, though Homegroup issues are definitely a 7 problem.

I have come across a hodge-podge of information about this problem with those solutions listed above, as well as others tried and not tried. I am certain that i am forgetting some of the things i have tried to fix this in the list above. There doesn't seem to be one great repository of fixes for this issue, and there doesn't seem to be one true fix for everyone's problem. Also, Microsoft doesn't seem to be acknowledging this issue at all in Vista or 7.

Hopefully someone here will have a solution!

Thanks.




Hello,
I have a client that has about 5 computers set up in their small office, 2 running XP one running Vista and the other two running Windows 7. All on a wired network

The main document server one runs windows 7. The docs are in the public folder on that PC.
All the PC's can see and access these folders perfectly.

The only one that cannot is the other one running Windows 7 (which is a laptop). I have tried normal networking, homegroup.

I think the problem lies in the fact that when the client bought the laptop, They didnt think and gave it the SAME NAME as the computer it needs to access.

I changed the computer name, but as you know this doesn't change the User/Folder structure or name.

Thus far I have been unable to solve it.
As they are the only ones on the Homegroup. I can click on the Icon and see the Shared Documents, Music, Pictures folders etc. But when I click to go in to them it does nothing.

Has anyone encountered this before?

And lastly, I CAN access the laptops public docs from the document server PC?

Thankyou for your time and help.

Michael




I have several computers on a peer-to-peer lan. All computers are running Windows 7 Professional. Folders are shared on all the computers using Advanced Sharing (not the HomeGroup feature).

All works fine and all directories are available on the network as expected. However, one PC has reverted from its shared settings to not shared. This has occurred twice on this computer in the past three months. No one has disabled the shared setting, it just stops being visible on the network. When I check the Advanced Sharing settings it is unchecked. The drive that is being shared is a 1TB WD USB external drive. The drive and all files shows up fine on the local system, but sharing is disabled. I have to enable sharing again and set permissions and it's fine for a few months again.

I cannot think of how this would occur periodically, but it does. Anyone have any idea how this could be happening and how to correct whatever is causing this to occur?




Problem networking Desktop + Laptop
Problem: Desktop can access laptop. Laptop cannot access desktop. Whether both are hard wired into the router, or just the desktop is.

What I can do so far: Oddly enough, after going into the Network sharing center and turning off all PUBLIC sharing options, I was finally able to open Network and see my computer and open it up but once I get to the folders (Video which is a share, and Users which is a generic folder that shows up), I can only access "Users" which does not include my main admin user. Also, video share is set to security permissions for "Everyone" to do "Anything"

OS's: Windows 7 64bit Professional on both

Other things I've tried:

- Made sure TCP/IP was enabled and File Sharing was enabled.
- Went into Sharing center and set Home and Work settings to "Turn on Network Discovery", Turn on File and Printer Sharing, Turn off public folder sharing (I've tried on..), 128 bit encryption, turn on password protected sharing (also tried off).
- Even if I try computernamec$ I get a prompt for username and password but it does not work from laptop to desktop, only vice versa.

Next thing i'm thinking of trying is homegroups. Any other ideas?

UPDATE Wow.. this is so weird. Tried the homegroup thing and it wasn't working out. I left the homegroup, disabled homegroup services on both computers. Went into the home and work advanced sharing settings and set it to:

ON -> ON -> ON -> Streaming off -> 40-56 bit encryption -> OFF -> Use user accounts

for both computers. Now my laptop can access my desktop, but NOT THE OTHER WAY AROUND!?




So i play CA (Combat arms, a first person shooter) at around 30-50 frames per second.
sometimes with tweaks i can get to around 43-57 consistent frames per second.
I CAN PROVIDE MORE INFO IF YOU ASK.
--------------------------------------------------------------
3 Incidents:THE MAIN TOPIC OF THIS PROBLEM
On three different computer i have had One moment of insane and godly frames per second around 300-400frames per second

-First time was on my macbook(Dual core 2.6ish GHz /Nvidia, 256 dedicated RAM/ 4GB RAM/)
I installed bootcamp and after a year or so of consistent lagging around 60 frames per second i was lagging in combat arms more , so i reinstalled my Nvidia graphics driver
After i reinstalled i was able to play CA On full graphics Anti-asling x8 anisotropy x8
overall settings high, and still run at around 200+ frames per second
On CA, fallout 3 new vegas, and some others.
As soon as i restarted my laptop it was back to same old laggy 50-60 frames per second.

-On a Metal laptop I had (for like 3 months before i discovered that buzzing feeling was the comp shocking me for those months)I was playing and randomly one night it started running at insane frames per second, i dont remember too much but it was fallout 3 on low then, full graphics.

And most recent on my current AMD quad core:
I was playing laggy games around 20-30 frames per second with lots of freezes.
I reinstalled my graphics drivers and instantly my games were running full graphics and the insane 200-300 frames per second.
Now currently I am running at 30-50 frames per second with rarely any freezes.

--------------------------------------------------------------------------------
MY current laptop: CA 25-55 frames per second
Gateway - Windows 7 home premium 64 BIT
AMD Quadcore 1.5Ghz A8-3500m
4GB RAM DDR3, I did have 6GB but i gave 2GB to my Brother, it only caused me to be at current lower -10 frames per second.
640GB HardDrive space
AMD 6620G, 512 dedicated ram.
1366 x 768 and my VGA Display 1360 x 768.

Macbook/bootcamp:CA 30-80 frames per second
Windows 7 Ultimate 64Bit
dual core 2.6ish GHz
256 dedicated RAM
6GB RAM
250HD space
Gamebooster report has more info

Programs & settings I use
-------------------------------------------------------------------------
- I sometimes use Gamebooster which gives me +5-10fps
- I also have been trying recently the
windows media player booster program with no signs of fps gain.
- I have fully updated windows 7
- I just now reinstalled my graphics driver with no improvement.
- I reinstalled CA alot and do gain too around consistent 50-65 frames per second frames per second for like 3 days.
-I used overdrive for month and it hurt my comp
It did not boost me and it caused my games to jitter and screech, it also caused my laptop to have other erratic problems
(I even set it to run at just over 100% CPU and had same effects)
I run on the lowest graphics on CA and AMD AMD is set to no v-sync, no antiasling, no anisotropy no triple buffer, and such with 30-50 frames still.
- I have tried in lower resolution screens with only small 10 frames per second.
- I have defragged.

Ideas
-------------------------------------------------------------------------
-On the macbook and this AMD quad core i had been playing for over 10 hours
one person told me it takes times for the comp to heat up and then it will run faster
(Problem is I play around 14 hours per day, and it does get faster but only up to around +10 frames and MUCH faster loading speeds)
If this is true, then how could i implement this and keep my comp in correct temperature.
(I have a fan and when i rarely have used it I think it slows my comp down)

-MY CPUs on this quad core never go above 25%
my GPU according to system monitor Gets maxed out during current CA gameplay
Maybe i can somehow get my comp to use my CPUs instead of my GPU?

-I heard the having 3D vision installed on the Nvidia computers sometimes lags people up so i made sure to disable featues like that when i reinstalled, but im not sure if i disabled anything, maybe you know of some feature i should disable.

I think it was prob some feature/setting not being installed with my drivers.
or some setting put in by windows the the AMD/Nvidia driver messed with.
(maybe reinstalling cleared a cache that lags me)

Why it cant be some things.
----------------------------------------------------------------
-I was not running game booster or any program like that.
-I was not running on low graphics i was running on max, after i saw that i was running so fast on low graphics, in attempt to sea how much it could handle.
I had no overdrive.
-I did no hardware changes at all within at least 1-2 months of the 3 incidents.
(probably longer like 1 year)
-I have reinstalled my windows 7 comp and instantly installed CA and then played it with only consistent 50-60 frames.
-Its not CA because i have tried reinstalling and then not installing CA and still ran slow on fallout 3, and even Runescape.
-I have played on no page file, and on 7GB page file
-I have tried turning off themes, running gamebooster, defragging. and it is pretty smooth but still a measly 43-60 frames per second.
-I was playing On 1280 X 800 res during incident.
I defragment.
-------------------------------------------------------------------------------
Current game speeds
AMD
Skyrim 30-40frames per second
-------------------------------------------------------------------------------
None of the weak fixes are what im after im after those moments of pure..........insanity...
Where i had 300-400 frames per second.
but maybe a weak fix will be all i need to tide it over.

I got 10 headshots in a row easily on CA where 10 headshots in a row is as rare as winning lottery.

I dont want to post this and watch it get ignored like most forums.

I know its possible because it happened to me three times, and on this AMD laptop.

I dont think this is a gaming topic because its about graphics, not a specific game.

It also effected the rest of my system at least a little, that i could load games and such faster.

This is unrelated to this problem but im thinking about buying a 8GB RAM stick for my laptop i just want to know how much would that help. My teacher said that upgrading the ram will speed up my computer ALOT. (RAM is Cheap and yet expensive, I need a cheap 8GB high quality stick, newegg.com said $45 and at Freys instore it was like $25ish, but its like 100miles away now)

I have my CISCO IT essentials so i can easily handle windows tasks and i already have used MANY different tweaks of Regitry, and other system tweaks.

---------------------------------------------------------------------------------

----------G----A---M----E---B----O---O---S---T--E----R--------------------

-----------------------R----E----P----O---R---T----------------------------------

Game Booster Diagnose Report v1.0
Version: 3.5.0.1526
Date: 2012/06/26 08:08:20

----------------------------------
01 - Operating System
----------------------------------

0101 - Operating System : Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
0102 - Language : English (Regional Setting: English)
0103 - BIOS : InsydeH2O Version CCB.03.61.13V1.04
0104 - Processor : AMD A8-3500M APU with Radeon(tm) HD Graphics (4 CPUs), ~1.5GHz
0105 - Memory : 4096MB RAM
0106 - Available OS Memory : 3562MB RAM
0107 - Page File : 1603MB used, 5520MB available
0108 - Windows Dir : C:Windows
0109 - DirectX Version : DirectX 11
0110 - DX Setup Parameters : Not found
0111 - User DPI Setting : 96 DPI (100 percent)
0112 - System DPI Setting : 96 DPI (100 percent)
0113 - DWM DPI Scaling : Disabled
0114 - DxDiag Version : 6.01.7601.17514

----------------------------------
02 - Processor
----------------------------------

0201 - Caption : AMD A8-3500M APU with Radeon(tm) HD Graphics x4 ~1500MHz
0202 - Current Clock Speed : 1500MHz
0203 - L1 Cache : 512.00 KB
0204 - L2 Cache : 4.00 MB

----------------------------------
03 - Video Adapter
----------------------------------

0301 - Card Name : AMD Radeon HD 6620G
0302 - Manufacturer : Advanced Micro Devices, Inc.
0303 - Chip Type : ATI display adapter (0x9641)
0304 - DAC Type : Internal DAC(400MHz)
0305 - Device Key : EnumPCIVEN_1002&DEV_9641&SUBSYS_05991025&REV_00
0306 - Display Memory : 2022 MB
0307 - AdapterRAM : 512.00 MB
0308 - Current Mode : 1360 x 768 (32 bit) (60Hz)
0309 - Monitor Name : Generic PnP Monitor
0310 - Driver Name : aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
0311 - Driver Version : 8.17.0010.1124
0312 - Driver Language : English
0313 - DDI Version : 11
0314 - Driver Model : WDDM 1.1
0315 - Driver Beta : False
0316 - Driver Debug : False
0317 - Driver Date : 4/5/2012 19:20:04
0318 - Driver Size : 1067520
0319 - VDD : n/a
0320 - Mini VDD : n/a
0321 - Mini VDD Date : n/a
0322 - Mini VDD Size : 0
0323 - Device Identifier : {D7B71EE2-D501-11CF-F177-9325BEC2C535}
0324 - Vendor ID : 0x1002
0325 - Device ID : 0x9641
0326 - SubSys ID : 0x05991025
0327 - Revision ID : 0x0000
0328 - Driver Strong Name : oem25.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_Sumo_Mobile:8.961.0.0civen_1002&dev_9641
0329 - Rank Of Driver : 00E62001
0330 - Video Accel : ModeMPEG2_A ModeMPEG2_C
0331 - Deinterlace Caps : {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
0332 - D3D9 Overlay : Not Supported
0333 - DXVA-HD : Not Supported
0334 - DDraw Status : Enabled
0335 - D3D Status : Enabled
0336 - AGP Status : Enabled
0337 - Notes : No problems found.

0338 - OpenGL : 6.1.7600.16385 (win7_rtm.090713-1255)

----------------------------------
04 - Memory
----------------------------------

0401 - Total Memory : 3.48 GB
0402 - Free Memory : 2.21 GB
0403 - Total Pagefile : 6.96 GB
0404 - Free Pagefile : 5.39 GB

0405 - Bank Label : BANK0
0406 - Speed : 1066 MHz
0407 - Total Width : 64 Bits
0408 - Capacity : 2.00 GB

0405 - Bank Label : BANK0
0406 - Speed : 1066 MHz
0407 - Total Width : 64 Bits
0408 - Capacity : 2.00 GB

----------------------------------
05 - Network
----------------------------------

0501 - Description : Broadcom NetLink (TM) Gigabit Ethernet
0502 - Driver Date : 5-10-2011
0503 - Driver Version : 14.8.0.5

----------------------------------
06 - Motherboard
----------------------------------

0601 - Model : SJV50-SB
0602 - Manufacturer : Gateway

----------------------------------
07 - Sound Device
----------------------------------

0701 - Description : Speakers (Realtek High Definition Audio)
0702 - Default Sound Playback : True
0703 - Default Voice Playback : True
0704 - Hardware ID : HDAUDIOFUNC_01&VEN_10EC&DEV_0269&SUBSYS_10250599&REV_1001
0705 - Manufacturer ID : 1
0706 - Product ID : 100
0707 - Type : WDM
0708 - Driver Name : RTKVHD64.sys
0709 - Driver Version : 6.00.0001.6602
0710 - Driver attributes : Final Retail
0711 - Date and Size : 3/27/2012 17:03:36
0713 - Driver Provider : Realtek Semiconductor Corp.
0714 - Min/Max Sample Rate : 5374206, 5374206
0715 - Static/Strm HW Mix Bufs : 5374206, 5374206
0716 - Static/Strm HW 3D Bufs : 5374206, 5374206
0717 - HW Memory : 5374214
0718 - Voice Management : False
0719 - EAX(tm) 2.0 Listen/Src : False, False
0720 - I3DL2(tm) Listen/Src : False, False
0721 - Notes : No problems found.

----------------------------------
08 - Hard Disk
----------------------------------

0801 - Model : TOSHIBA MK6459GSXP ATA Device
0802 - Media Type : Fixed hard disk media
0803 - Size : 596.17 GB
0804 - Interface Type : Serial ATA
0805 - Driver Date : 6-21-2006
0806 - Driver Version : 6.1.7600.16385

0807 - Caption : C:
0808 - Capacity : 578.07 GB
0809 - Free Space : 256.63 GB
0810 - Drive Type : 3-Fixed
0811 - File System : NTFS

----------------------------------
09 - Process
----------------------------------

0901 - 000 Idle 0 0 0
0901 - 004 System 0 0 0
0901 - 114 smss.exe 0 0 0 normal
0901 - 1e4 csrss.exe 0 0 0 normal
0901 - 22c wininit.exe 0 0 0 high
0901 - 270 services.exe 0 0 0 normal
0901 - 280 lsass.exe 0 0 0 normal
0901 - 288 lsm.exe 0 0 0 normal
0901 - 320 svchost.exe 0 0 0 normal
0901 - 370 svchost.exe 0 0 0 normal
0901 - 3f4 svchost.exe 0 0 0 normal
0901 - 1b8 svchost.exe 0 0 0 normal
0901 - 1e8 svchost.exe 0 0 0 normal
0901 - 418 svchost.exe 0 0 0 normal
0901 - 4d4 svchost.exe 0 0 0 normal
0901 - 5d4 svchost.exe 0 0 0 normal
0901 - 648 dsiwmis.exe 0 0 0 normal C:Program Files (x86)Launch Manager
0901 - 684 ePowerSvc.exe 0 0 0 normal
0901 - 6a4 svchost.exe 0 0 0 normal
0901 - 878 svchost.exe 0 0 0 normal
0901 - ab4 svchost.exe 0 0 0 normal
0901 - c44 dllhost.exe 0 0 0 normal
0901 - d4c svchost.exe 0 0 0 normal
0901 - ec4 spoolsv.exe 0 0 0 normal
0901 - f14 csrss.exe 2 170 78 normal
0901 - c88 winlogon.exe 2 6 0 high
0901 - f74 LMutilps32.exe 2 14 4 normal C:Program Files (x86)Launch Manager
0901 - a5c taskhost.exe 2 21 15 normal
0901 - 658 dwm.exe 2 19 2 high
0901 - 8e4 explorer.exe 2 341 239 normal
0901 - dbc RAVCpl64.exe 2 54 19 normal
0901 - d04 PresentationFontCache.exe 0 0 0 normal
0901 - 9b4 taskhost.exe 2 14 4 normal
0901 - e98 atiesrxx.exe 0 0 0 normal
0901 - 9dc atieclxx.exe 2 9 7 normal
0901 - c04 Fuel.Service.exe 0 0 0 normal
0901 - 824 MOM.exe 2 10 9 normal
0901 - 840 CCC.exe 2 73 61 normal
0901 - 568 firefox.exe 2 66 58 normal C:Program Files (x86)Mozilla Firefox
0901 - 3d4 plugin-container.exe 2 33 38 normal C:Program Files (x86)Mozilla Firefox
0901 - 9e8 GameBooster.exe 2 1597 95 normal C:Program Files (x86)IObitGame Booster 3
0901 - 9a4 gbtray.exe 2 54 43 normal C:Program Files (x86)IObitGame Booster 3
0901 - e60 FPSClient.exe 2 35 27 normal C:Program Files (x86)IObitGame Booster 3
0901 - 11c WmiPrvSE.exe 0 0 0 normal
0901 - e40 WmiPrvSE.exe 0 0 0 normal
0901 - d00 audiodg.exe 0 0 0

----------------------------------
10 - Service
----------------------------------

1001 - Application Experience - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - AMD External Events Utility - [C:Windowssystem32atiesrxx.exe]
1001 - Windows Audio Endpoint Builder - [C:WindowsSystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Windows Audio - [C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted]
1001 - Base Filtering Engine - [C:Windowssystem32svchost.exe -k LocalServiceNoNetwork]
1001 - Background Intelligent Transfer Service - [C:WindowsSystem32svchost.exe -k netsvcs]
1001 - Computer Browser - [C:WindowsSystem32svchost.exe -k netsvcs]
1001 - Cryptographic Services - [C:Windowssystem32svchost.exe -k NetworkService]
1001 - DHCP Client - [C:Windowssystem32svchost.exe -k LocalServiceNetworkRestricted]
1001 - DNS Client - [C:Windowssystem32svchost.exe -k NetworkService]
1001 - Dritek WMI Service - [C:Program Files (x86)Launch Managerdsiwmis.exe]
1001 - Extensible Authentication Protocol - [C:WindowsSystem32svchost.exe -k netsvcs]
1001 - ePower Service - [C:Program FilesGatewayGateway Power ManagementePowerSvc.exe]
1001 - Windows Event Log - [C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted]
1001 - COM+ Event System - [C:Windowssystem32svchost.exe -k LocalService]
1001 - Function Discovery Provider Host - [C:Windowssystem32svchost.exe -k LocalService]
1001 - Function Discovery Resource Publication - [C:Windowssystem32svchost.exe -k LocalServiceAndNoImpersonation]
1001 - Windows Font Cache Service - [C:Windowssystem32svchost.exe -k LocalServiceAndNoImpersonation]
1001 - Windows Presentation Foundation Font Cache 3.0.0.0 - [C:WindowsMicrosoft.NetFramework64v3.0WPFPresentationFontCache.exe]
1001 - Human Interface Device Access - [C:Windowssystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - HomeGroup Listener - [C:WindowsSystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - HomeGroup Provider - [C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted]
1001 - IKE and AuthIP IPsec Keying Modules - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - IP Helper - [C:WindowsSystem32svchost.exe -k NetSvcs]
1001 - CNG Key Isolation - [C:Windowssystem32lsass.exe]
1001 - Server - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - Workstation - [C:WindowsSystem32svchost.exe -k NetworkService]
1001 - TCP/IP NetBIOS Helper - [C:Windowssystem32svchost.exe -k LocalServiceNetworkRestricted]
1001 - Windows Firewall - [C:Windowssystem32svchost.exe -k LocalServiceNoNetwork]
1001 - Network Connections - [C:WindowsSystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Network List Service - [C:WindowsSystem32svchost.exe -k LocalService]
1001 - Network Location Awareness - [C:WindowsSystem32svchost.exe -k NetworkService]
1001 - Network Store Interface Service - [C:Windowssystem32svchost.exe -k LocalService]
1001 - Peer Networking Identity Manager - [C:WindowsSystem32svchost.exe -k LocalServicePeerNet]
1001 - Peer Networking Grouping - [C:WindowsSystem32svchost.exe -k LocalServicePeerNet]
1001 - Program Compatibility Assistant Service - [C:Windowssystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Plug and Play - [C:Windowssystem32svchost.exe -k DcomLaunch]
1001 - Peer Name Resolution Protocol - [C:WindowsSystem32svchost.exe -k LocalServicePeerNet]
1001 - IPsec Policy Agent - [C:Windowssystem32svchost.exe -k NetworkServiceNetworkRestricted]
1001 - Power - [C:Windowssystem32svchost.exe -k DcomLaunch]
1001 - User Profile Service - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - Security Accounts Manager - [C:Windowssystem32lsass.exe]
1001 - System Event Notification Service - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - Shell Hardware Detection - [C:WindowsSystem32svchost.exe -k netsvcs]
1001 - Print Spooler - [C:WindowsSystem32spoolsv.exe]
1001 - SSDP Discovery - [C:Windowssystem32svchost.exe -k LocalServiceAndNoImpersonation]
1001 - Superfetch - [C:Windowssystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Themes - [C:WindowsSystem32svchost.exe -k netsvcs]
1001 - Distributed Link Tracking Client - [C:WindowsSystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Desktop Window Manager Session Manager - [C:WindowsSystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Windows Defender - [C:WindowsSystem32svchost.exe -k secsvcs]
1001 - Windows Management Instrumentation - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - WLAN AutoConfig - [C:Windowssystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - Security Center - [C:WindowsSystem32svchost.exe -k LocalServiceNetworkRestricted]
1001 - Windows Update - [C:Windowssystem32svchost.exe -k netsvcs]
1001 - Windows Driver Foundation - User-mode Driver Framework - [C:Windowssystem32svchost.exe -k LocalSystemNetworkRestricted]
1001 - AMD FUEL Service - [C:Program FilesATI TechnologiesATI.ACEFuelFuel.Service.exe /launchService]

----------------------------------
11 - Windows Express
----------------------------------

1101 - System Score : 5.9
1102 - Memory Score : 5.9
1103 - CPU Score : 6.6
1104 - Graphics Score : 5.9
1105 - Gaming Score : 6.5
1106 - Disk Score : 5.9

----------------------------------
12 - Event Log
----------------------------------

1201 - Time : 6/26/2012 8:48:55 PM
1202 - Source : WinMgmt
1203 - Description : Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

1201 - Time : 6/26/2012 8:30:04 PM
1202 - Source : Application Hang
1203 - Description : The program explorer.exe version 6.1.7601.17567 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: fd4
Start Time: 01cd53064db9af16
Termination Time: 0
Application Path: C:Windowsexplorer.exe
Report Id: 9b95fa7e-bf8a-11e1-876f-b870f4b31d76

1201 - Time : 6/26/2012 12:53:55 AM
1202 - Source : Application Error
1203 - Description : Faulting application name: WLXPhotoGallery.exe, version: 15.4.3555.308, time stamp: 0x4f596a69
Faulting module name: atidxx32.dll, version: 8.17.10.342, time stamp: 0x4dddd162
Exception code: 0xc0000005
Fault offset: 0x0000e2a4
Faulting process id: 0x8e0
Faulting application start time: 0x01cd52f315cd647f
Faulting application path: C:Program Files (x86)Windows LivePhoto GalleryWLXPhotoGallery.exe
Faulting module path: C:Windowssystem32atidxx32.dll
Report Id: 592a60dc-bee6-11e1-876f-b870f4b31d76

1201 - Time : 6/25/2012 9:31:57 PM
1202 - Source : Application Error
1203 - Description : Faulting application name: Engine.exe, version: 0.0.0.0, time stamp: 0x4fd800ca
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc00000fd
Fault offset: 0x73bee2d4
Faulting process id: 0xf08
Faulting application start time: 0x01cd52d449c626a7
Faulting application path: C:NexonCombat ArmsEngine.exe
Faulting module path: unknown
Report Id: 225568f9-beca-11e1-876f-b870f4b31d76

1201 - Time : 6/25/2012 12:44:43 PM
1202 - Source : WinMgmt
1203 - Description : Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

1201 - Time : 6/26/2012 10:44:08 PM
1202 - Source : Service Control Manager
1203 - Description : The AMD External Events Utility service terminated unexpectedly. It has done this 1 time(s).

1201 - Time : 6/26/2012 8:47:39 PM
1202 - Source : Service Control Manager
1203 - Description : The Cyberlink RichVideo64 Service(CRVS) service terminated unexpectedly. It has done this 1 time(s).

1201 - Time : 6/26/2012 8:47:36 PM
1202 - Source : Service Control Manager
1203 - Description : The PnkBstrA service terminated unexpectedly. It has done this 1 time(s).

1201 - Time : 6/26/2012 8:35:21 PM
1202 - Source : Service Control Manager
1203 - Description : The Volume Shadow Copy service terminated unexpectedly. It has done this 1 time(s).

1201 - Time : 6/26/2012 8:35:12 PM
1202 - Source : Service Control Manager
1203 - Description : The Windows Defender service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

----------------------------------
End of file - 23098 Bytes


Page 1 of 2.
Results 1...20 of 22