weird windows 7 problem please help Results


Page 1 of 2.
Results 1...20 of 40

Sponsored Links:



So I've been bugging around the net all day long for a solution and trying to figured it out my self, but I couldn't.
I've reinstalled My Windwos 7 Ultimate x32 and went on a fresh copy of Windows 7 ultimate x64... and that's when it stared. After that I've tried Windows 7 Pro x32,x64 and again Windows Ultimate x64 and now again on Windows 7 ultimate x32 but the problem still exist which to me is VERY weird since on the former Windows 7 Ultimate x32 there was no such problem, but now to the problem.
Here is THE problem:
Let's say when I've just install a new copy of Win7 my connection came out with "!" and so no connectivity to the internet. In the Network and Sharing Center the was an red X between "Network" and "Internet". So I've bugged around and do something that helped me fix some network problems year ago: I went on the Local Area Network 2 (my Realtek where is my net connected) Properties/Config/Advanced And put the Duplex mode manually to 100mbps/fullduplex(be default it is on auto). And guess what? It worked I've connected to the Internet and thought every thing is ok. Until I reboot my computer. That's the little tweak I can not even figure out how does it happen. When my Windows 7 Starts again the network tray icon is with "!", but this time it's not connected to "Network" but it has made it by itself a new network connection "Network 2" and has connected to it. By the damn Network and Sharing Center you can not make it return to "Network" you can just delete or merge networks (and guess - can not delete the one you are connected to). So I again went to Properties/Config/Advanced and change it to 10mbps/fullduplex and... it suddenly returned to "Network" and every thing was ok. The next startup I do the same and it makes "Network 3" and go from 10 to 100 and again it returns to "Network"... and so on every single startup I have to do this... it's very annoying... Another way to fix not by change configs I found out that after the start up if I unplug and replug the internet it automatically returns to "Network" and it's fine.
By the god, what devil makes windwos make this new connection every time???
Damn I've searched the net and this forum on network problems and etc and nothing yet work, no Bonjour, no not allwoing to shut down... nothing for now. If any idea or suggestions I'm open... and the god if no suggestions please find me a boxing sack with the logo of Microsoft...




I can hear my C hard drive thrashing away when my system is idle, and even when my system is running programs.

Thought it might be Firefox that's using the hard drive a lot - checked it out, uses the hd a bit but no more than usual, but I can still hear the hard drive clicking away. So I close Firefox. Still going.

Tried switching browsers to Chrome, and even that doesnt have an awful lot more disk usage per cycle than Firefox did. But regardless of whether Chrome was open or not, I continue to hear the hard drive thrashing.

Tried using IE as my main browser, still thrashing. (But IE has the least disk usage out of the 3 main browsers I found - I can still hear it thrashing though )

I checked out Windows Task Manager, but none of the processes shows heaps of disk usage. I then tried Resource Monitor and 'System' with PID 4 appears at the top of the list of processes sorted by disk usage. But there are heaps of sub-thingos (Forgive my jargon ignorance) running under 'System', so which one is causing the disk thrashing?
I disabled Windows Media Network sharing process that has been suggested on the forums, with no change in disk usage.

I remembered a friend of mine mentioning disabling Marvell/other manufacturer's leftover RAID drivers when installing a new PC [Sometimes they're installed along with mobo drivers] (Where the system has no RAID array installed) slowed his disk usage down.

I have no RAID array on my PC either, but noticed a Marvell driver under the 'System' heading when using SysInternals Process Explorer.

I also noticed some other errant drivers, perhaps one of these is causing the disk usage problem?

The whole thrashing business is awfully random - will start and go on for 30 to 40 minutes and then stop for hours, then begin again.

I don't think it's a virus, as I have Avast! and can use the File Shield to monitor what files Avast! is scanning - weirdly, even though I can hear the hard drive in use, Avast! does not pickup/scan any of the files that the disk is supposedly using.

Below are the various screenshots I have uploaded in the hope someone can help me solve this hard drive problem before it wears out and dies a lonely, premature death :P

Stray Marvell Driver.png - Windows Live

Stray AMD Storage Filter Driver.png - Windows Live

Dump Disk Processes 1 3rd Oct.png - Windows Live

I downloaded SysInternals Process Monitor from
Process Monitor

But the program is so much more complex than Process Explorer and I have no idea how to use it.

Can someone please tell me how to run a trace through the events that may help determine which of the running processes analysed in Process Monitor is/are the ones that are causing the high disk usage?

Some More Analysis
Restarted in safe mode (no networking) and went into Resource Monitor (Part of Windows 7) and SysInternals Process Explorer (From Microsoft TechNet) to see if I could isolate the problem.

The entire time I was in safe mode, the hard drive kept on thrashing! :O
I started up Resource Monitor first and saw that 'System' with the PID of 4 was still the most disk-hungry process. Disk usage went from 100KB/sec to 1MB/sec as it did before when logged into Windows 7 normally.

I also saw
svschost (netsvcs),
svchost (secsvcs)
svchost (dcomlaunch)
and other processes like
wmiadap.exe
wmiprvsv.exe appear. The 2 wmi processes disappeared after a short while leaving svchost and 'System' remaining.

I closed Resource Monitor and fired up Process Explorer, and found some weird-looking processes:

Under wmiprvsv.exe there was a file called locale.nls, with no manufacturer name/description (In contrast to other services/sys files which have 'Microsoft Corporation' as their name)

Under each of the svchost.exe processes, out of all the files that had name descriptors (Microsoft Corporation), there were a few without name descriptors that caught my eye:

A file located in Windows/Globalization/Sorting/Sortdefault.nls
A file called locale.nls (Sorry didn't note down the file location)
A file located in Windows/Registration/R00000000000.clb
A file located in Windows/System32/C_28591.nls

All of the above files except for the R000000.clb one were found in svchost, lsass and csrss.

The R00000.clb file was found only in svchost.
I noticed these files because they had no name description next to them - could any of the filesI mentioned be contributing to the disk usage problem?

Hard Drive Thrashing Continues Even After I Logout
I own my own PC and use an administrator account (Not the default 'Administrator' account, but my own account that has admin privileges).

I tried logging out of my regular account and into another limited account I have on the PC. Not only did the hard drive thrashingcontinue while I was logged out and at the Welcome screen,but it continued even after I had logged in to the limited account.

Pretty weird hey?




Ok, I have tried everything I know of. My XP machine can see/access my windows 7 machine BUT the windows 7 machine cannot see the XP. Both machines can ping each other. the Win. 7 is running mcafee free trial they give you and the XP is running Norton. Turned off both firewalls, no luck. I have seen a lot of the same problems on here. Also, they are in the same workgroup, discovery is on ..etc. all the things that should be done are done. One weird thing though is that I was able to see the XP machine when i refreshed it, but when I pressed refresh again it was gone never to return. no settings were changed in that time from when it came up to when it went away.

PLEASE HELP




Hello everyone.

I have Windows 7 RC1 (Build 7100) installed on my office computrer for testing against our current infratrcture so we have a good idea on how it will react when its finally released for sale.

Now its been running fine, except for a printer issue which im not to fussed about, for a week and a bit until mysteriously it dropped its connection from the Windows 2003 Enterprise 64bit R2 domain controller. When trying to login to the machine after the incident, it said "The trust relationship between this worksation and the primary domain failed". Yeah fair enough, I have seen this before on windows XP machines. I deleted the account on the domain controller, then added windows 7 to a random work group,restart, and attempted to add it back.... Which failed. The domain could not be contacted...

Now, i logged in to the local machine and tried to ping the server. Nothing.

I ping the ADMIN server which is sitting right next to the main domain controller running on the same switch. Success - Not a connectivity issue

I can surf the internet, and I am posting this problem from Windows 7 now...

Occasionally, when i try to ping the server, 1 reply will come through and then timeout on the rest but most of the time it will just timeout on them all.

I get my ip address from DHCP running on the domain controller and that is still working fine! I can release and renew the lease.

I have a dual boot setup on this computer with Windows 7 and Windows XP. When i boot into XP, i can ping the server fine and have logged into the domain.

Now things I have tried to rectify the problem:

Delete account from the domain controller and attempt to rejoin the domainDisabled firewalls on both end (Windows 7 and Windows 2003 Server)Changed the computer name on Windows 7Pulled my hair out!Signed up to this forum :P

Hopefully I have given someone enough information to help nut out the issue, but please if you need anymore information I will be happy to give it to you. I don't want to go back to XP, windows 7 is nice!!

------------------------------------------------------------------------------------------------------------------------------

And the problem has magically fixed itself with no intervention from me...

Just started pinging the server and I am back on the domain right now...

weird




Hi all,
Old laptop had XP. Died. (no, the issue is not the hard drive).
Got a new laptop with Windows 7. Took out hard drive from old computer (Samsung model MP0804H, IDE PATA 80 Gigs), bought a generic enclosure (that operates of two USB ports for power and data).
Upon plugging it in I get the dialogue box which states УInstalling device driver softwareФ УUSB Mass Storage DeviceФ which eventually stops showing the pic I have attached.

I can hear it spinning and the red and green light flashes, soon remaining almost only red.
Disk management will not detect it nor does it appear in my computer. But it does appear in Devices and Printers as УUnspecifiedФ (and some weird characters) (see other photo, with highlighted circle).
Cannot for the life of me figure this out, nor can other I had asked.
I thought perhaps I need to install the driver for the Samsung Hard drive but was assured by friend who knows more than me, that isnТt the problem as windows should install a driver automatically,
Please help! Driving me NUTS! Attached Thumbnails а а Last edited by dumbfounded; 02-06-2010 at 12:59 AM. Reason: more specifics Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left; а JavaScript must be enabled 02-06-2010 #2 cybercore Premier Member Enjoys Windows 7 Forums а
Join Date Jul 2009 Posts 7,900 Welcome to the forums, dumbfounded.

1. Computer => Right-Click => Management => Disk Management =>

=> do you see your Hard Drive there ?

2. When windows automatically installs new device, do you get the message that the driver has been successfully installed ?

Did you check the option to search internet for drivers ?




Alright, as mentioned, this is a strange problem for me. Previously I had the settings in both host and client setup and both work very well; client PC get internet connection whenever the host PC connected. However, it no longer get the internet connection from host PC, after a few days of my ISP down time. I am not sure what's the problem that can cause this.

Below are my PCs configurations:

Host PC

Windows 7 x64 Pro
Two LAN cards: One is connected to an ADSL modem provided by ISP, the other one connected to cross-over cable

I had both LAN cards bridged together because previously I can't get the ICS and homegroup worked together without bridging. So now I have only one MAC bridged network in host PC. I used manual dialer for my broadband connection and I have enabled ICS in the dialer. My bridged LAN has DHCP enabled, and it automatically get an IP of 192.168.1.6 with Gateway and DNS Server 192.168.1.1. (I access my modem by this IP as well).

Client PC

Windows 7 x64 Pro
One LAN card: Connected to cross-over cable

The LAN card has DHCP enabled as well. The IP it get is 192.168.1.5 and Gateway and DNS Server 192.168.1.1.

--

With these configuration, I can have the file sharing worked, as well as the Homegroup. But internet connection still doesn't work for my Client PC even though I had enabled ICS on my host PC. I had tried to set the Gateway and DNS server on Client PC as my host PC IP (192.168.1.6), but it still doesn't work for me. (I had previously used this configuration and it works, I don't know why it doesn't work now)

At the Client PC, there is one red cross in between the network (center) and internet (right) at Network and Sharing Center. When I clicked on it, it starts diagnose and it told me that 'the DNS server isn't responding' and it doesn't fix the problem for me. And when I check the full mapping of the connection in Client PC, Below is shown, with no connection to internet while the host is connected to internet.

Yfrog - problemc

I had tried to uninstall the LAN driver, update the LAN driver, run netsh winsock reset, run netsh ipconfig /renew, reset IE settings, but still seems deson't solve the problem.

And one thing surprises me is that even my host PC full mapping shows that I am not connected to internet, this is really weird as I am connected without problem and the first page of the network and sharing center shown me I am connected.

Yfrog - 39533861

Yfrog - 14949721

I suspecting the problem is caused by my host PC but I did everything that I know of but the problem still persists. Both PC doesn't change anything during the ISP downtime, and when the connection is back, this problem just suddenly come out from nowhere.

For my host PC, I had tried to uninstall drivers for both LAN cards, re-bridge, recreate the dialer etc. but still cannot solve the problem.

Any ideas guys? I knew it will be easier if buying a router to do internet sharing but I am kind of tight in the budget, and this p2p method works pretty smooth without problem except this time. Hope any experienced networking expert can shed some light on this problem. If you require to know any info, just ask me, I am more than willing to provide any infos.

--

Anyway, I would like to know is the internet sharing works without router? I checked on the guide for ICS and I found it is just using Wired Hub (which I presumed is Switch) and with ICS enabled, all computers can get the connection. Is it true? Switch is much more cheaper than a router, so I am thinking if a switch can solve the problem, I might consider getting a switch, but of course I would like to solve the problem without buying it.




Hey everyone,

So here is my problem. I was refastening my wireless card after taking the precautions of turning my system off and ground myself (literally a simple 1 minute project)..what happened next was that i must have touched something (I have no idea what, I thought i just tapped my mobo real quick) and the computer miraculously turned on, however what came up was my mother board interface and options to mess with my bios settings) and if i didn't access those settings it would just take me to a screen that said "operating system missing" .

so thinking it was just some wierd glitch i restarted my comp but it happened again. Then i consulted the internet to see what other people did who have had this problem. One problem i found was that it might have been trying to boot from other drives, like my external so i unplugged my external and restarted it...still nothing...

then i read that maybe my boot drive got switched from my Hd's to something else like the disk drive, i checked this and it did seem that something was weird in the boot 1 slot so i switched that out with my HD's and restarted, still nothing.

then i read to trouble shoot i should switch the boot to my disk drive and try to run the OS off the disk and repair it that way...tried to do that and still nothing....actually things got worse...now for some reason i can't even access my BIOS settings and I am completely lost.

somethings that might be handy....the install disk i have is actually windows vista x64...i digitally upgraded to windows 7 x64

I run two HD's in raid

any help would be greatly appreciated and sorry for the novel i just felt it was important to explain every detail

thanks
zep




Hi,

My windows keeps getting stuck regardless of whatever software I am using. Every few minutes it says (NOT RESPONDING) at the top of whatever window that I have open. I checked task manager and there it says CPU Usage and Memory Usage is relatively low so that does not seem to be a problem.

I also checked Resource Monitor and there the only weird thing that I notice is the Disk Response time which is between 5000-8000ms for some stuff. I have attached a screenshot of that. I have run every HP Diagnostic tool and it doesn't find anything wrong with my laptop. I have formatted/re-installed windows on my system several times so I dont think the installation is a problem either. Could someone help with this please? Attached Thumbnails а Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left; а JavaScript must be enabled 06-09-2012 #2 Saltgrass Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Just trying to help а
Join Date Oct 2009 Posts 6,555 Re: Windows 7 Ultimate 64-Bit on HP Probook 4530s stops responding The response times do look a little strange, mine show 3-8 ms.

I see you have 2 drives the same size. Have you tried disconnecting the second one? I have seen situations where a bad drive would mess up the system.

Do you hear any strange noises from the drive/s?

How old is this system?

Have you checked to see if you can re-seat the drives?

Chkdsk did not show any errors on the drive?

Since you have reinstalled, that would seem to eliminate a virus problem. Was it doing this before you reloaded AVG? Does it happen in safe mode?




Lately my PC has been weird, whenever i launch any game my computer just turns off but in a verry unusual way, The Screen goes black, the pc fans stop spinning, nothing is working, but my power button is still bright blue (showing that the pc is still on but its not), i press the button, nothing happens and if i un-plug the power cable, the power button stays on for about 10 seconds, then when i plug the power cable back in the pc turns on just normally like every time, but i still get crash if i launch a game, this is my pc Configuration:

Graphics Card:
Geforce GTS 450

Processor:
AMD Phenom 9150e Quad Core Processor 1.80GHz

Ram:
4GB (2GBx2)

System:
Windows 7 Ultimate 32-bit

Power Supply:
230V

Age:
My Pc is Exactly 3 Years old

*NOTE:* This has been happening for a couple months now and its getting verry annoying, i'm thinking of buying a gaming PC but that costs г3,000 and i need a good working PC while i save up money, it would be a great help if you could tell me whats wrong and if you ever had experiences with such a problem

*NOTE:* I have reinstalled Windows a few weeks after the problem accoured, it did not fix it. I also updated all my drivers, still not working...




preface, i am fairly competant with this stuff. with win 95, 98, and xp i could boot into DOS and use commands to overwrite files and get problems fixed. but can't do that any longer....

i have an HP p6320y and the only thing after market as of now (i jerked out a lot of stuff) on the MoBo is a BluRay drive. i replaced the DVD drive here while back, but if it works fine in 7, there should be no issue.

i have talked to 3 Microsoft techs, and no luck. this is getting extremely infuriating, its beyond frustrating or inconvenience. its like, full on technological anger management meltdown now. so let me recap what i have done, what the techs have done, and how nothing is fixed.

first of all, what i have done: i have an HP with OEM win 7 x64 home premium on it. i have in the past ran win 8 developer preview. actually i have installed that several times just to show family members at different times what is coming. install program worked perfect, OS worked perfect on my pc. but now that i have paid for it, nothing. at first i installed as upgrade on my OEM and chose to keep nothing. it does the whole install process on the desktop, when the computer restarts to set it up, the screen comes up to the blue window logo screen with spinning dots, shows it processing to 75%, then restarts again and hangs at that same screen for like 2 hrs. then it says it could not install windows 8 and will revert back to win 7. the weird thing is, when it hangs, the hardrive is completely unaccessed. like i place my ear on the hardisk itself, no sounds, no clicks, no searching. the HDD access light on the tower is just ON. no blink, not off, just on. why the heck is there no activity? why does the computer just start and show me a graphic of the window? shouldnt it be accessing and working? after about 45 minutes, it says it's not able to uprade and will revert to how my computer was to begin with and rolls back to win7. great.

after that i tried to install it with the set-up disk as bootable, and to choose customer, and full install on formatted hardisk. does the exact same thing.

after that i decided to use a family member's full retail install, and after it was installed, i re-registered it with my OEM key, so this is a completely clean retail win7 install. no bloat, no nothing. i unplugged ALL devices, retried. it still hangs at the same screen. it never recovers from the second restart!!

so after that i formatted c again, and installed the OEM OS back on it, redownloaded the upgrade exe, and tried again, and still nothing.

now i called tech support friday, saturday, and sunday. 1 guy did a remote access but couldnt find anything. the next guy had me do a dskchk and that did nothing. and the third guy did a remote access and changed some setting that i couldnt see any value in changing to begin with, we did anothe rinstall, this time, still nothing. he said i will have to speack with tier2, but they can only talk to me tomorrow. all 3 guys it hangs at the same spot! why will this idiot box not upgrade!?! THERE IS NO CONFLICTS! ITS A BRAND NEW FACTORY RESET OS!!! i'm seriously going to lose my sanity over this because what should be a 1 hr upgrade has ruined my whole weekend, for no reason i can figure out.

i have disconnected everything from the MoBo that can be disconnected. and still, nothing. i never save backup sor anything with this. i just have all my install discs ripped as ISOs on an external hardrives, and start at the top and re-instal each one, one by one. and i do that with all my personal files to (video, audio, pictures, documents, etc)

i just can't think the driver issue would matter, because what if this was a brand new PC build i did myslef? how would i install the drivers, if i can't boot to a desktop to begin with?

does anyone out there know at all what is the deal? why am i not able to install this upgrade? please, someone. anyone. help.

no matter what, i can not get it to update. why is this so hard to do? why will this upgrade just not work? i have redownloaded the file liek 4 times, and wasted 3 days now. trying. my eyes are killing me, my head is killing me. for 3 days straight i been crawling around unhooking cables, removing peripherales. the side panel and front panel of my pc are removed, all the hardrives are removed, all the pci devices are removed, i have wiped and formatted C:/ drive so many times it should be perfectly defragged now. there is just no hope or answer in sight i feel. i will try again with absolutely everything unplugged from the MoBo, but if my grandpa had this computer, how the heck would he get the upgrade done? he doesnt even know how to eject the cd. and if i have to re-install.... i don't want to have to do all this garbage all over again. i just want some kind of solution.

i have ran windows 8 dev preview 3 different times... what makes this time so different?




Hey guys, windows 7 has been acting very weird. When ever I try check for updates, I get the Error code 80072F8F. I have read about the time change thing, and I follow all the instructions to the T. Still nothing works, I also tried turning off my firewall just to see if that would make much of a difference.

It didn't. I'm running on Windows 7 RC Build: 7100. Im using AVG Free Anti-Virus, and I have been using it ever since I got windows 7. It has never gave me a problem before. I'm running the 64 Bit OS also, which is what i have been using trouble free since I got Win 7.

Also, I have been experiencing a lot of out of date security certificates on websites, and my Windows Live messenger just stopped working. I think I'm virus free because AVG didn't pick up anything, and I don't visit bad sites, or download anything.

Please give me a helpful hand here as I'm really disappointed that things are turning out this way.

Thanks,

Rob

Found out why Windows update wasn't working. Seemed to help after repairing the OS. Works good as new.




I have a problem with my display on my Lenovo T61 ! while surfing the net, and a browser already opened, my current browser starts to flicker on/off and reopens new browsers with the same page i'm using ! I know it sounds crazy, but i tried a fresh install to solve the problem (win 7), and the problem persists. I have the latest drivers for the system by means of windows update, and Driver Checker. Browser keeps refreshing constantly but allows me to continue using windows normally. Please help




Dear all,

hope someone can help.

I just upgraded my Windows 7 7000 build to 7022 (32 bit). I did not do a clean install based on the fact that my Vista to 7000 upgrade went just fine.

So, here's the problem: all of my docs are gone! Only the directories within My Music, My Docs, etc. are listed (not the files). My music, pics, etc...all gone.

I have noticed though that my hard drive capacity is more or less the same. This is a good indication that the files are sitting somewhere else in my HD. Now, this new file structure is a little intimidating and after running several searches in Windows Explorer I gave up. I know the files are there; I just need a little help to find them.

If someone knowledgeable is reading this, would appreciate your kind suggestions to find my files.

As soon as I find everything I plan to wipe my hard drive and do a clean install. Lesson learned.

Thanks in advance.

To the administrator...I apologize for double posting. Please delete this message for me (again, I'm very sorry).




I took an install disk from mt friend and i puted it in teh computer, Then I made a 20GB partition using the one already found in my XP. When I boot from the DVD, it takes 10minutes to go the Select region and language screen. Then another 5 after that to press next. Then I select the partition I made in XP(NTFS) and then it does "Copying new files" but it doesn't continue , then after a couple minutes (about 10-15) it gives some error that says that i dont have driver to the install or somthing like this. whats Weird is that i have successed to instal windows 7 a long time ago on the computer, but not in The usual way in the format but in a way which i puted the disk in the computer and installed the windows like a game instal (hope you know what i meen ). I did this this way because of the same problem that i wrote.after a while the windows started to make problems and i had to format again, bud i couldn't to windows 7 so i format to XP and i stuck with the XP now. I tried to format to 7 many times, same thing. Please help, I'm confused as to why this is happening.

sorry for the bad english :/




I may have posted in the wrong section but im new here, sorry.

I consider myself a decently computer savvy guy for my age, however, this has me completely stumped. so if any of you can tell me weather or not re-installing windows (or any other solution you could think of) would be likely to help, because as much as It would be a pain to go into safemode and copy all my files onto something, i simply cannot wait until the guy who usually fixes my computer gets back from vacation in a couple weeks.

I have an old laptop (6ish years). the history of witch includes a bunch of viruses (before i owned it, fixed years ago) a fried hard drive (over a year ago, imediatly replaced) and recently the screen started falling off on one side (heavily ducktaped). i was running a cracked version of windows 7 (instaled over a year ago) and is a toshiba satalite pro M300.
the other day my cat attacked me while i was using my laptop and in my startled spasms i droped my laptop. it didnt fall far, about 2 feet and it landed rightside up in a way that didnt realy worry me, its been through far worse. but when i turned it on the screen wouldnt work, i was rather panicked until i realized that the screen did infact work but the backlight was gone, i could just barely make out what was on the screen if i held it up to the light just a certain way. When i did i noticed some odd looking messages and warnings and all around a very buggy and non responsive feel about my precious laptop. So i removed all the tape that is keeping my screen in one piece and keeping that one piece attached to the base and quickly noticed that there was a wire that got unpluged. After finding some tweasers the rest was easy work and i just pluged it right back in, and imediatly the screen was working properly. but after having re-taped it i noticed that since then whenever i use my computer half my programs wont launch and the ones that do almost always stop responding imediatly. also my antivirus goes beserk and warns me about retarded things like (thatoneprogram.exe is trying to access windows/programfiles/thatoneprogram ) but its not responsive enough for me to run a scan. Then after a little while it blue screens with a message that goes by to fast to read. One time i tried launching startup repair but after a long wait all I got back was an error. The weirdest part is, that since this all started when i droped it, you would expect it to be hardware related, but since everything works fine in safemode, and the antivirus goes nuts, and etc it makes it look alot like a software problem, specificaly a virus or something of the like.

Please tell me if you think you've figured out whats wrong or if you have any questions or feel like ive forgoten to mention something. im kinda desperate. either way, thanks for reading to the end.

EDIT: just ran startup repair again and at the end of a freiking massive startup repair report it sais

Root cause found:
-------------------------------
unspecified changes to configuration might have caused the problem.

Repair action: System files integrity check and repair
Result: failed. Error code = 0x45d
time taken = 345821ms

what does it mean?




I've been dual-booting for about two months now on two seperate HDs. One HD is XP Pro SP3 - it was my first one - and then I added another HD and installed Win 7 on that.

Recently, my 7 was crashing in a BSOD hard when I was playing a video game. I posted the minidump files online, and was told that it was two issues: my video drivers, and hardware. Well, I un/re-installed the video drivers, and did the most dreaded thing imaginable: flashed my BIOS. The positive is, the new BIOS fixed all my "yellow warning signs" in 7's Device Manager, and everything is running fine, and it didn't even flinch.

However, the BIOS flash totally borked my XP drive. I tried to fix it by both Repairing XP on top (that didn't work), and again, using the XP disc, hitting R, going to the Command line, and typing FIXBOOT. Well, that seems to have REALLY screwed things up. Now, when I reboot or boot up, instead of getting the

"Which OS do you want:
Older version of windows
Windows 7"

instead I get "Bad boot record, please insert disc and hit enter."

Now the weird thing is, if I put in the Win 7 disc, hit a hard restart, it reboots and comes up with the "hit any key to launch from CD or DVD..."; but I DON'T; instead, I just leave it, after that, guess what? It comes to the proper dual-boot "Which OS do you want" page. I then choose Windows 7, and it boots totally fine.

So. How can I fix this? I am open to many suggestions, but it's clear that my XP drive is fried, and since I do have the date from it on an external HD (and also on my 7 drive), I aim to wipe that drive anyway and just use it for storage. So how can I fix my current boot problem, AND eventually get me to only booting up my Win 7 HD? Should I use "EasyBCD" like so many other forums suggest? Essentially, I installed 7 in a dual-boot environment, but now the XP is fried, and Win 7 doesn't want to boot up properly.

Please help!




Hi ya'll!

Yesterday I was looking for a bike on a buy and sell site, I found a nice one and I wanted to see a bigger picture. So I searched for that bike on Google Pictures and found a good pic.

I clicked on it and then Firefox said that this site wasn't secure and I might have gotten some viruses, and Firefox wanted me to download some kind of software to remove the viruses. I thought: Well it's firefox, right? It can't be anything bad. So I downloaded it and installed the program and suddenly it told me I had 18 viruses!

But this software was weird, it looks exactly like Windows Defender, but it's called "Internet Protection," and twice a minute I get a pop-up from this program telling me that I have to buy their serial key to remove these viruses.

I already have an anti-virus program installed, Panda Global Protection so I ran a big scan of the whole system and it found NOTHING!

I have the url from where I got this thing:
DON'T GO TO THIS WEBSITE! http://update82.goff.cz.cc/ DON'T GO TO THIS WEBSITE!
Just in case this could be of any help...

Now for the real problem!
I CAN'T REMOVE IT! it's not listed as a program in "Add or Remove a Program" in the Control Panel. It has installed itself in C:windowssystem32rundll32.exe

Please check my pictures!

So, in short, I have no viruses on my computer. But I have a fake Windows Defender called "Internet Protection" telling me that I have 18 of them. But I can't remove Internet Protection cause it's installed in C:windowssystem32rundll32.exe

Thanks in advance!

Quizzious Attached Thumbnails а а а а Last edited by Trouble; 04-18-2011 at 09:45 AM. Share Share this post on Digg Del.icio.us Technorati Twitter
Operating System Windows 7 Home Premium 64-Bit
Computer Type Desktop, Gaming Computer
OS Service Pack Service Pack 1
DirectX Version DirectX 11
CPU Type and Speed Intel Core i5 2500K 3,3Ghz
CPU Cooling Antec K№hler H2O 620
Motherboard Chipset ASUS P8Z68 V-Pro
System Memory Type Corsar Vengeance 8GB DDR3
Video Card Type and Speed ASUS nVidia GeForce GTX 560 Ti
Video Card Temperature 25-30 ░C
Power Supply Unit (PSU) Corsair AX 750W
Computer Monitor LG IPS226-PN
Hard Drive Western Digital Caviar Green 2TB
Optical Drives Samsung SH-222AB
Keyboard and Mouse Logitech G500 Mouse, Logitech G110 Keyboard
Anti-virus Software AVG Internet Security 2012
Computer Skill Level Average Ability
Windows Experience Index 5,9
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left; а JavaScript must be enabled 04-18-2011 #2 MikeHawthorne Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Enjoys Windows 7 Forums а
Join Date May 2009 Posts 1,702 Re: Fake Windows Defender called Internet Protection?! Hi

This is a virus.

Download and run Malwarebytes in safe mode with network support and it should remove the offending malware.

Malwarebytes' Anti-Malware: Malwarebytes

I've seen this over and over in the last 6 months.

Here's some info about it.

To Fake Antivirus Information.

Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware - How-To Geek

Mike




Hello guys,
First of all..im not a person who knows alot about these kind of stuff but here is the situation....i have this laptop acer aspire 4530(its around 2 yr usage)..it is still same as first i bought it..nothing were changed except for 2 stick of ddr2 ram (1gb each) ,[ system bios version 1.3334,vga bios version Nvidia 62.77.28.00.01 ]..mostly i used win 7 32 bit each time fresh install window..also use the same driver each time format which i got from "acer europe driver download".It works just fine previously...

For about a weeks ago i had these multiple nonstop Bsod...Irql_not_equal_or_less (most of the time) ,apc index mismatch, memory management, cache manager , page faulty in non page area ,and few more i cant remember....been reading alot of forums but still came out with no sololution..idk wht is the cause...it bsod while im internet browsing,playing games,copying/transfering files..and even while MSE virus scan...idk wht else should i do..i replaced a new thermal paste and cleaned the dust...still didnt solve it(but my fan is much quiet now also solve heat prob lol)...i replace a newly bought a stick of ram 2gb ..still didnt solve it....but the weird thing is it doesnt bsod while watching dvd...only when running programs like games...mse scanning , media player out loud...and surely when i tried to stress it by running few more programs .

the sympthoms before going bsod is the fan is turn to be loud..and slightly lag on windows...i have updated my Mse and run my other Hdd drive and no virus/threat found...i cant go for full scan coz it surely go bsod for a long run program like that...

Can leftover remnants be the cause even though after i format to new windows?if so how do i see and remove it? Please..can anyone help me solve this problem....i cant do anything..im so tired and frustrated ...

Below is the minidump i manage to upload from My system drive,Thank you so much for your concern . Attached Files bsod.minidump..rar (215.2 KB, 5 views) Share Share this post on Digg Del.icio.us Technorati Twitter
Reply With Quote .postbitlegacy .postfoot .textcontrols a.post_info_button, .postbit .postfoot .textcontrols a.post_info_button { background: url(/images/post_infobox.png) no-repeat transparent left; padding-left: 20px; } .postbitlegacy .postfoot .textcontrols a.post_info_button:hover, .postbit .postfoot .textcontrols a.post_info_button:hover { background: url(/images/post_infobox-hover.png) no-repeat transparent left; а JavaScript must be enabled 04-21-2013 #2 usasma Microsoft Community Contributor This member is a certified Microsoft Community Contributor at Windows 7 Forums. Click here for more information from Microsoft. Microsoft MVP - Windows Expert
- Consumer а
Join Date Mar 2010 Posts 1,333 Re: Multiple Bsod even after new ram and fresh install window Please provide this information so we can provide a complete analysis: How to ask for help with a BSOD problem

SP1 isn't installed, please do the following:
Installing Windows 7 Service Pack 1
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates (may take repeated visits)
4. Visit Windows Update and get Service Pack 1 (usually under Important Updates). Read these notes for installing SP1: Steps to follow before you install Windows 7 SP1 and Windows Server 2008 R2 SP1 from the Microsoft Download Center
5. Visit Windows Update and get any other available updates. May take repeated visits, but keep it up until you get several "Windows is updated" results.
If you're having difficulties with installing a Service Pack, please use the SURTool from this link: What is the System Update Readiness Tool?
Also, check out this troubleshooting link from Microsoft: Troubleshoot problems installing Service Pack 1 (SP1) for Windows 7 and Windows Server 2008 R2

I have had limited success in installing updates/Service Packs when using a "clean boot". I suspect that I'm just bypassing the problem - and that it can come back to bite me in the butt later on. If Driver Verifier is still on, please turn it off. To do this, open verfier.exe and select "Delete existing settings", click on "Finish" and reboot for the changes to take affect.

Please start with these free hardware diagnostics: Hardware Diagnostics

Please update these older drivers (if these are the latest available from the Acer website, don't worry about them for now). Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

mdmxsdk.sys Mon Jun 19 17:26:59 2006 (449716A3)
Conexant Modem Diagnostic Interface x86 Driver
http://www.carrona.org/drivers/driver.php?id=mdmxsdk.sys

HSX_CNXT.sys Fri Feb 13 15:57:25 2009 (4995DEB5)
SoftK56 Modem Driver by Conexant Systems
http://www.carrona.org/drivers/driver.php?id=HSX_CNXT.sys

HSXHWAZL.sys Fri Feb 13 15:58:15 2009 (4995DEE7)
SoftK56 Modem Driver by Conexant Systems
http://www.carrona.org/drivers/driver.php?id=HSXHWAZL.sys

HSX_DPV.sys Fri Feb 13 16:00:17 2009 (4995DF61)
SoftK56 Modem Driver by Conexant Systems
http://www.carrona.org/drivers/driver.php?id=HSX_DPV.sys

DKbFltr.sys Wed Mar 25 23:10:12 2009 (49CAF214)
Dritek Keyboard Filter driver
http://www.carrona.org/drivers/driver.php?id=DKbFltr.sys

b57nd60x.sys Sun Apr 26 07:15:34 2009 (49F44256)
Broadcom NetXtreme Gigabit Ethernet NDIS6.0 Driver
http://www.carrona.org/drivers/driver.php?id=b57nd60x.sys

XAudio32.sys Wed Apr 29 14:20:55 2009 (49F89A87)
Conexant SoftK56 Modem Audio Device Driver
http://www.carrona.org/drivers/driver.php?id=XAudio32.sys

amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F)
AMD storage controller driver - usually from the Windows 7 DVD
http://www.carrona.org/drivers/driver.php?id=amdxata.sys

nvsmu.sys Tue Jun 2 19:04:45 2009 (4A25B00D)
nVidia nForce System Management Controller (nVidia nForce chipset driver)
http://www.carrona.org/drivers/driver.php?id=nvsmu.sys

Analysis:
The following is for informational purposes only.
Code: **************************Sat Apr 20 10:38:53.965 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps42013-23571-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:00:34.243 Probably caused by :ntkrpamp.exe ( nt!KiTrap0E+dc ) BugCheck 1A, {41287, 76, 0, 0} BugCheck Info: MEMORY_MANAGEMENT (1a) Arguments: Arg1: 00041287, An illegal page fault occurred while holding working set synchronization. Parameter 2 contains the referenced virtual address. Arg2: 00000076 Arg3: 00000000 Arg4: 00000000 BUGCHECK_STR: 0x1a_41287 PROCESS_NAME: MsMpEng.exe FAILURE_BUCKET_ID: 0x1a_41287_VRF_nt!KiTrap0E+dc BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Sat Apr 20 10:37:50.940 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps42013-22261-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:00:29.343 Probably caused by :memory_corruption ( nt!MiComputeFlushRange+79 ) BugCheck A, {183, 2, 0, 836eb6cc} BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a) Arguments: Arg1: 00000183, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 836eb6cc, address which referenced memory BUGCHECK_STR: 0xA DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP PROCESS_NAME: lsass.exe FAILURE_BUCKET_ID: 0xA_VRF_nt!MiComputeFlushRange+79 BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Sat Apr 20 10:29:04.722 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps42013-30638-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:21:13.126 *** ERROR: Module load completed but symbols could not be loaded for netbt.sys Probably caused by :netbt.sys ( netbt+1162 ) BugCheck D1, {0, 2, 0, 8e289162} BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) Arguments: Arg1: 00000000, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, value 0 = read operation, 1 = write operation Arg4: 8e289162, address which referenced memory BUGCHECK_STR: 0xD1 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: iexplore.exe FAILURE_BUCKET_ID: 0xD1_netbt+1162 BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Fri Apr 19 19:48:35.537 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps41913-21512-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:03:38.940 Probably caused by :memory_corruption ( nt!MiGatherMappedPages+69c ) BugCheck A, {80606000, 2, 0, 83497c9b} BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a) Arguments: Arg1: 80606000, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 83497c9b, address which referenced memory BUGCHECK_STR: 0xA DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System FAILURE_BUCKET_ID: 0xA_nt!MiGatherMappedPages+69c BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Fri Apr 19 19:40:02.132 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps41913-23836-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:02:28.536 Probably caused by :memory_corruption ( nt!MiGatherMappedPages+69c ) BugCheck A, {8060b000, 2, 0, 82ec3c9b} BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a) Arguments: Arg1: 8060b000, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 82ec3c9b, address which referenced memory BUGCHECK_STR: 0xA DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System FAILURE_BUCKET_ID: 0xA_nt!MiGatherMappedPages+69c BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Fri Apr 19 19:20:32.244 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps41913-23992-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:01:03.648 Probably caused by :ntkrpamp.exe ( nt!KiTrap0E+dc ) BugCheck FC, {8f53f514, 5e27d963, 8f53f488, 2} BugCheck Info: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc) Arguments: Arg1: 8f53f514, Virtual address for the attempted execute. Arg2: 5e27d963, PTE contents. Arg3: 8f53f488, (reserved) Arg4: 00000002, (reserved) BUGCHECK_STR: 0xFC DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: nvvsvc.exe FAILURE_BUCKET_ID: 0xFC_nt!KiTrap0E+dc BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Fri Apr 19 19:18:32.242 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps41913-23524-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 0:08:39.520 Probably caused by :memory_corruption ( nt!MiGatherMappedPages+69c ) BugCheck A, {80601000, 2, 0, 82e9bc9b} BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a) Arguments: Arg1: 80601000, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 82e9bc9b, address which referenced memory BUGCHECK_STR: 0xA DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System FAILURE_BUCKET_ID: 0xA_nt!MiGatherMappedPages+69c BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` **************************Fri Apr 19 19:08:56.493 2013 (UTC - 4:00)************************** Loading Dump File [C:UsersOwnerSysnativeBSODApps41913-25256-01.dmp] Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible Missing Windows 7 Service Pack 1 Built by: 7600.16385.x86fre.win7_rtm.090713-1255 System Uptime:0 days 3:04:12.897 Probably caused by :memory_corruption ( nt!MiGatherMappedPages+69c ) BugCheck A, {80603000, 2, 0, 82ea0c9b} BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a) Arguments: Arg1: 80603000, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 82ea0c9b, address which referenced memory BUGCHECK_STR: 0xA DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System FAILURE_BUCKET_ID: 0xA_nt!MiGatherMappedPages+69c BIOS Version v1.3334 BIOS Release Date 09/18/2008 Manufacturer Acer, inc. Product Name Aspire 4530 ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`` 3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.
Code: **************************Sat Apr 20 10:38:53.965 2013 (UTC - 4:00)************************** mdmxsdk.sys Mon Jun 19 17:26:59 2006 (449716A3) HSX_CNXT.sys Fri Feb 13 15:57:25 2009 (4995DEB5) HSXHWAZL.sys Fri Feb 13 15:58:15 2009 (4995DEE7) HSX_DPV.sys Fri Feb 13 16:00:17 2009 (4995DF61) DKbFltr.sys Wed Mar 25 23:10:12 2009 (49CAF214) b57nd60x.sys Sun Apr 26 07:15:34 2009 (49F44256) XAudio32.sys Wed Apr 29 14:20:55 2009 (49F89A87) amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F) nvsmu.sys Tue Jun 2 19:04:45 2009 (4A25B00D) nvBridge.kmd Thu Aug 27 03:56:43 2009 (4A963C3B) nvlddmkm.sys Thu Aug 27 04:15:53 2009 (4A9640B9) athr.sys Wed Mar 31 21:51:05 2010 (4BB3FC09) MpFilter.sys Wed Oct 31 14:53:22 2012 (509173A2) http://www.carrona.org/drivers/driver.php?id=mdmxsdk.sys
http://www.carrona.org/drivers/driver.php?id=HSX_CNXT.sys
http://www.carrona.org/drivers/driver.php?id=HSXHWAZL.sys
http://www.carrona.org/drivers/driver.php?id=HSX_DPV.sys
http://www.carrona.org/drivers/driver.php?id=DKbFltr.sys
http://www.carrona.org/drivers/driver.php?id=b57nd60x.sys
http://www.carrona.org/drivers/driver.php?id=XAudio32.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=nvsmu.sys
http://www.carrona.org/drivers/driver.php?id=nvBridge.kmd
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys
http://www.carrona.org/drivers/driver.php?id=athr.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys




First of all, hello!

I have a bit of a weird problem; here's the whole story. For the sake of an easier explanation, let us call the PC's I have mentioned PC-A, PC-B and PC-C. So, I first had PC-A and PC-B installed (this was years ago), and the problem first started appearing right away; whenever I tried to transfer a file between the two PC's, that's size exceeded roughly 1 MB, PC-B shut down all connections (which means it lost LAN connectivity, and could therefore not connect to the internet (as the broadband is connected via LAN to the switch)). At first, I didn't think much of this, as the problem is easily avoidable by transferring files using a USB stick instead (Note that smaller files can still be sent without any problem, and the PC's even perform well in Games, when playing LAN). However, I decided to get a third PC (PC-C) up and running recently, and have correctly (as far as I can tell) installed the PC upstairs on a different switch, connected to the LAN and internet as well. However, now the problem has became a bit of a greater nuisance, as whenever I try to send files from PC-A to PC-C, PC-B locks itself down again (my guess is that this happens because the traffic is still being applied to the PC-A-to-PC-B switch, which then leads me to conclude that the problem is in the switch).

I have so far tried changing switches, changing the jack that PC-B is connected to in the switch, changing various options in the Network Adapter settings of PC-B and disconnecting and reconnecting PC-B to the network(both physically, by plugging the cable out and back in, and via the software, by enabling the LAN connection that PC-B is usually connected to as it disables itself after a while (it gets stuck on Enabling... when I try and do this)), and so far the only way to get PC-B's networking working again, is by rebooting the PC itself.

Please also note, that I am able to ping between all PC's before the file transfer, that the other two PC's do NOT need to reboot in order for their network to still function properly, that only files of a filesize of over ~1 MB cause this malfunction, that sometimes (I have yet to see a pattern of this occurring) PC-B CAN ping the other PC's but has a 50% packet loss average, and takes about 3k ms to get a single response, while the regular ping speed is




Hi, i recently got my pc back from repair and noted something weird with my Word... i'm not sure how to explain the problem so i will describe the situation

Usually when working with bullets or numbers, when at the begining of a line, if you backspace, you either get the bullet or number promoted or deleted... but for some reason... when i do it nothing happens.... the bullet stays there as if nothing happened

That's not all, usually when at a line, also with numbers or bullets, that is still empty (aka: havent written anything yet, not even a space), pressing enter would get you out of the list and the bullet deleted.... for some reason, when i do it... my bullets and numbers get promoted by one level...

I have a Windows 7 professional and a microsoft office 2010. I hope someone can help me, sorry for the trouble. Also please let me know if i did something wrong while posting


Page 1 of 2.
Results 1...20 of 40